Here are the stuff ill be selling in a couple of days

Trex se

hs 65
align motor
align 35 esc

Just Needs a one way shaft adapter
Gears are brand new

Trex 450 xl with modified frame for direct linkage


3 hs56
telebee gyro
nib align 35
3550 kv align motor

Here are some pics of the md500 on the trex already test hovered it but haven't seen actual flight.

Side project while waiting for my heliartist fuse

here are the measurements for an e voyager im planning to convert into scale

Trex cde old version another impulse buy

some pics of stuff

Another addition to the fleet sold my king 2 and bought a cde trex from estarter
here

hs55 axi 22088/20

Bought this from the ad and was advertised as a mangled trex seller was giving it away but for local pick up only. convinced him to sell it to me and ship.

got it with 2 stripped servos and some broken tail bit stuff.

kontronik jazz esc ( good stuff )
GY240
hs55's cyclic
some hitech mg wing servo for the tail



well here it is now after rebuild not bad for an 80 dollar trex.
all i did was buy a new canopy some tail stuff to get it flying, since then i just added some upgrades like new canopy new blades etc.

just a random pics of my slowstick

walkera 4#3
cc25

I just found out that the stock landing gear on almost all my gws planes were weak so i made some minor reinforcements on their landing gear using a 3.5mm carbon rods hopefully it'll work. being a noob myself i can land it pretty decently but almost all of the thin wires will fold and results in a minor crash.

Here are just a couple of pics during the maiden of my 2 warbirds went home with smiles on our faces and some broken landing gear (reinforced them all now with carbon fiber rods)

after A succesful back to back maiden of my p51 and the corsair i decided to open another kit (my last one) Its a TM400 i have already finished attaching the ailerons and the elevator. Painted it really thin with testors metallic gray just to get rid of the white styro look. Some pics

my gws corsair Had a problem seeing it in the air because of the dark color otherwise it flies really good.

pics of my latest build not yet finished though have no idea that putting electronics on this plane would be a pain in tha

Just finished building my estarter i better put some pictures here before i destroy her on the maiden flight note the 3m packing tape all over for reinforcement on critical damage prone area. I hope i didnt mess it up with these added weights. This is my 1st 4 channel plane i used the 4 servo configuration buried a servo on each wing. Hope that the cheap suppo motor 1800kv / esc 18 amp combo will hold using a 3s lipo and an 8x6 slow flier prop.

000