Posted by Hobby Details | Sep 18, 2019 @ 09:14 PM | 948 Views
Premium 12 in 1 Magnetic & Lock Screwdriver Set

Hex1.5/2.0/2.5/3.0mm
Box4.0/5.5/7.0/8.0 mm
Phillips 4.0+/5.0+
Flat 4.0-/5.0-

Titanium Tips(6.35mm/1/4)

1set
Wholesale Price please PM or contact me at: [email protected]
Posted by DoubleEagle | Sep 18, 2019 @ 07:54 PM | 1,552 Views
Giant 1/7 Scale RC Land Rover Defender 110. Hobby grade, 2 speed, hardbody! (11 min 40 sec)


Great review by Tomley RC Garage
Posted by old4570 | Sep 18, 2019 @ 07:50 PM | 1,616 Views
no more

It's now a RC glider ..

https://www.banggood.com/100cm-Wings..._warehouse=USA

It's blowing a Northerly Gale at the moment ..

But early this morning I took it into the back yard for a quick and dirty CG check with a Zippy 350 .

It glided across the back yard like a dream and smacked the brick wall

I havent glued the motor , so no damage .

But looks very promising .

A-team Hannibal (0 min 15 sec)

Posted by JohnVH | Sep 18, 2019 @ 05:28 PM | 2,274 Views
Flight two on this twin EDF Fighter!
Freewing SU-35 FLIGHT TWO Twin 70mm EDF Thrust Vectoring Jet (5 min 48 sec)

Posted by QuadifyRC.com | Sep 18, 2019 @ 05:06 PM | 2,346 Views
I've recently completed my review of the happymodel larva-x and have also covered off
  • Setup
  • Custom PID tune
  • Custom filters
  • Durability tests
  • Comparison of onboard DVR to goggle DVR

It's a great little quad but there are some durability question marks around the motors in particular and as you can see in my review, Happymodel are already working on a response. That aside it's a great value, fast, nimble and very quiet ultra light micro 'toothphick' that is well suited to park flying and other environments.

Full review is here:

https://www.quadifyrc.com/reviews/happymodel-larva-x-review-setup-pids



.

Posted by aopen3434 | Sep 18, 2019 @ 10:55 AM | 2,250 Views
X8-RDM ENCODER BRUSHLESS GEARED SERVO MOTOR






X8 - RDM encoder Brushless geared SERVO Motor 32bit control power unit
This is NEW Driver board for BGC motor RMD-S and RMD-L, ONLY Difference is installed a different driver board with RS-485 industrial communication used for robot and other Automation. This motor is best for servo gimbals, turntables, robots. The motor have the same size and fixed holes, RMD-S and RMD-L servo motors are compatible with or BGC driver board.
RMD-S and RMD-L are based on RS-485 industrial communication ,the advantage is anti-jamming ability. (suitable for long distance transmission)and also the motor speed higher used for robot and

...Continue Reading
Posted by Master splinter | Sep 18, 2019 @ 04:15 AM | 2,076 Views
Im looking to purchase the VQ Beechcraft Baron 69″ Wingspan EP/GP Civilian version pm me if you have one to sell
Posted by rc38joe | Sep 18, 2019 @ 02:49 AM | 2,088 Views
Hiya Fellow Flyers:

The Annual Omahawks R/C Auction date has been set and the Hall is reserved for our next auction on Oct 13, 2019..

The Omahawks R/C Club is hosting a R/C Auction in Omaha (See attachment) @ Hobby Town Hobby Plex located at 10200 Scott Circle, Omaha, NE 68122 on Sunday October 13th, 2019.

Doors open at 7:00 AM CST, Auction starts promptly at 10:00 AM.

Information will be posted @ Clubs web site at: http://omahawks.org/ , check right navigational column.

Question contact Kevin Hyde at 402-670-8320

Food and Refreshments offer for sale, Admission is $5 kids under 14 are free.
Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,984 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:24 AM | 1,925 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:17 AM | 1,931 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by Jumper factory | Sep 17, 2019 @ 10:08 PM | 2,071 Views
T16 can control the helicopter
Posted by Hobby Details | Sep 17, 2019 @ 09:36 PM | 1,912 Views
Premium Allen Wrench Set - Black Gold 4pcs Big Handle
DTT02022A Hex1.5 x 182mm
DTT02022B Hex2.0 x 182mm
DTT02022C Hex2.5 x 182mm
DTT02022D Hex3.0 x 182mm
Titanium Tips
4pcs/set
Dia 20mm Handle, bigger than usual dia 18mm handle
Optional to change to with SAE(Inch) Hex or Ball Head Tips, same price
Wholesale Price please PM or contact me at: [email protected]
Posted by old4570 | Sep 17, 2019 @ 09:30 PM | 2,428 Views
https://www.banggood.com/custlink/DmvDLuaEWD = HappyModel 0802

Just came in the post .. Like 60 minutes ago .

1-2s , And it is sooo cute !

The 1103 pictured with it does not run , I have ordered another 1103 ( hope it gets here soon ) , the 0802 got here rather quickly ( Thanks BG ) .
I just got a 1s capable ESC so am looking forward to some testing ..
Just need some AAA carriers so I can mod my tachometer from button cell to 2xAAA .. ( Especially since I already butchered the Tach )

Wonder if this little motor will push the 450x micro wing ?
Some interesting tests to look forward too .. ( yes )

Super tiny only 1.9g
Double E-clip design, prevent Motor bell to flying off

Brand name: Happymodel
Item name: SE0802 1-2S brushless motor
KV: 16000KV, 19000KV 22000KV (option)
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Terminals: JST1.25mm
No.of Cells(Lipo): 1-2S
Wire length(include connector): 40mm
Posted by Jack Crossfire | Sep 17, 2019 @ 07:14 PM | 3,219 Views
Quite a shock when the fixture of Gootube recommendations for the last year, the one of a kind PZL-104 modified with a turbine & extra large landing gear was destroyed. He took off in a strong crosswind & got blown over. This is why there are maximum windspeeds for aircraft.



He provided 10 minutes of video of him beating himself up but showed very little of the wreck. His passengers miraculously survived without any injury. It must have been a very forgiving airplane for him to be so lethargic about the weather.


In another time, it probably could have been rebuilt with parts from another PZL-104 & another engine. He probably doesn't have enough money to do the job. He seemed to document at least some of the build process, so that's more than the Smithsonian had for rebuilding the Wright flier.
Posted by Thunder50BMG | Sep 17, 2019 @ 03:26 PM | 2,698 Views
BLACKTHUNDER QUAD

Just another fun project and I have been planning this configuration for a while. Not much to say for this is really a simple and easy build and you guys can build this with your eyes close.

This is just my version and it's really interesting and fun project and pretty powerful with 4S.



Close-up PIX:



MAIDEN :

BLACKTHUNDER QUAD * MAIDEN (6 min 16 sec)
...Continue Reading
Posted by rclad | Sep 17, 2019 @ 01:52 PM | 2,938 Views
The North Central Regional IMAC Championship this past weekend was the last contest of the year and had one of the tightest races I have ever seen. I felt like the little engine that could, competing against gas giants with my little electric plane. See pic below. More pics to come. Read more about the competition here.
Posted by Reckless_fpv | Sep 17, 2019 @ 11:34 AM | 2,133 Views
Posted by unboxingexp | Sep 17, 2019 @ 11:16 AM | 2,062 Views
Happymodel Larva X test (1 min 0 sec)


Crazy power in a small package!
- New Crazybee F4 PRO V3.0 AIO Flight controller
- Betaflight OSD support
- Camera Angle adjustable
- VTX power switchable 25mw~200mw
- Smartaudio ready , change VTX bands, powers, channels via OSD
- Receiver option: Frsky D8/ Flysky / DSMX / Frsky RXSR/ TBS CRSF
- Diamond VTX
- Compatible both for 2-3S Lipo/LIHV

https://www.banggood.com/custlink/G3mGO7HyTV
Posted by GroundControlRC | Sep 17, 2019 @ 09:26 AM | 2,206 Views


Here is a link to the Video:
https://www.youtube.com/watch?v=mEDvNKtbIWU

The Z84 is a pretty nice Wing with a decent power system.
This version is the PNF that has a 2208 2600kv Motor, 30A ESC, and 5050 Prop.
I've found a 6040 Prop works much better than the stock 5050 Prop as it produces more thrust and is more efficient.
Let's get it in the Air!

The KMP 6040 Composite Prop proved to provide a lot of thrust with good efficiency.
When I landed I still had 3.85v per cell ;-)
My new favorite Prop for this Wing.

The LIPO I used for this Flight was a ZOP 3S 1500mah 40C LIPO.

***Note: I replaced the T-plug on mine with an XT60 Plug on the ESC

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Zeta Wing Wing Z-84 Z84 EPO 845mm Wingspan Flying Wing PNP
https://www.banggood.com/Wing-Wing-Z...47791920140372

Props I use:

1pc KMP 6X3E High Efficiency Propeller
https://www.banggood.com/1pc-KMP-603...47791920140372

1pc KMP 6X4E High Efficiency Propeller
https://www.banggood.com/1Pcs-KMP-6X...47791920140372

A LIPO to use:

ZOP Power 3S 1500mAh 40C Lipo Battery XT60 Plug
https://usa.banggood.com/ZOP-Power-1...47791920140372

Gens Tattu 3S 1300mAh 45C Lipo Battery With XT60
https://www.banggood.com/Gens-Tattu-...47791920140372

Gaoneng GNB 3S 1300mAh 40C XT60 Plug Lipo Battery
https://www.banggood.com/Gaoneng-GNB...47791920140372

CNHL BLACK SERIES 2200mAh 3S 30C 11.1V Lipo Battery 24.42WH XT60 Plug
https://www.banggood.com/CNHL-BLACK-...47791920140372

Turnigy 2200mAh 3S 25C Lipo Pack
https://hobbyking.com/en_us/turnigy-...asc=3451564005


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189