Posted by cuavlindy | Jun 14, 2019 @ 04:02 AM | 495 Views
Welcome SHENZHEN INTERNATIONALUAV EXRO 2019, we will right here waiting for you !

lindy liang
Guangzhou Lei Xun Innovation Technology Co., Ltd
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Postal code : 511458
Tel: 13570272379
Wechat:0086-13570272379
E-mail :[email protected]
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
http://doc.cuav.net/
Posted by UnknownForces RC | Jun 14, 2019 @ 02:08 AM | 480 Views
V2 UFRC GX1 8s 1st run and thoughts! (11 min 51 sec)


another testing video from our UK customer see how excellent and strong our Growler GX1 buggy runs
Posted by Bebbs78 | Jun 13, 2019 @ 11:52 PM | 448 Views
Can anyone tell me how many mixing channels the AT9S Radiolink controller has. Thanks in advance.
Posted by turbinefancy | Jun 13, 2019 @ 10:59 PM | 491 Views
Practice close formation with a T-34 and a German biplane flying from the cockpit of Avios Spitfire using head-tracking FPV. A few near misses. Enjoy!

Spitfire FPV Formation with Head-tracking (5 min 19 sec)

Posted by DoubleEagle | Jun 13, 2019 @ 10:44 PM | 459 Views
***Building Blocks with Remote Control Kaka and Dada Toy Robots***
The CaDA 2-in-1 sets, you get to choose between 2 exciting builds for even more build and play fun.
CaDA (breaking blocks) Building Blocks + Remote Control Toy Series.

CaDA Building Toys STEM Learning and Educational Kit.
These bruilding blocks remote control Kaka(C51027) and Dada(C51028) toy robots consist out of 710 and 606 pcs and are suitable for kids from 6 years old. Item numbers: C51027 and C51028. Remote control is included.

For more building block and remote control toys visit: http://en.doubleeagle.cc/
Business enquires: [email protected]
Building Blocks Remote Control Toy Robots (1 min 13 sec)

Posted by Swath | Jun 13, 2019 @ 10:03 PM | 458 Views
I have discover the buzz about the Tiny Whoops.

Some time ago I tried to get a Bat 100 up and flying but never did figure it out. Sat by my computer staring at me, day after day.

I was in a RC store grabbing a couple things when I saw them flying a Blade Induxtric Switch. It looks very smooth in the air. I bought one just to give it a try.

I had flown the Blade double rotor helicopters for a while and enjoyed that immensely. I have about 6 controllers for those so I figured I could, and did, just bind and fly with those.

This led to me searching the net, hearing about these Tiny Whoops, and eventually buying the parts to assemble one. My first was the brushless with 19k motors. I had some time ago bought a DX6 and box headset so I got those hooked up and began to learn to fly these little buggers. Man is it fun.

It took me a good week or two flying in the house then a little outside before I finally could handle trying to fly with the headset on. Still took some learning and flying but currently I am flying OK with the headset. Getting better the more I fly and practice for eventually participating in a whoop race.

I now have a brushed whoop using the original FC board from the Switch. I have been flying the brushless whoop as much as possible but I have now broken 2 cameras and needing another so the Switch has been my learning rig cause it is still flying. The Switch did not come with a camera but it does have a connector. I bought a camera...Continue Reading
Posted by Swath | Jun 13, 2019 @ 09:38 PM | 465 Views
SCX 10.2 I converted over to Game Changer Chassis from The Crawl Space.

SCX 10.2

RGT Rock Cruiser
Posted by wattechighland | Jun 13, 2019 @ 09:31 PM | 432 Views
2019.01.21 (Mon)
WTCを分割して各切断面には糊代となる枠を接着し、カーボンロービングで補強。
隔壁にはnegative ballastのシリンダーと配線を前後の空気室に通すためのパイプを設置。
シリンダーはPP対応のスーパーXで接着。
配線パイプは短いパイプを瞬間接着剤とエポキシレジンで接着。長いパイプはそれぞれ空気室側で
短いパイプにスーパーXを被せるように接着する。水密と分解可能にするため。

前部隔壁をテープで仮留めして、negative ballast tankピストンの動作確認を行う。

ニチモ 伊19 WTCを3分割とネガティブタンクピストンの動作確認 (0 min 40 sec)

Posted by 2sg1bigc | Jun 13, 2019 @ 05:37 PM | 344 Views
Hi, I am looking for a set of plans for a radio control motor cruiser called MISTRAL, the only information I have is a copy of an article from a 1974 magazine called I believe Modelar Lublanska 57, 120 00 Praha2, CSSR, the article was written by Ivan Gavora and Jan Horak. I think it might have been a russian magazine. If you want to see what it looks like check ebay item number 273868439287 which appears might be a copy. I know its not a lot of info but please try your best.
Regards,
Colin.
P.S. I am new to the site so be gentle with me!!!!!
Posted by FR4-Pilot | Jun 13, 2019 @ 05:26 PM | 315 Views
This was supposed to be an Eachine Diversity Receiver/Monitor with DVR.
This is what was received ...
Posted by kloberth | Jun 13, 2019 @ 01:32 PM | 310 Views
Hi
i recently set up a micro minimosd v2 board and got it working but if i arm the video signal is dead.
i checked: the camera and vtx are working if i hook them up directly.
I dont really know what to do please help

Thanks
Posted by 73icarus | Jun 13, 2019 @ 01:05 PM | 319 Views
Not much to look at, but outright this is my favourite plane to fly. Still going strong since being built in 2014. It can do anything and fly from anywhere. I left the fuselage open and covered what woodwork there was with a fine cloth/resin finish. Flying surfaces are solar film...
Posted by 73icarus | Jun 13, 2019 @ 12:35 PM | 331 Views
Used this as a bit of a blank canvas for a bit of detailing. The base colour paints are Dulux matt emulsions that I had mixed up at a DIY store (Homebase). They stick pretty well considering the usual problem associated with painting Epo foam. Used Fisk film for the roundel masks and also for the lettering masks. It flies really well too!...Continue Reading
Posted by 73icarus | Jun 13, 2019 @ 12:11 PM | 333 Views
Stripped it down, recovered with solartex and a bit of glass/resin...then lots of masking and airbrushing for all the markings. Also converted to electric. Masking the stork was a nightmare... ended up using matt fisk film, tracing the design on to it and then spending a couple of hours with a new scalpel blade making a one-time mask. Same process for the "12". Used fisk film for the roundels as well and just prayed that it wouldn't bleed too much....Continue Reading
Posted by Bunnyshooter223 | Jun 13, 2019 @ 10:27 AM | 356 Views
I noticed three Saito FA-30 owners mention thier engine had no Cam Cover Gasket nor a rear case gasket!

I think this is interesting and want to see if any other Saito FA-30 (or FA-30S) owners out there noticed this about thier engine.

It's not necessarily a bad thing and seems the engine may have been designed to omit the particular gaskets. So it may or may not be 'missing' but rather designed that way.
Perhaps, being so small, it doesn't need them...

Feel free to post your response below as well as any random thoughts
Anyhoo, good day y'all
Posted by GroundControlRC | Jun 13, 2019 @ 07:41 AM | 347 Views
Tip #25 - Brushed Motor & ESC - No Throttle Response?



Here is a link to the Video:
https://www.youtube.com/watch?v=i_pvZ7A7jYQ

I have not worked with Brushed Motor & ESCs very much and recently had an issue where the Servos were working fine but I had no Throttle response.
I found the issue and if you're having the same problem this information may get your throttle working.

Here is a link to the Micro Receiver:

2.4G 4CH Micro Low Voltage DSM2 DSMX Compatible Receiver Built-in Brushed ESC
https://www.banggood.com/2_4G-4CH-Mi...47791920140372


Here is a link to the Brushed Motors & Props:

1.2mm Propeller and 1020 Coreless Motor Set for 90mm-150mm DIY Micro FPV RC Quadcopter Frame
https://www.banggood.com/1_2mm-Prope...47791920140372


Here is a link to the Servos:

TY Model 1.7g Servo With JST 1.0mm Plug Compatible Spektrum 6400 Series Receiver
https://www.banggood.com/TY-Model-1_...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by nigelsheffield | Jun 13, 2019 @ 06:59 AM | 475 Views
If anyone wants fpv watch or goggles in the UK I have some from xt-xinte stored in my garage ready for quick delivery.
Xt-xinte said they will sell them for $25 each posted in UK, I only have 10 goggles and 7 watches here so it's just a favour I'm doing for them clearing some stock.

Links to buy from xt-xinte UK stock.

https://m.xt-xinte.com/h-product-det...oods_id=592554

https://m.xt-xinte.com/h-product-det...oods_id=592557

I will delete this once sold.

Shipping will be normal post office second class and is included in the $25 (( 20 )
Posted by LemonC | Jun 13, 2019 @ 12:44 AM | 400 Views
Hero Hypersmoothing (2 min 37 sec)


I tried out Hypersmooth for the first time the other day.


Also i was having an issue with my TBS unify race locking me into pit mode when id powerup my quad. I had set the vtx into race mode via the betaflight osd which at the time i didnt realize puts you into pit mode when i power on... After lots of resetting the damn thing, i finally figured out i had to unock the vtx via the button push method, once it was unlocked, then i was able to reset the vtx via the osd into 'free' mode... now it powers up 'normally' for me again. im generally a set it and forget it pilot... :/