kopterheld's blog View Details
Posted by kopterheld | Mar 20, 2020 @ 04:01 AM | 5,998 Views
Can now be ordered from Banggood

RadioMaster TX16S Hall Sensor Gimbals
107€ - $119 Coupon: pArts8 - https://www.banggood.com/custlink/vGvKMV73QP
The new transmitter that should be better than the Jumper T16 Pro with Hall Sensor Gimbals or even as a bundle with TBS CrossFire module


The TX16S transmitter from Radiomaster is basically the Jumper T16 Pro Hall with a few improvements. The Hall Sensor Sticks are made of aluminum, a USB-C connection with charging function and two serial interfaces are installed.
Manufacturer side - https://www.radiomasterrc.com/tx16s

RadioMaster TX16S Standard Version
...Continue Reading
Posted by kopterheld | Mar 11, 2020 @ 11:55 AM | 6,558 Views
The new BetaFPV Twig 3 inch toothpick Kwad is extremely fast and super light with 1404 3800KV 4S engines. With F4 FC, 12A ESC's, Caddx Ratel camera 25-200mW VTX. One of the best 3 inch kwads with 105g. Mega fun with the good Caddx Ratel camera even in the evening with little light.
Get the TWIG XL 3 inches
BetaFPV - http://bit.ly/BFTwigXL
FrSky - Amazon - https://amzn.to/2TvOKhO
CRSF - Amazon - https://amzn.to/38ropWw

And use the GiftCARD to save even 5% more Coupon: GiftCARD
http://bit.ly/BetaFPVgc
Get 5% Coupon for BetaFPV - http://bit.ly/KHBetaFPV

Video - BetaFPV Twig XL 3 inch Toothpick (EN subtitle)
BetaFPV Twig XL 3 Zoll Toothpick (4 min 55 sec)


Scope of delivery with the Twig XL 3 and two sets of Gemahn Propeller 3016


105 grams empty weight and with a 4S battery under 160 grams, a lightweight.

...Continue Reading
Posted by kopterheld | Mar 11, 2020 @ 08:38 AM | 6,623 Views

This is the Diatone GTB 339 Pro, which is identical to the newer Diatone GTB 339F1. The F1 only has the licensed FalcoX firmware which normally costs around $ 15 and the Gemfan 3016 3 blade propeller. Otherwise, both quadcopters are identical. The GTB 339 Pro Quad has a Runcam Nano 2 camera with the good TBS Pro32 Nano receiver that can send 25 to 400mW. Inside is the Mamba F411 AIO board with 13 Amper ESC’s. The original are 3020 2-sheet HQProps on the Mamba 1105 5500KV motors. The Mamba Cube Frame is thin, but very stiff and light.
It is flown with a 450mAh 3S battery.
This is the best and lightest 3 inch drone I've ever flown.

Video 1 - Diatone GTB 339F1 FalcoX Caddx Baby Ratel -
Diatone GTB 339F1 FalcoX Caddx Baby Ratel (9 min 9 sec)


I ordered FalcoX for $ 15 for my Mamba F411 stack (licensed).
https://shop.flightone.com/product/f...1-aio-license/
Before installing the FalcoX firmware, you should first set the direction of rotation of the motors under BlHeli Suite, because this is only possible with Betaflight FW on the FC.

Scope of delivery of the Diatone GTB 339 Pro.
Get Diatone GTB 339 PRO 3S at Banggood- https://www.banggood.com/custlink/GKvv6AFldF
with Coupon: aFfBg10

...Continue Reading
Posted by kopterheld | Mar 04, 2020 @ 02:46 AM | 7,893 Views
The HX115 is a super light 3 inch FPV racer with a Runcam Split 3 nano camera that records in HD. With the 1105 5000KV motors, 3 blade HQPros and a 450mah 3S or 4S battery, the drone flies perfectly with Betaflight 4.1.
Use the GiftCARD to save 5% on BetaFPV Coupon: GiftCARD
http://bit.ly/BetaFPVgc


HX115 HD Version - CAddx Baby Turtle
BetaFPV - http://bit.ly/HX115HD
Amazon - https://amzn.to/2JW7bHd


HX115 FPV Version
BetaFPV - http://bit.ly/HX115SD
Amazon - https://amzn.to/35a1rS7

Video 1 - BetaFPV HX115 HD 3 inch Toothpick
BetaFPV HX115 HD 3 inch Toothpick (4 min 25 sec)


Batteries:
...Continue Reading
Posted by kopterheld | Mar 02, 2020 @ 04:07 PM | 5,344 Views

Reptile CLOUD-149 is a 3 inch Mega CineWhoop. For less money you can get a solid quad for cinematic video filming with e.g. a GoPro camera.
Get the Reptile CLOUD-149 from [CZ] EU warehouse with the coupon: aFfBg10 - https://www.banggood.com/custlink/3Dvvl7sWcf
Coupon2: BGRE149

Video 1 - Reptile Cloud 149 CineWhoop good and less $130 (EN subtitles)
Reptile Cloud 149 CineWhoop gut und günstig (4 min 36 sec)


The PNP 3 inch CyneWhoop has 20A ESC's, F4 FC, 1407 4000KV motors, 25-500mW VTX video transmitter.


...Continue Reading
Posted by kopterheld | Feb 22, 2020 @ 04:50 PM | 2,225 Views
Get the Eachine EV300D FPV goggles
from [CZ] EU warehouse Coupon: BG333D - https://www.banggood.com/custlink/Dvmv6QZ4r0
Fast delivery from EU warehouse
The EV300D has new 4: 3 very good LCOS displays that can also be switched as 16: 9. The lenses are adjustable to diopter +3 to -8.
Two diversity receivers are installed with SMA connection. A rapidFiRE module can also be used on the left in the shaft. The picture in the goggles is really good, large (42 FOV) and even reduced noise. With the new firmware 2020-02-25, the latency has now been improved on all cameras from 100ms to 30ms. PAL and NTSC cameras get less that 30ms what is good.

EV300D new Firmware update (2020-02-25) PDF document ans download URL:
https://www.banggood.com/custlink/DGm3qEVkmM

Video 1 - Eachine EV300D FPV goggles and update the firmware (EN subtitle)
Eachine EV300D FPV Brille neue Firmware (5 min 25 sec)


Micro USB to USB 2.0 OTG Adapter
https://www.banggood.com/custlink/K3GK2KZ6LO
Adapter to connect USB memory to the EV300D.

Short Antennan for FPV goggles
Lumenier AXII 2 Right-Angle Stubby
- https://www.banggood.com/custlink/3DDDgBLA5A
Amazon - https://amzn.to/2RsDlwT
4x Foxeer Lollipop 3 Stubby
- https://www.banggood.com/custlink/KGGD2mBK4h
And 2x 90 degrees Adapter - https://www.banggood.com/custlink/Gvm3q3g30W


EV300D has two diversity modules which roughly correspond in quality to a True-D V4 module.


Alternatively, other modules can be used, such as the...Continue Reading
Posted by kopterheld | Feb 13, 2020 @ 08:55 AM | 2,467 Views

Here I show how to update the Multi Module URUAV TMX5 and TMX5-Lite and install the bootloader. Later you can update the module with the Taranis transmitter via OpenTX. The Multi Modules are perfect if you have the new Q X7 ACCESS or X9 Lite transmitter to control FrSky D8, Flysky, DSMX and other receivers.

Video Multi Module URUAV TMX5 Lite update with Bootloader (DE with EN subtitle)
Multiprotokoll Modul URUAV TMX5 Lite aktualisieren mit Bootloader (3 min 47 sec)


Multi-Module Firmware
https://downloads.multi-module.org

Flash Multi Program
https://github.com/benlye/flash-multi


URUAV TMX5 4 IN 1 Multi Module
https://www.banggood.com/custlink/K33D03gNJU
The TMX5 is the same as the iRangeX iRX4 Plus multiprotocol module. The module is suitable for the Taranis or Turnigy 9XR, Flysky TH9X, Futaba S-FHSS. With the IRX4 you can control almost all receivers like DSMX, FrSky, Flysky, Futaba, DEVO and all quadcopters fly whether like Eachine E010, E011, JJRC H36, Hubsan, Syma.


URUAV TMX5 Lite 4 IN 1 Multi Module
https://www.banggood.com/custlink/Gm3G6q6zDy
This is the multiprotocol module for Taranis X-Lite, X-Lite Pro, X9 Lite. Support almost all protocols like FrSky D8, D16, DSMX, Flysky, BAYANG and much more.
...Continue Reading
Posted by kopterheld | Feb 11, 2020 @ 06:55 AM | 2,688 Views

Meteor65 flies longer and smoother with the RPM filter thanks to the free bidirectional JazzMac firmware for ESC's with 48k O-H-5 16.79 or the L-ESC's boards O-L-5 16.78f 48k
Without RPM filter with 22000KV motors approx. 2:35 minutes with the standard BLHeli 24k firmware
With RPM filter and 16.79 48k JazzMac firmware with 22000KV motors about 3:15 minutes.

Super light under 23g with the new BT2.0 connector instead of the old PH2.0. The new BT2.0 connector can conduct more current. A light F4 1S FC and 0802 19500KV or 22000KV motors with a CMOS camera and 25mW video transmitter are installed.


...Continue Reading
Posted by kopterheld | Feb 06, 2020 @ 04:10 PM | 6,851 Views

This is the Eachine LAL5 with the 4k Caddx Tarsier V2 camera.
Overall, the Eachine LAL5 flies very stable and well, has a great FPV video footage and you can have everything recorded in HD or even 4K. The motors are heavy but very good, the ESC's with 50 amperes have enough power. So if you are looking for a quadcopter with HD recording and maybe later want to convert to a 6 or 7 inch quad, this is a very good basis.

2507 1850KV 6S Motor mit 42 Gramm

Myvideo review (DE) and EN subtitles
Eachine LAL5 6S Freestyle - 4K Caddx Tarsier V2 camera
Eachine LAL5 6S Freestyle 4K Caddx Tarsier V2 Kamera (4 min 10 sec)


Eachine LAL5 - Caddx Tarsier 4K V2 Cam 6S Version
Banggood 6S Version from [UK] EU warehouse Coupon: aFfBg10 - https://www.banggood.com/custlink/DvD34HnHDJ
or [CN] Coupon: BGZBLAL5
Eachine LAL5 is a 5 inch freestyle with F4 FC and the CaddX Tarsier V2 4K camera optimized for 6S Lipo. 50A ESC's with large 2507 1850KV motors are on.
So only good components and despite the heavy motors, the LAL5 flies very well.
...Continue Reading
Posted by kopterheld | Feb 03, 2020 @ 09:35 AM | 4,022 Views

This is the Mobula 6 1S brushless Tiny Whoop. For 70 EURO you get the Mobula 6 with the best Runcam Nano 3 camera with internal FrSky or Flysky receiver.

my video review DE with EN subtitles
Happymodel Mobula6 bester 65mm TinyWhoop (7 min 0 sec)


I find the Mobula 6 very successful, inexpensive and perfect for beginners as well as for professional FPV pilots. Such a 65mm TinyWhoop is absolutely necessary for the winter time.

Mobula6 with coupon: aFfBg10 - https://www.banggood.com/custlink/KvmGg2tm9g
The Mobula6, a TinyWhoop with 20g 19000KV motors, Runcam Nano 3 camera, 25mW VTX, 1S LiPo, F4 FC FrSky or Flysky. With 19000KV the flies about 4min well through the apartment. With 25000KV the Mobula6 is extremely fast, but the 300mAh battery doesn't even manage 2 minutes. My favorite with 19000KV. And the Runcam nano 3 is sooooo good!


compatible batteries:
Happymodel 300mAh 1S 30C Lipo PH2.0
Banggood - https://www.banggood.com/custlink/GGKvbkIwt5
Original battery from Mobula6
...Continue Reading
Posted by kopterheld | Jan 30, 2020 @ 05:17 PM | 1,738 Views

GEPRC CineRun HD3 3 CineWhoop
Coupon: aFfBg10 - https://www.banggood.com/custlink/mDDDnSc5Gj
The new CineWhoop from GepRC with 215g weight with DJI Air Unit without a battery. Flies very quietly perfectly for video recordings with the DJI camera or even with the GoPro camera with the included GoPro 7 mount.

My Review: GEPRC CineRun HD3 CineWhoop with GoPro 8 (DE with EN subtitles)
GEPRC CineRun HD3 CineWhoop mit GoPro 8 (4 min 34 sec)


Pros:
Light Cinematic Whoop
can carry a GoPro Hero 6,7,8
- included GoPro 6,7 Mount
- good motors 1404
- DJI Air Unit with 1080p DVR
- durable prop guard
- F7
- bidirectional BLHeli_32 ESC's 35A

Cons:
- nothing

The flight time is aprox. 3 minutes with 850mah LiPo. If you only need a 3inch professional cinematic whoop for GoPro7 or 8 the best choice is the Diatone MXC Taycan
or iFlight BumbleBee. Both are optimized for carrying a GoPro and are more durable with the big ducts with foam. But for me is the GepRC CineRun the best because the HD Video from DJI system is good enough for me. And I can freestyle flying with the CineRun HD3. And when I need 4K quality video I can make it with the GoPro8 on my CineRun too. Diatone Taycan or iFlight BumbleBee are terrible, to heavy for acro freestyle with the big ducts. If you have a freestyle drone and you use only GoPro Hero for professional video then take a drone with ducts

Diatone MXC Taycan - https://www.banggood.com/custlink/mDmmAaZ0av
iFlight BumbleBee DJI...Continue Reading
Posted by kopterheld | Jan 22, 2020 @ 09:36 AM | 8,178 Views
FatShark Dominator HDO 2
408,64€ - $455 - 9% Coupon: 2020cNy - https://www.banggood.com/custlink/KmGKeeY4pN
9% Coupon: 2020cNy gilt auf alles auch FPV Sachen.
Fatshark HDO2 with new 1280x960 (4: 3) OLED displays and 46 degrees FOV. The best FPV goggles on the market
Banggood guarantees duty-free shipping via Priority Direct Mail or EU Priority Line


Video - FatShark Dominator HDO 2 TBS Fusion RapidFiRE and antennas DE (EN subtitle)
FatShark Dominator HDO 2 TBS Fusion RapidFiRE Module Antennen (7 min 44 sec)




Pic 1 - Fatshark HDO 2 delivered from Banggood

...Continue Reading
Posted by kopterheld | Jan 19, 2020 @ 08:55 AM | 6,972 Views
Eachine EMAX EAT03 RC Car
Coupon: BGEachineFPV - https://www.banggood.com/custlink/vmDGQKe3AR
77€ - with FPV goggles
EMAX EAT03 is a small RC car with FPV camera and remote control. Great toys for every young RC beginner. Identical to the EMAX Interceptor RC car.


The red EMAX Interceptor RC car is identical with the blue Eachine EAT03
Coupon: BGEMAXRC - https://www.banggood.com/custlink/mKvmQ0Ptop
Coupon2: 5ca607


Video - EMAX Interceptor Eachine EAT03 FPV RC Car (DE) (EN subtitle)
EMAX Interceptor Eachine EAT03 FPV RC Auto (3 min 23 sec)


It is really fun to drive around the apartment by car. Since the car is very small, it can get through almost any small gap. The perspective is funny as if you were a little mouse running through the apartment. Behind thicker walls, the video reception is worse, so a better antenna may help. A great FPV car that I can recommend to everyone.
And as I said, the difference between Eachine EAT03 and Emax Intereptor is only the color blue instead of red.


...Continue Reading
Posted by kopterheld | Jan 17, 2020 @ 02:31 AM | 8,192 Views

This is an adapter to connect an analog diversity module to the DJI Digital FPV goggles outside by cable. Clean solution, but you should install the current DJI update to at least v01.00.02.00 so you get very low latent times up to 20ms. So you don't need any other analog FPV glasses anymore !!
A video module is simply plugged in here and you can fly analog tiny whoops, toothpicks.

URUAV RX PORT 2.0 DJI Digital FPV - https://www.banggood.com/custlink/vvmGbyC4Vi


Video - DJI FPV goggles with analog Module - RX Port (DE) with EN subtitle
DJI FPV Brille mit analog Modul RX Port (3 min 29 sec)


...Continue Reading
Posted by kopterheld | Jan 14, 2020 @ 12:26 PM | 5,344 Views

Beta95X Whoop Quadcopter with DJI Goggles Bundle Coupon: $5offde53d63dcc17
and use the GiftCARD to save 5% more coupon: GiftCARD http://bit.ly/BetaFPVgc
BetaFPV - http://bit.ly/Beta95Xi
NOW available from BetaFPV
The Beta95X has the CadDX Vista DJI Air Unit which is flown with the DJI goggles. The recording in 720P takes place on the goggles. The quad has 2.5 inch propellers with F4 FC, 1106 4500KV motors and 32 bit ESC's with 16A. Empty weight 110g. It is flown with a 450mAh 4S battery


When the Beta85X HD came onto the market, the enthusiasm was great. Unfortunately, the Beta85X was a bit too heavy for the 2 inch propellers, so you could fly around with it, but real acrobatic tricks do not go so well. The Beta85X 4K also had a really good FPV camera with 4K video recording, but was even worse to fly.
Video 1 review - Beta95X with Caddx Vista DJI camera (EN subtitles)
Beta95X DJI Digital HD Whoop Caddx Vista (6 min 50 sec)

Now comes the Beta95X HD which either has an analog HD camera or even better, with the DJI digital video transmission. The Beta95X has the DJI camera with the digital air unit CADDX Vista VTX under the blue canopy. Now you can fly with digital technology from DJI FPV with razor-sharp FPV live images and the video can be saved in HD ready quality in the DJI glasses , only 720p. The DJI camera with the CADDX Vista VTX weighs just 29 grams. There is also a decent 3.5 gram RushTank antenna. Here, the recording function in the Air Unit was...Continue Reading
Posted by kopterheld | Jan 12, 2020 @ 10:03 AM | 3,704 Views

Here is the SkyStar Talon X110 and show how to make all settings under BetaFlight 4.1 with the new RPM filter. The best future is the bidirectional DSHOT protocol firmware for BLHeli_S ESC's and you can fly all mini quads 2-3 inches and even TinyWhoop with the RPM filter. And that means: even better control and smooth flight.


Video 1 - Skystars Talon X110 BetaFlight 4 1 BLHeli_S RPM Filter (DE) with EN subtitle
Skystars Talon X110 BetaFlight 4 1 BLHeli_S RPM Filter (10 min 26 sec)



This is how I set the RPM filter:
1. Install the BLHeli Configurator 1.2 (* 1)
2. Connect the Talon X110 to PC via USB and power on with battery
3.Open BLHeli Configurator and note the type of ESC's (O-H-10)
4. go to JazzMavic GitHub and load the latest BLHeli_S firmware 48k 16.78 a12
5. Flash all 4 ESC's with the JazzMac BLHeli_S 16.78 firmware
6. Start Betaflight Configurator
7. Flash Beta 4.1.X to your FC
8. In the Configuration tab, set DSHOT300 because it works flawlessly on the Talon, better than DSHOT600 with more flight time
9. activate bidirectional DSHOT
10. Set motor poles to the number of magnets on your Kwad. Talon has 9 poles.
11. Set the gyro and PID frequency to 4k/4k or 8k / 2k or 8k / 4k or 8k / 8k so that the CPU load is below 40 percent. I'm using 4k/4k
12. Of course set up your receiver and set the correct stick values min, max with the command: rxrange
13. Set switch for motors, flight modes, beeper
14. Under the Motors tab, check whether all...Continue Reading
Posted by kopterheld | Dec 17, 2019 @ 08:21 PM | 9,859 Views
Binding to X9 Lite or X9 Plus 2019 EU LBT is now possible with Betaflight with the OnBoard receiver. You have to wait at least 2:10 minutes for the binding to be completed. And then save everything manually under Betaflight CLI. I hope the issue will be fix in the next Betaflight 4.1.X

Get Meteor65 from BetaFPV - http://bit.ly/BFMeteor65
Use the GiftCARD with 5% off Code: GiftCARD here - http://bit.ly/BetaFPVgc

22000KV Version - Amazon - https://amzn.to/35vY9ti
19500KV Version - Amazon - https://amzn.to/35y6ixu

How to bind Meteor65 to X9 Lite
(build-in SPI RX FRSKY_X_LBT)
write to CLI:
diff all
copy to clipboard and save to text file
write to CLI:
defaults nosave
set rx_spi_protocol = FRSKY_X_LBT
save
4. After FC has rebooted write to CLI:
bind_rx
5. start bind button on the X9 Lite
6. after 55 sec. write to CLI:
diff
7. copy all frsky_spi commands to text file
8. check if the command set frsky_spi_bind_hop_data did not have any 0 at end.
If you have some 0 at end repeate the step 6. to 8.
9. write your current RxNum from the X9 to CLI (my is RxNum = 7):
set frsky_x_rx_num = 7
save
10. check the RSSI on the X9 Lite. If no RSSI move the X9 Lite one meter from the 
Meteor65 and repeat step 3 to 9.
11. Copy the new 4 frsky_spi commands from CLI to your
text file and replace the old4 frsky_spi commands
12. Copy your text file to clipboard and paste to CLI
13. The Meteor65 rebooting and it is now connected with your X9 Lite
and have your old configuration.

...Continue Reading
Posted by kopterheld | Nov 15, 2019 @ 10:11 AM | 4,695 Views


The Nazgul5 is a very good freestyle drone that flies smooth as butter with 4S or 6S battery. The Stack is with F4 FC and 45A ESC's. The video transmitter is 25-600mW and at the front is the good CADDX Ratel FPV camera. The iFlight Xing-E 2207 2750KV motors are great even though they are entry-level motors.
6S - Coupon: BGnazgul https://www.banggood.com/custlink/GD3KgGYqMc
4S - Coupon: BGnazgul https://www.banggood.com/custlink/3mmm4mhMzh
oder 10% Coupon auf alles: BGBFAFF2019

Very good propellers are the HQProp Ethix S3 DP5.1X3.1X3
Amazon - https://amzn.to/2MdVOdY
Banggood - https://www.banggood.com/custlink/mvmG4dnULK


Runcam 5
Amazon - https://amzn.to/2nexDUp
Coupon: BGBFAFF2019 - https://www.banggood.com/custlink/KGmmBdQkTc
...Continue Reading
Posted by kopterheld | Nov 15, 2019 @ 06:39 AM | 4,159 Views


The iFlight Titan DC5 is a 5 inch FPV freestyle drone with 222mm. The special thing about the drone is that it has the DJI Air Unit and can be flown with the DJI Digital goggles. The video image is digitally transmitted at 720p 120 frames per second to the goggles. At the same time, the video can be recorded in HD with 1080p 60 frames per second on the drone on a micro SD card. So you really do not need a GoPro camera anymore.

Video 1 - iFlight Titan DC5 6S DJI Digital FPV System
iFlight Titan DC5 6S DJI Digital FPV System (8 min 11 sec)


iFlight Titan DC5
6S - Coupon: BGBFAFF2019 https://www.banggood.com/custlink/mGG3BI80Ky
4S Version - https://www.banggood.com/custlink/3vD30n8snM
or from iFlight-RC - http://bit.ly/iFlightTitanDC5



Or the Bundle iFlight Titan DC5 with DJI FPV goggles
Coupon: BGBFAFF2019 - https://www.banggood.com/custlink/3mmGnmtWkU
iFlight-RC - http://bit.ly/iFlightTitanDC5DJI
...Continue Reading
Posted by kopterheld | Nov 04, 2019 @ 08:33 AM | 3,558 Views
Current I have the DJI FPV System from Banggood and it is amazing for freestyle FPV Racing drone the 3 inch
I'm using only the DJI goggles with the Air unit. My transmitter is the Taranis X9D Plus SE with CrossFire module.
DJI Digital FPV System
628€ - $696.15 - Coupon: BGOTC21 or App Coupon: c5d300 (only 1x for mobile App customer) or aff7off https://www.banggood.com/custlink/mGvK0KF1Em


Pro:
- big screen
- easy to use
- good design
- compatible with betaflight
- good range
- best camera colors
- HD recording on the Air Unit (TX)

Cons:
- only LCD display's
- closed system all components are only from DJI (camera)
- Air Unit is big
- latency to high

The iFlight DC3 HD 3 inch freestyle drone is with a 3S lipo under 250g that very cool to fly without registration.
287€ - $315 - Coupon: aFfBg10 https://www.banggood.com/custlink/DmGDBVekwh



---

Antennas:
DJI is using all LHCP antennas. I have replaced all the antennas with my AXII 2 RHCP antennas (included Air unit with MMCX)

Lumenier AXII 2 Right-Angle Stubby 5.8GHz 2.2dBi Gain FPV Antenna
16€ - Coupon: BGBCFPV - https://www.banggood.com/custlink/3DDDgBLA5A
The new AXII 2 Stubby right angle antenna for FPV goggles
...Continue Reading