Posted by Thomas B. | Today @ 04:09 PM | 83 Views
My friend Lutz brought this nice Keil Kraft Gipsy to our meeting.
Gummimotor Freiflugmodell Gipsy von Keil Kraft (0 min 38 sec)

Posted by DutchRC | Today @ 10:50 AM | 227 Views
Halloa guys..

a simply product tip today.. IF you are looking for your next (or first :P) micro FPV quad.. I think the ET-series by LDARC / KingKong is a very good option.. I've had one for quite a while, and they recently released V2's of that lineup..
It's available as an ET100, ET115 and ET125.. Sooooo which is THE one to get from those???

LDARC V2 ET-Series V2 Micro-FPV-Quads - Which Do YOU want?? (I'll tell you :P) (10 min 5 sec)

Posted by PittSpecial | Today @ 10:43 AM | 249 Views
How about a Hangar9 Christian Eagle 90-size! How much? FREE! Just gas to pick it up 128 miles away! The gentleman was going to throw it away in the dumpster!

Yes, it will be an Electronic RC flying model after I am done with it!
Posted by GroundControlRC | Today @ 09:20 AM | 285 Views
Field Test Flight #1 - RacerStar RS30A 30A Lite OPTO ESC



Here is a link to the Video:
https://www.youtube.com/watch?v=D61J6AXGIxY

These are fairly inexpensive 30A ESCs and the RacerStar Motors I have are great, so why not try some of their ESCs.
I have converted this ESC to a Non-OPTO ESC by installing a Micro SBEC (Switching Voltage Regulator) on this ESC.
This is the first Test Flight for both of these components.
I have already performed an initial review of this SBEC.
We are testing these components in our "Glue & Fly Series" F-22 Mini V2.

Here is a link to this ESC:

Racerstar RS30A Lite 30A Blheli_S BB1 2-4S Brushless ESC
https://www.banggood.com/Racerstar-R...47791920140372

Here is a link to this Micro SBEC:

HobbyKing Micro SBEC 5V/3A
https://hobbyking.com/en_us/micro-be...asc=3304856911

Build, Fly, Crash, Repair, Rinse & Repeat!

Happy Flying!


See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by Amanda BH | Today @ 07:48 AM | 309 Views
Thanks for all Brotherhobby customers support.

Thanksgiving and to the classic, so we made some item at discount price
Returner 2306R5 ( Deadpool and Red Hulk ), Returner 2207 R5, Speed Shield 2207.5 and Venom 2206

More details, you can send email to me ( amanda@brotherhobby.cn )
Posted by Tazkiller85 | Today @ 06:33 AM | 356 Views
Yep Les Amis,
Ouf ! Mais pas déséquilibré !!! Je vous présente aujourd'hui un chargeur que j'ai en test depuis plusieurs jours, voici donc le D6 DUO PRO de chez Hobbymate. Pour ceux qui cherchent un chargeur balance complet et performants, c'est l'outil idéal . Une alimentation AC et DC, deux emplacements de charge pour batterie de toute sorte, un chargeur sans fil pour smartphone, une sortie USB, un gros ventilo et une entrée mini USB pour les MAJ ... Donc, WATT ELSE ? LOL ... Que demander de plus ? SI peut être qu'on aurait aimé avoir quelques câbles avec, en plus du câble d'alimentation. A part ça, rien à dire de mauvais sur cet appareil qui fonctionne à merveille et j'estime qu'il vaut son prix si on le compare à l'ISDT D2 . En bref, un incontournable pour ceux dont le budget le permet .

D6 DUO PRO Hobbymate - Chargeur lipo Duo Polyvalent - Watt Else ! (29 min 7 sec)



NOTATAZ : 19/20 Il vaut son prix !

Les + : Double Lipo, Charge smartphone wireless, Double alimentation, précis et complet .
Les - : Pas de cables lipo ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

CODE COUPON DE 20% pour le chargeur (106€ après remise) ! --------------------------- Tazkiller20off -------------------------------------
- D6 DUO PRO : https://goo.gl/Ye7CEr
Autres produits Hobbycool déjà présentés :
- Comet 5" : https://goo.gl/qAwVwz
Produits à venir Hobbycool :
- METEOR 5&...Continue Reading
Posted by alex111 | Yesterday @ 11:15 PM | 497 Views
One of my favourite RC tug boat it's huge!!!!!
Posted by DismayingObservation | Yesterday @ 07:10 PM | 570 Views
...and revisit a damaged model at a later date. Works every time.

After doing precisely that regarding the damaged little Harbor Freight P-51, the damage isn't all that bad. The canopy suffered a couple of wrinkles and the underside of the cowl area is little more than a "scraped chin," easily repaired. I thought for sure that I had destroyed the model. It hit asphalt, but I might have been able to pull back the elevator far enough to avoid little bits of EPO scattered all over.

Instead, I do believe I can fix it.

First things first and that will be the removal of the wing spar and restoring the dihedral. Once I attach a new prop and collet, I'll try again.

I was going to take it apart last night and now I'm glad I didn't.

As for the crash damaged homebuilt "Sparrow," I'm told that I should have it back by Saturday, repaired and with additional rudder area. I also have a bit more info on the glider in the photo below.

It was built by a gentleman named Arlo Larson, an engineer whose most recent work includes the development of both fiberglass and carbon fiber blades for wind turbines. My friend Buzz who gave it to me never flew it; he saw it cleaned up and flown for the first time this past Saturday. I solved the sticky folding prop blade problem easily enough by hogging out the mounting holes with a hobby knife.

I also have two gliders by Mr. Larson, one of which is an incomplete "Bird of Time." I can say with confidence that Mr. Larson is a top notch builder! A canopy for that multicolored model is being whittled out by Buzz.
Posted by mystifried | Yesterday @ 03:44 PM | 658 Views
I am currently assembling a Reichard kakadu, that I have had for a while. I am not an experienced builder , I have built a couple of planes from plans, and a number of RTFs . I am however struggling a bit with the elevator assembly on my kakadu.

I cannot seem to get the elevator bowden cable to align well enough with the control horn I want to put on the elevator. The angle seems all wrong. I have put the cable inside a sleeve to reduce latency, and I wonder if this may be the problem.

Any suggestions would be gratefully received.

Cheers
Richafrd
Posted by clifford11 | Yesterday @ 02:21 PM | 690 Views
wing
Posted by DutchRC | Yesterday @ 10:55 AM | 786 Views
Halloa guys & girls

in case you follow my YT channel, you probably know I like the GepRC brand.. I've had quite a nr. of quads / frames from that company.. So far they have all had a smart design and the materials used were of good quality (probably an understatement)..
And today.. I came across a new 3 inch quad that comes with a Runcam Split 1080P recorder Stock :|
Not only that.. the frame has a really smart design IMHO.. It has more room-to-spare in it then most 5 inch quads have

Link to this new quad: GepRC CX Cygnet 145 BNF or PNF

Some pictures then...





...Continue Reading
Posted by KiwiBoater | Yesterday @ 09:19 AM | 825 Views
My Custom SR48 so far
Posted by marwan.irman | Yesterday @ 06:26 AM | 905 Views
here is 2 videos shows how my skills developed since i start to fly RC Airplane
now it's one Year

First build in Novamber 2017 ( The crash of Zebra airline )

The crash of Zebra airline :D (13 min 32 sec)



this is my last build was September 2018 and i made my accident . hopefully i can back to fly again 2019

Wombat XL Madien flight & My accident (11 min 45 sec)
...Continue Reading
Posted by marwan.irman | Yesterday @ 06:19 AM | 915 Views
My XL Wombat . when a Madien Flight goes wrong
Wombat XL Madien flight & My accident (11 min 45 sec)



Subscribe and download the plan
https://www.dropbox.com/s/6jfpi9bo8t...%20XL.pdf?dl=0
Posted by marwan.irman | Yesterday @ 06:16 AM | 912 Views
My XL Wombat
Wombat XL scratch building ( Part 2 ) (7 min 27 sec)



Subscribe and download the plan
https://www.dropbox.com/s/6jfpi9bo8t...%20XL.pdf?dl=0
Posted by marwan.irman | Yesterday @ 06:14 AM | 914 Views
My Wombat XL

Wombat XL scratch building ( Part 1 ) (7 min 33 sec)


Subscribe and download the plans
https://www.dropbox.com/s/6jfpi9bo8t...%20XL.pdf?dl=0
Posted by marwan.irman | Yesterday @ 06:11 AM | 918 Views
Repairing lipo battery 4S and modified 4S to 3S Tattu


Repairing lipo battery 4S and 4S to 3S Tattu (5 min 18 sec)