Posted by Jerome Morris | Today @ 08:06 AM | 251 Views
Built this for an O scale model railroad.
Alaska RR never had a marine division so this sort of just developed over emails in a few days time.
Tug, car float and the ramp to get off the dry land.
Well weathered for that authentic model railroad look
Posted by Angwan | Today @ 04:48 AM | 573 Views
I have a zip zap se the red and black Ford mustang gt the wires came apart can anyone help with how they go back in the right spot
Posted by Mandy Chen | Today @ 03:30 AM | 724 Views
Get your Land SnaiL 930 Electric Skateboard at Beach RC

WhatsApp/Skype: +8613670131260

#BrotherHobby #LandSnaiL #ESkateboard #LandSnaiL930 #electricskateboard #esk8 #eboard #eboarding #electricskateboarding #skateboard #skate #electricscooter #BeachRC
Posted by alex_nikiforov | Yesterday @ 11:25 PM | 1,244 Views
Foxeer Micro Lollipop 5.8G 2.5DBi High Gain Omni RHCP FPV Antenna for RC Drone Airplane

Foxeer Micro Lollipop. Измеряем КСВ. Наземный тест дальности. (10 min 3 sec)

Link: Foxeer Micro Lollipop
Posted by VicT | Yesterday @ 08:46 PM | 1,639 Views
This was the third time learning to fly the Eflite P39 Airacobra using the 12/8 APC prop and 2200 4S SMART lipo. Weather was 3 mph crosswind and 60F so we concentrated on low approaches and go arounds. We found out the lowest power setting for taxi and it turned out to be between 25-30% throttle setting on the DX6 (students) and DX9 (instructors) on screen display. We set throttle cut and moved the throttle up to 25-30% and then uncut the throttle. The P39 broke away from the fabric runway and with in 5 seconds (Throttle Cut Delay) the P39 reached a top speed of about 3-5 mph. We used this same throttle setting on the downwind and then on final with gear and flaps 100 the P39 had a nice descent. We kept her high to clear the 60 ft trees (that have claimed many models) and then once clear used full down (SAFE On limited to about a 40 degree dive) to level off in ground effect (5-7 ft). With only rudder she touched down smooth as silk with this 5 mph taxi power setting. No bounce no guessing when to flare just landing with power on. The hardest part is to take your eyes off the model and setting 25-30% throttle setting. No throttle curve or other adjustments needed.

We tried a 4 yr old 3200 4S pack and got more time but when the countdown timer said 20 seconds to land I made a steep descent clean and put the gear down at about 50 ft. The 2 second setting for gear and 100% flaps was just in time as I touched down in the grass 1 ft away from the fabric...Continue Reading
Posted by Elia82 | Yesterday @ 07:22 PM | 1,903 Views
Does anyone know where I can go fly around Banbury area?
I m new on ce plane hobby,loving it,the flight club is close due covid restrictions,so I m looking to an open area around me to go and practice on my own.
I have a little hobby horizon sportcubs2.
Posted by unboxingexp | Yesterday @ 12:04 PM | 2,950 Views
Eachine TX06 - lightest AIO FPV cam (1 min 56 sec)

Perfect for light tinywhoops! Only 2g with 25mW VTX. 5 Bands, 40 channels.
Posted by eagle60 | Yesterday @ 11:59 AM | 2,965 Views
This is not an ad, but bloody hell if they sell DLE111 with mufflers at 99 usd somebody sould be interested to control!!!
Posted by microbuilder | Yesterday @ 11:07 AM | 3,013 Views
Some files for some builds
Posted by ShonanBeachRC | Yesterday @ 09:53 AM | 3,113 Views
In this video I'm having some fun with my ZD-Racing Raptors MT-16. The ZD-Racing Raptors MT-16 is the little brother of the ZD-Racing Thunder ZMT-10. Its not the fastest car but I think its a fun, complete and good rc car. I'm sorry but sometimes its difficult to see in the video because of the sunlight!

If you like it buy it here!

Please visit my website!


ZD-Racing Raptors MT-16 bashing (14 min 0 sec)

Posted by GroundControlRC | Yesterday @ 09:07 AM | 3,355 Views

Glue & Fly™ F-22 Raptor Micro V2 - DustOff Flights #19 & #20 - It's Awesome! Plans are Available!

Get the GFS F-22 Raptor Micro V2 Plans & Docs Here:

Here is a link to the Video:

Here is a link to the Playlist:

Banggood GCRC

Here are links to the components:

Racerstar Racing Edition 1407 BR1407 3500KV 2-3S Brushless Motor (Primary)

EMAX ECO Micro Series 1407 2~4S 4100KV Brushless Motor (Alternate - Not Tested)

Turnigy Plush-32 12A (2~4S) Speed Controller w/BEC (Primary)

Turnigy Plush-32 Series ESC Programming Card

Htirc Hornet Series 12A 2-4S Brushless ESC With 5V/2A BEC (Alternat - Bench Tested)

Hobbywing FlyFun 12A Brushless ESC (Alternate - Not Tested )

GemFan Bull Nose 3545 GRP/Nylon Propellers CW/CCW Set Green (2 pairs) (Primary)

GNB 7.4V 550mAh 2S 80/160C Lipo Battery JST Plug (2S Primary) Reading
Posted by hugo secondname | Yesterday @ 06:02 AM | 3,753 Views
Hello, I have a little problem:

I have acquired a cnc mill and would like to cut out an airplane kit for a DeHavilland Beaver. The plans are in a pdf format.
My cnc software is CNCjs and only takes g-code files. I've taken the pdf and cut out the part with all the parts on it, that need cutting out.
My problem:
I need to turn this pdf file into a g-code file. This has proved quite difficult for me, due to the fact, that the converted g-code file doesn't show the parts, but only seemingly random rectangles, triangles and other shapes.

If you need any extra information, feel free to ask.

hugo s.
Posted by robertsmith007 | Yesterday @ 03:44 AM | 3,312 Views
Audio transcription is the process of converting speech in an audio file into written text.

In simplest form, it is the transformation of verbal communication and audio materials into text format. Interviewers, court reporters, professional secretaries and web design specialists create audio transcripts as part of their everyday job responsibilities.

For many businesses across the globe, audio transcription is an essential part of the daily grind. There has been a huge shift in content from written to audio and video, meaning there’s reams of data to be typed up by an audio transcription service.

The Benefits of Using Transcription
No matter what your goals are, audio transcribers can help you. Individuals find the affordable pricing, unbeatable accuracy and fast turnaround time to be a tremendous benefit of using transcription services. Many people will send their interviews, research notes and more before they go to bed and wake up to a fully-transcribed document in their inbox.

Best and easy way to distribute information
While you can share information in the audio format, it is difficult to access and use such files, as and when you need them. This is not the case with audio transcriptions. With an audio transcript in hand, you can read them in PDF or .doc formats and even print them out. The versatility of audio transcripts make it easy to use and share on an anytime, anywhere basis.

Get More Video viewers
As video blogging is growing, as well as...Continue Reading
Posted by Jack Crossfire | Yesterday @ 02:46 AM | 3,832 Views
A batch of heroic soldering, a reversed buck converter, & the motors came to life. Mounting those right angle hall effect sensors took some doing. Mounting the motors was another buster. Things aren't as modular as hoped.

A few dozen more farsteners would go a long way. Given how many farsteners were in the standard model copter, the lion kingdom might have over emphasized efficiency of farsteners. The wires aren't very vibration proof either. It could stand to use another plate with wire traps .

After voltage testing, a few strange sounds, the wheels lunged forward. It was still running firmware for calibrating the motors & it showed the drivers were installed correctly.
Posted by FeiJi | Yesterday @ 02:01 AM | 3,793 Views
Using 8mm EPP foam, fishing pole sections and hotglue to make a fuselage. No templates, just eyeballing it. Wonder what it will be?
Posted by GBLynden | Yesterday @ 12:06 AM | 3,883 Views
This is Roy's HobbyKing H-King A-1 Skyraider PNF RC Warbird Flight. During the video, you can see other RC Airplanes in the background like the E-flite Viper & E-flite F-15 EDF Jets.

Roy's HobbyKing H-King A-1 Skyraider PNF RC Warbird Flight (7 min 10 sec)

Posted by g monkey | Jan 13, 2021 @ 06:41 PM | 4,238 Views
Looking for a cool lockdown/winter project? Do this!

This is assembling an open source based FBL controller and installing it into an OMP M2.
Why do it? Well, you end up with a fully configurable and innovative flight controller with top notch flight performance and some very useful telemetry features.
Like what? Like motor current telemetry, so you can monitor the actual battery power used. Also, you have access to all of the FC parameters so you can configure it directly from the transmitter.

If I can do this, anyone can. I got into r/c helis nine months ago during the first lockdown, starting with a Nano S2 and a DX6. I then moved on to an OMP M2, and when I started on this project I knew nothing about FBLs, ESCs, OpenTx, etc.
Was it a lot to learn? Yes, but if you have the time to read, why not?

What I have tried to do here is highlight the internet sources which I found to be very useful and add a few tips based on my experience.

The thread that started it all, by eqtrian, introduces the project and documents its progress (page 1 and the bottom of page 18 are perhaps the most important):

P.I. Engineer has put together a handy zip package that is available/pinned on the Heliflight 3D discord channel, then under the opm-m2 section.

His package contains the following files:
- compiled firmware for the FC board (Heliflight 4.1)
- a dump of the commands for configuring the...Continue Reading
Posted by DE1188 | Jan 13, 2021 @ 05:48 PM | 4,107 Views
Looking for Axial Wraith replacement steering couplers and knuckles in aluminum. Preferably red anodized. Where can I find them?
Posted by JohnVH | Jan 13, 2021 @ 02:52 PM | 4,437 Views
Check out the Maiden of the AR Wing PRO! Such a great flyer!!
I also did a detailed unboxing/build video! Check the links in the description
Cant wait to get some more FPV time on this one, its a powerhouse!
Get one here:
MAIDEN FLIGHT Sonicmodell AR Wing Pro 1000mm Wingspan FPV Flying Wing (7 min 53 sec)

UNBOXING & BUILD Sonicmodell AR Wing Pro 1000mm Wingspan FPV Flying Wing (21 min 49 sec)
...Continue Reading
Posted by DutchRC | Jan 13, 2021 @ 12:03 PM | 4,467 Views
Halloa people

it is time for a new build project over here in Dutch-land, and with that 2021's first buiid
I'm not really sure what the interest-level in this one would be (?) It is a cinematic build but
the chosen frame is a bit "out there" :P

The frame: Ethix Cinerat 3-inch video-quad-frame

In this first part I'll show you the frame itself

Ethix Cinerat - 3 INCH Video Production Quad - FRAME REVIEW (18 min 41 sec)

type: Cinematic / Video production drone
wheelbase: 153 mm
Left-to-Right: 123 mm
Front-to-Back: 90 mm
base thickness: 5 mm arms (!)
weight: 144 gram (with printed optional parts)
material(s): Carbon fiber + allu standoffs + TPU prints
chamfered edges: nope
clean: 95% clean
20x20 mount: Yes 2 spots
30.5x30.5 mount: Yes 1 spot
motor mounts: 9 x 9 mm + 12 x 12 mm
Action-cam mount: 3 seperate ones!
battery strap: Nope
battery anti-skid pad: Yes