cuavlindy's blog View Details
Archive for June, 2018
Posted by cuavlindy | Jun 26, 2018 @ 02:38 AM | 2,726 Views
last week, In shenzhen , Jani Hirvinen Drone developer and CUAV products in the show World UAV Federation
Posted by cuavlindy | Jun 22, 2018 @ 02:11 AM | 2,675 Views
CUAV from Guangzhou, China, has newly developed a new Pix codenamed V5. It will start a global public test recently. The following are known materials:

TB2q5b6q21TBuNjy0FjXXajyXXa_!!12580599TB2q5b6q21TB uNjy0FjXXajyXXa_!!12580599.png750x756 325 KB
Quick Summary
•Main FMU Processor: STM32F765◦32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM

•IO Processor: STM32F100◦32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM

•On-board sensors:
◦Accel/Gyro: ICM-20689
◦Accel/Gyro: BMI055
◦Magnetometer: IST8310
◦Barometer: MS5611

•Interfaces:
◦8-14 PWM outputs (6 from IO, 8 from FMU)
◦3 dedicated PWM/Capture inputs on FMU
◦Dedicated R/C input for CPPM
◦Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
◦Dedicated S.Bus servo output
◦5 general purpose serial ports
◦4 I2C ports
◦4 SPI buses
◦Up to 2 CANBuses for dual CAN with serial ESC
◦Analog inputs for voltage / current of 2 batteries

•Power System:◦Power: 4.3~5.4V
◦USB Input: 4.75~5.25V
◦Servo Rail Input: 0~36V

•Weight and Dimensions:◦Weight: 90g
◦Dimensions: 44x84x12mm

•Other Characteristics:◦Operating temperature: -20 ~ 80°c

It is known to use the F765 processor and many other upgrade updates. But I don’t know if the current Ardupilot firmware supports it or not. I’m going to use a traditional helicopter to test this flight control. I need to ask whether AC 3.6rc1 FW supports this.

Web:http://doc.cuav.net/flight-controller/pixhack-v5/en/147

Any more details , just feel free to contact us


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Wechat:0086-13570272379
E-mail :[email protected]
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | Jun 22, 2018 @ 01:43 AM | 2,722 Views
CUAV Pixhack v5 has already performed a preliminary test flight on the Alzrc 420 three-bladed version of my 420-level RC helicopter. It performs very well in all aspects. For example, the calibration process, vibration control, and flight stability of each sensor, the actual flight effect is still Quite well, thanks to the developers of ArduPilot, @tridge、@rmackay9、@ChrisOlson. they have efficiently released the Dev version firmware with great usability.
Posted by cuavlindy | Jun 11, 2018 @ 10:31 PM | 1,783 Views
CUAV Buyer funny flying

have you try to fly like this ?



CUAV Buyer flying (0 min 8 sec)

Posted by cuavlindy | Jun 11, 2018 @ 01:19 AM | 3,619 Views
Hi dear friend

our new pixhack V5 will online next month.
more detail can check the PDF or here for the instruction of pixhack V5

http://doc.cuav.net/flight-controller/pixhack-v5/en/

here is our ArduPilot Developer testing the pixhack V5 for your reference:

Pixhack V5 Continued Flight Testing (4 min 13 sec)



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :[email protected]
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/