Bella Liu's blog View Details
Archive for June, 2019
Posted by Bella Liu | Jun 28, 2019 @ 02:05 AM | 6,088 Views
If you are trying to find all in one with 300W 15A Battery Charger, Cell Checker, Servo Tester, Receiver Tester&DC, here it is !!!

Features
Battery Charger
Cell Checker
Servo Tester
PWM,PPM.SBUS Input/output Receiver & Flight control tester
Viable AMp/volt DC Power supply (Required external DC input)
* be prepared to update the charger as needed to always have the newest features

Specifications

General
Charge, discharge and balance management support LiPo, LiHV, LiFe 1-8S,NiMh 1-20S,PB 1-12S battery.
Charger current:MAX 15A @ 300W
Discharge current:reccycle mode 15A @ 300W Normal: 3A @ 20W
Balance current: 400mA @ 2-8S
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
ESC power meter, together with output voltage and throttle signal
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 5-30V constant voltage, 1-15A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB [email protected] Output,for Mobile devices
Udisk firmware upgrade (Slave device)

Charger
Input voltage: 7.0-30.0V @MAX 16A
Type of battery: LiPo/LiHV/LiFe @1-8S, NiMh @1-20S, Pb @1-10S
Balance current: 400mA @2-8S
Charge power: 300W @MAX 15A
Discharge power: 300W @MAX 15A Recycle mode, 12W @ 3A Normal
USB: 2.1A @5.0V or Upgrade
Dimensions: 98x68x35mm
Weight: 142g
LCD: 2.2" 132x64 Pixel,Black and White

Measurement
PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-8S
IR: 10-500mR @1-8S
ESC: 300W @Max 15A

Output
PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power: 1.0-30.0V @1.0-15A Mode:CC+CV
OverCurrent Cut Off time: 50ms


You can find it here:

Web: www.dtn-tech.com
Email:[email protected]
Tel: +86-15818289223
Datton Electronic Tech. Co.,Ltd
Posted by Bella Liu | Jun 27, 2019 @ 10:43 PM | 4,844 Views
This is an easy to use prop wrench that fits right in your pocket! One side is M8, another side is M10. And the weight is only 7g for this small CNC part.

Specification:
Material: Alumium alloy
Color: Black
For 4mm/5.5mm/8mm/10mm bullet cap
Weight: 8g

Package Included:
1 XQuick-release Wrench Tool



Web: www.dtn-tech.com
Email:[email protected]
Tel: +86-15818289223
Datton Electronic Tech. Co.,Ltd
Posted by Bella Liu | Jun 24, 2019 @ 10:49 AM | 5,469 Views
Specification:

Total Length: 120mm
Diameter of handle: 20mm
Color: Blue/Purple/Black+Golden

Feature:

Ultra light weight sure-grip handle design.
Used for disassemble Hex Screw in RC Models Car Boat Airplane.

Package Included:

1 X 8.0mm M5 Nut Driver



Web: www.dtn-tech.com
Email: [email protected]
Tel: +86-15818289223
Datton Electronic Tech. Co.,Ltd
Posted by Bella Liu | Jun 24, 2019 @ 10:06 AM | 5,357 Views

This is a perfect combo Micro FPV RC Drone With 5.8G 800TVL 40CH Camera 3 Inch Goggles.

Goggle Key Features:
● Small size and light weight;
● Low power consumption, Working current 360~400mA;
● Double antenna reception to make the signal more stable;
● RaceBand 40 channel, Auto-Searching;
● 3.0 Inch 480*320 dot high brightness LCD screen;
● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
● Universal USB charging interface;
● Real-time video return, Very low time-delay;
● Bilingual menu in support of Chinese and English;
● Support external video signal input;
● Support AV signal output (Connect external DVR)
Goggle Specifications:
Name: Mini FPV Goggles
LCD Screen : Screen Size: 3.0 Inch
Resolution: 480*320
Display Ratio: 16:9
View Angle: 6 o'clock
Brightness: 350cd/mē with high brightness backlight LED
Video delay: Video time-delay less than 20ms
Lens: 4X Fresnel Lens, 92% transparent rate no distort of light
Interface: Antenna: 2 X RP-SMA male
USB: To charge the battery
AV Jack: External video signals input or internals AV signal output
Languages: English and Chinese
Power Supply: Power adapter: DC5V/1A (USB interface)
Battery: 3.7V/1200mAh, each full charge revive around 2.5hr working time
Power...Continue Reading
Posted by Bella Liu | Jun 03, 2019 @ 02:35 AM | 989 Views
Here is the details!

Specifications:
Input voltage: 7~27V(2~6S LiPo)
40 standard channels, A/B/E/F/R Band
Output Power: 25, 200, 500mW switchable
BEC Output: 5V/1A for Camera or FC
Traditional button+LED control of frequency and power
BFCMS (BFOSD & LUA Script) control via FC UART _TX
Firmware upgradeable

Power Consumption: 3.1W Max. @ 500mW
Video Input Impedance: 75 Ohm
Audio Subcarrier Frequency: 6.5 MHz
RF Connector: U.FL (IPEX)
Video Format: NTSC/PAL
Weight: 6g (Tx only, w/o SMA cable)
Size: 36*22*6.5mm w/30.5mm mounting

Package included:
1x 5.8G Video transmitter (MMCX)
1x PVC Heat-shrink tube
1x MMCX to SMA Female, RG178 cable 9cm
Posted by Bella Liu | Jun 03, 2019 @ 02:22 AM | 924 Views


Description:
Item Name: Lipo battery charging board
Item NO.: TP4056
Charging Method: linear charge
Charging Current: 1A Adjustable
Charge Accuracy: 1.5%
Input Voltage: 4.5V-5.5V
Full Charge Voltage: 4.2V
Charging Indicator: Blue light lit charge,red light lit full charge
Charging Input Interface: Mini USB
Working Temperature: -10 Degree to +85 Degree
Reverse: NO
Weight: 1.8g
External Dimensions: 25 * 19 * 10mm
Usage: Used for single lipo or multi-section lipo parallel charging,can take power from the USB port.






Web: www.dtn-tech.com
Email: [email protected]
Tel: +86-15818289223
Datton Electronic Tech. Co.,Ltd