-
Views: 276
Mounting the unit, the circuit board, and the bulb holders to a scrap pieces of wood will keep the wires from getting broken when the 3 in 1 is moved around in the shop. -
Views: 238
The unit is mounted to the board with some double stick tape. The half inch thick strips between the board and the unit allow for air circulation on the back of the unit, which gets warm during discharging. -
Views: 241
The circuit board is double stick taped to the board. I screwed the bulb holders to the vertical board to isolate them from the other components since the bulbs get very hot. -
Views: 323
You can see that the wires connecting the unit to the circuit board. They've already been repaired once. I've glued the wires at both ends and in the middle to keep them from moving around.
Comments (12)
Add Comment
-
Views: 371
Here's my fleet in the hanger. The PVC pipe racks really keep the planes from getting damaged. Yes, there are two Skyraiders. You are not seeing double. -
Views: 306
My trusty Super Cub and Parkzone T-28 and the new Parkzone P-47. I've added flaperons to the cub and flaps to the T-28. The jug still needs retracts and the servo wires need to be taped down but all else is ready.. -
Views: 310
My Parkzone Wildcat and Durafly T-28 and Skyraider. The Skyraider was my first Hobby King purchased. I crashed it really bad on the first and second flights. I was able to make repairs and get it flying again.