...

If anyone has articles or any other info on the building of indoor props Please feel free to leave a link. I've consumed a lot of info so far, But you never know if you missed anything.

...

Found these on VP-Racing when ordering 1/8 scale buggy parts. These are excellent little servos for a couple new foaming I'm building.

The first thing I noticed with the new Hitec servo is that the stop blocks are offset. You can program the servo for normal aileron travel, But still have plenty of travel for flaps. Pretty cool little servo. going right into a CX-5.

It was a complete write off. But now...She back together. Addiction X
The previous owner will be shocked. Now what color.

I made die holders for 12mm, 16mm and 20mm diameter left handed dies. M2, M2.5, M3 and M4 what do you think there for.

Bud Nosen Models Champion Citabria
Found my glider tug, Going to be a fun ride down after the release.

I can imagine the guy that covered this thing wore plaid socks too, Cream and brown really. Every Hobbie I've seen fly, Flies like a manhole cover. As you can see I have three projects ahead of this, Two Evolution Evo's and a Sonoran Art 1.5. It will be an ultimate test to my building skills.

The radio I hate that will never go away.

Can't wait to try new quad batteries out, The balance from the package looks good.

Stole the ideal from Quique's Flex Innovations Mamba. 600Kv quad motor from Banggood. For 20 bucks don't let the price fool you these motors are very powerful and efficient. 12X4 Falcon woodie on 6s 1000 mAh 20 amps with 500 watts. Makes for a very smooth and linear throtle and plenty of power to pull out of hovers and flat spins. Thank you Ken from Motofly that turned me on to these motors.

Packing a Xing 2806.5 1300 Kv motor into my Eclipson Prandtl.

I've been wasting my time with a 3=D printed wing lately. Nothing against the designer, Just not my cup of tea.
Than I go to the local hobby shop and low'n behold an Airtronics Jetfire .40 kit...Score...
And NX radios are in stock...Bummer there goes five bones.

That's full tilt counter rotation wall art. Planes to follow.

None of my crazy projects could even be imagined without Cenco Grinding in Allentown Pa. Once again, Thanks guys. Ordered these little beauties from Banggood, The manufacturer claims they can be used for quads. I'd like to see a 150 sized quad with eight motors. I have different plans though, A 3mm 3 and half inch long drill blank for a new motor shaft. This is to get the tractor prop away from the pusher prop. I've learned alot from the mini stick. This system will going into a West Michigan Liberty Bibe. Should be a fun 3-D plane.

Bought 1.5 mm JST connectors from Digi-Key for a Spektrum 6310 receivers. My problem isn't cripping the socket to the wire, It's inserting the socket into the housing. Seems as though I keep smashing the socket when I try to push it into the housing.

My question is can someone please offer some advise to me.

Thanks Doug

E-Flight Mini Ultra Stick with 750 watts of counter rotation power.

Yeah...You don't want to move here, There's no flying sites.

Alpha 2m F5J build, Installing a Subsonic 2210 10X4 folding prop with 200 watts 3s.