Mad_angler1's blog View Details
Archive for October, 2016
Posted by Mad_angler1 | Oct 26, 2016 @ 03:19 PM | 7,976 Views
As the first orders are landing with folks I have put together the some tips for people for when you receive you new craft , upon receiving your Mavic you want to do number of things before you fly to ensure you get the best experience.

The Mavic is now shipping and available from DJI Pre Order the Mavic Pro Now
Note this is a affiliate link-see bottom of page for more info




Important Note: Before turning on the aircraft always make sure you have removed the gimbal clamp and it's free to move around unobstructed.

1: Firmware and App

Download the latest version of DJI Go to your smart device, you need DJI Go V3.0 onwards to support the Mavic.

The Mavic will be shipped with firmware already installed but this may not be the latest, Its highly recomended that you update your craft before you fly, read the DJI update release notes and understand what the update should do and how to perform it before starting.

The Mavic firmware update is performed via the Go App or DJI Assistant 2 on PC or Mac, the Go App is done wirelessly and you will update both the craft and Remote controller this way, DJI have produced a video showing this process and I have link it on my blog page for the Mavic here

https://www.rcgroups.com/forums/show....php?t=2748810

If you have additional batteries you may need to update these as well before you fly, to do this just turn the craft on with each battery in and it will go through the update process again for that battery...Continue Reading
Posted by Mad_angler1 | Oct 16, 2016 @ 04:33 AM | 6,523 Views


DJI Have finally released their new multipack charger, the DJI Hex Charger is designed for use with dedicated Intelligent Flight Batteries and Remote Controllers. It can charge up to six Intelligent Flight Batteries and two Remote Controllers simultaneously.

This can be purchased from the DJI Store for 289/$299 below

Order Now DJI Store

See bottom of page regarding these links for more info




Specifications
Model: MC6S600
Compatible Battery:
Inspire 1 Series Intelligent Flight Battery (TB47/TB48)
Matrice 100 Intelligent Flight Battery (TB47D/TB48D)
Matrice 600 Intelligent Flight Battery (TB47S/TB48S)
Compatible Remote Controller:
Inspire 1 Series Remote Controller
Matrice 100 Remote Controller
Matrice 600 Remote Controller
Lightbridge 2 Remote Controller
Phantom 4 Remote Controller
Phantom 3 Professional/Advanced/4K Remote Controller
Operating Temperature: 32 to 104 F (0 to 40 C)
DC Output: 26.1 V; 0 to 3.83 A (Battery Port); 0 to 2 A (Remote Controller Port)
Weight: 2140 g

Looking at the spec it charges at 3.83A so i would say a TB47 would charge in about 1h45m and around 1h20 for a TB47, there is no info on if it has storage charge or other features as of yet.

DJI have also released a nice carry case that will hold 2 x Hex chargers allowing you to charge up to 12 packs at once.

...Continue Reading
Posted by Mad_angler1 | Oct 03, 2016 @ 08:06 AM | 5,585 Views
Just a video talking specifically about some of the Mavic Pro going over some common questions

DJI Mavic Pro - The Little Things You Need To Know FPV & Other (20 min 33 sec)


The Mavic is available from DJI for Pre order now
Pre Order the Mavic Pro Now


Note external links on this page contains affiliate link and i may receive a small commission from any purchases made through it, you can choose to avoid them by just navigating to the DJI Store manually.