Posted by Tazkiller85 | Today @ 06:05 AM | 31 Views
Yep Les Amis,
Fini de tricher !!! lol. Je n'ai pas pu résister à partager avec vous cette petite appli très complète et efficace. Il y a maintenant beaucoup de Fans, comme moi, de ces petites voiture au 1/76, les TURBO RACING ! Et bien, une fois que vous avez construit votre circuit, voici l'élément indispensable à ajouter, le commissaire de course incorruptible, LAP TRAX ! Le plus compliqué sera de lui trouver l'emplacement adéquat car ensuite, tout est prêt pour lancer la course à plusieurs. Temps intermédiaires, Temps total, Classement, Commentaires, etc ... Tout y est pour une application totalement gratuite ! ... Bon Film et merci à tous pour votre soutien .

Turbo Racing Lap Trax ! - Review Test Démo - Un arbitre incorruptible !!! (10 min 18 sec)


NOTATAZ : 20/20 Appli incontournable pour la course !!!

Les + : GRATUIT !
Les - : ...

- Turbo Racing RTR 1/76 (Coupon BG174TRU1 ) 52.67 Entrepôt CN: https://bit.ly/2JzOxYy
- Turbo Racing BNF 1/76 : https://bit.ly/2KbF2zb
- Turbo Racing RTR 1/76 PASTEL : http://bit.ly/35jxcuH
- Tapis Mini Turbo Racing : https://bit.ly/3pmwAwS
- Pièces détachées (AliExpress): http://bit.ly/3i30rr6
- Radiocommande programmable TURBO RACING : https://bit.ly/38EW5Uk

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 RC et ACCESSOIRES (remis à jour régulièrement, en utilisant ces liens, vous aidez la chaîne, ) : http://bit.ly/2OiQMPF

- Ma page BANGGOOD ( gardez ce lien en favori ou raccourci pour vos achats sur...Continue Reading
Posted by Tazkiller85 | Today @ 06:02 AM | 43 Views
Yep Les Amis,
Un concept novateur, HGLRC frappe fort encore une fois en s'associant à DAVE.C ! Cela n'a pas été facile pour moi d'attendre 10 jours pour enfin vous parler du test du tout nouveau REKON 5 . Une conception de FRAME unique, des moteurs 6S allégés, un équipement très complet et surtout, un prix très abordable ! Du déballage à la mise en route, que des bonnes surprises, et au premier vol, que du bonheur !!! Je ne vous en dit pas plus car tout est dans la vidéo, mais, en bref, BRAVO à DAVE.C et à HGLRC pour son écoute et son sens de l'innovation ... Bon Film et merci à tous pour votre soutien .


REKON 5 Mid/Long range Freestyler - Review Test Démo - DAVE.C et HGLRC !!! (48 min 7 sec)


NOTATAZ : 19/20 Belle innovation !!!

Le seul reproche : Des sangles lipo plus résistantes ( Kevlar ) et une un peu plus longue pour les grosses lipos...

Unboxing / Description: 00:15
Sur le terrain : 14:20
Vol à vue : 17:05
Vol en FPV en 5S : 19:20
Vol en FPV en 4S Li Ion: : 27:51
Vol en FPV en 6S Freestyle : 35:34
Débrief et conclusion : 41:50
VOL EN MUSIQUE : 40:08
Mon betaflight : 47:18

Chez Banggood :
- REKON 5 HD (coupon BGAFF10OFF ) : http://bit.ly/38V7D5u
- REKON 5 analogique (coupon BGAFF10OFF ) : http://bit.ly/2LEe4RQ
- Pad anti dérapant lipo (collants) : https://bit.ly/3nt56EK
- Batterie ZOHD Li Ion 3500mAh : http://bit.ly/2XQEuSJ
- Lipo GNB 6S 1100mAh : http://bit.ly/3qw153b
- Lipo GNB 6S 1250mAh : http://bit.ly/3imFnvT
- Lipo 4S 1500mAh CNHL :...Continue Reading
Posted by pixhawk2.1 | Today @ 04:19 AM | 289 Views
Hi all,
Im facing issue in bicopter flying through pixhawk.
whenever I try to take off from the ground the bicopter spins (yaw) in both the directions.

I calibrate all the required things and done the integration according to ardupilot web page:
M1 - Throttle right (Motor) - Clock wise prop
M2 - Throttle left (Motor) - Counter clockwise prop
M3 - Servo right (Servo)
M4 - Servo left (Servo)

Please find the log and parameter attached in this post kindly help on this issue.
Posted by Mandy Chen | Today @ 01:38 AM | 605 Views
What motor do you use on your 9 inch building?

Avenger 2812 V3 motor.
KV: 900kV/1115kV

WhatsApp/Skype: +8613670131260


#BrotherHobby #Avenger2812 #9inch
Posted by mjnco | Yesterday @ 11:27 PM | 944 Views
My H9 30cc spitfire next to club members TopRC spitfire. I sure do like the appearance of his Spitfire. This is my second H9 spitfire. Mine flies nice and smooth and when landing it just sticks to runway. The TopRC spitfire is gas powered and has problems with engine getting hot.

I extended the firewall about 3 inches and still needed about 6 oz. lead bolted to firewall.

eflite P160
castle 120 HV esc.
2 6s 5000 lipos
APC 20-15 e prop
Posted by Mandy Chen | Yesterday @ 10:55 PM | 1,048 Views
How to assemble the battery into the skateboard?

Land SnaiL 930 E-Skateboard:
Original imported battery with depth customized BMS with 6 protect functions to ensure the safe using.

WhatsApp/Skype: +8613670131260


How to assemble the battery into the skateboard (1 min 46 sec)


#BrotherHobby #LandSnaiL #ESkateboard #LandSnaiL930 #electricskateboard #esk8 #eboard #eboarding #electricskateboarding #skateboard #skate #electricscooter
Posted by QuadifyRC.com | Yesterday @ 10:54 PM | 1,052 Views
Below is a link to my review on the Diatone Roma F4 LR micro long range quadcopter.

https://www.quadifyrc.com/reviews/diatone-roma-f4-lr-review-and-diatones-attention-to-detail


In this review I cover:
  • Discussion of specs
  • A look at the frame design and build quality
  • Betaflight setup
  • Flight performance
  • Battery options and flight time
  • GPS performance
  • Nebula V2 cam vs Nebula Pro
  • Final comparison to other micro LR quads and conclusions

This is a text and picture review, not a video review, hope you find it useful



.

Posted by Jack Crossfire | Yesterday @ 10:46 PM | 1,073 Views
Another 8.7 mile drive with stuff came in with the same power consumption as an empty lunchbox: 237mAh/mile. The lunchboxes were pretty efficient, with their gearboxes & roll resistance.


The remote control revision ended up not compelling enough to use. The more compact design just became more natural over time.
Posted by alex_nikiforov | Yesterday @ 10:31 PM | 1,141 Views
Foxeer F722 V2 FPV F7 Flight Controller 3~6S MPU6000 30.5*30.5mm BetaFlight BEC Compatibled with DJI Air Unit

Foxeer F722 V2. Обновленный полетный контроллер по отличной цене. (9 min 2 sec)


Link: Foxeer F722 V2
Posted by PittSpecial | Yesterday @ 10:05 PM | 1,294 Views
Hello good people,

I just Love this hobby.

January 12th, I picked up one of these for a Cool $80 US Cash but, I had to drive almost to Tampa, Florida which is just under one and a half hour drive each way. I saw it over at Face-book Market.

Well, it was worth it, both the Cash and fuel cost.

The model was owned by someone who purchased it from the original owner and he decided not undergo an Electric Conversion which is exactly what I will be doing. The model was maintained at the garage floor and it was certainly flown using GLOW power and it smelled and the covering had this dull look because it was full of Fuel residue.

Came home and using the DAWN Power Wash Ultra it did the trick and the covering looks like new again.

The Right Wing assembly had some damage internally and initially before the purchase it looked like a simple rip but, looking into the Right wing at that location the rib is fractured which really is no big deal. However, just recently, someone posted a Right Wing assembly for this exact model and I jumped on it so, will soon have a nice Great Planes RV-4 (1.4 Size) with the eye candy effects and minimal repairs to be done.

Found an article here on RCG's:
https://www.rcgroups.com/forums/show...-70-ARF-Review

A few pictures....Continue Reading
Posted by Flyonfloats | Yesterday @ 08:52 PM | 1,501 Views
Anybody have an extra Eflite Edge 540QQ Cowl?
Posted by old4570 | Yesterday @ 07:45 PM | 1,679 Views
Ok , looks like I have found an issue with the CG making the A160 a little touchy feely !

Looking inside the battery bay , there was a bump in the foam ( from the moulding ) ..
I got some steel wire , heated one end up ( red hot ) and melted away the bump / protrusion ..

Now the battery slips in further forward . But it's a real slop fit !
So I got some 3mm depron scrap and glued it to one side of the battery bay .
Now the battery is a non slop fit with just a small amount of friction grip .

And for the heck of it , a picture of my micro Rx and servos that replaced the flight control board .

A160 has been handled a lot - paint peeling ! Things needed fixing .....
Posted by old4570 | Yesterday @ 05:58 PM | 1,968 Views
XK A160 with more down thrust (7 min 43 sec)



I may have previously mentioned !
That I removed the motor+ mount and rotated it 180deg for more down thrust !

Because - When I applied power , the nose would lift and the A160 would climb seriously hard over 50% throttle ..
Up to 50% was ok but once I wanted more ( like 100% ) the A160 just lifted it's nose .

Rotating the motor mount seems to have seriously improved things . I did change my elevator setting causing the A160 to climb . I did put in some down trim , but looks like I have to go back where I was .. But never the less a serious improvement .

Having solved one issue , looks like CG might be next . It does hunt up and down a bit and drag it's beehive in turns ( signs of a rearward CG )
Oh well ! Not the end of the world ( like the death spiral ) . I will have to see if I can push / make room . for the battery further forward .


Playing with the CG
Posted by benjamin presten | Yesterday @ 09:30 AM | 3,351 Views
In the 1920s biplane "barnstorming" was going full tilt. A surplus of Standard J1s and Curtiss Jennys had flooded onto the civilian market after WWI and brought the concept of barnstorming with it. As the old surplus biplanes that were only intended for pilot and copilot tired out, there was a big demand for a biplane which seated two in the front cockpit. Throughout the 20s many new companies and models sprouted up to fill this void. Among them were the Travel Air, Waco 9 and 10, Alexander Eagle Rock, Swallow, Command Aire, and the Stearman C3. But in 1928 in Glendale, Brooklyn, New York built by Brunner-Winkle Aircraft Corp., there emerged a new type. The Bird Model A as it became known. With a handsome (and uncommon on civilian production airplanes) "tunnel cowling" housing the radiator and a wing design that neared a sesqui-plane design with most of the lifting area being on the top wing, the Bird was an attractive airplane to look at. Particularly for a Curtiss OX-5 V8 powered airplane, many of which had big forward facing radiators ruining their looks. The airplane was debuted at the Cleveland Air Races in 1929 to a warm reception. After a production run of 85 airplanes, near the end of 1929 a new model of Bird was announced. With the supply of surplus OX-5s running thin and air cooled radials taking precedence, a new power plant was in order. The Bird Model BK was unveiled with a Kinner K-5 radial 5 cylinder producing 100hp (10hp more than the OX-5)...Continue Reading
Posted by RCLCP Podcast | Yesterday @ 09:09 AM | 3,344 Views
RCLCP Podcast | RCBattery.com | Unboxing and Review (16 min 56 sec)


Our good friends (and sponsors) over at RCBattery.com sent us a care package! Many batteries, accessories, and a special gift for Stephen!

We've been using these batteries for a few months now, and are super pleased with the results and performance! Even in the cold Utah months. The construction of the batteries is solid and the connections are all clean. The shape, fit, and weight of these batteries are great!

A few months of flying isn't much, but we have not seen any indication of wear or puffing of the batteries yet. Overall, we are super pleased with the Liperior batteries and would highly recommend them to anyone! They are a great battery at an amazing price!

Be sure to tune into our episodes for discount codes on your orders thru RCBattery.com!


Links to what we got:

https://rcbattery.com/


https://rcbattery.com/liperior-2200m...xt60-plug.html

https://rcbattery.com/liperior-2200m...xt60-plug.html

https://rcbattery.com/liperior-1000m...-jst-plug.html

https://rcbattery.com/liperior-800ma...-jst-plug.html

https://rcbattery.com/liperior-1000m...xt60-plug.html

https://rcbattery.com/liperior-500ma...xt30-plug.html

https://rcbattery.com/liperior-800ma...-jst-plug.html

https://rcbattery.com/liperior-650ma...xt30-plug.html

https://rcbattery.com/isdt-q8.html

https://rcbattery.com/rcbattery-com-...rap-300mm.html

https://rcbattery.com/rcbattery-com-...rap-200mm.html

https://rcbattery.com/lithium-polyme...m-x-300mm.html
Posted by edwardjohn | Yesterday @ 07:36 AM | 3,640 Views
Product : SPCMAKER Mini Whale HD Pro 78mm F4 2-3S Whoop FPV Racing Drone PNP BNF w/ 1103 10000KV Motor 25/400mW VTX RunCam Split 3 Micro 1080P Camera - Frsky
Price : $142 to $155
Link : https://www.banggood.com/SPCMAKER-Mi...1123036201501P


Go straight to the video below to watch my explanation on why the "Sorry."
Do subscribe if you have not done so!
New 2021 SPCMaker Mini Whale HD Pro - Honest Review (7 min 56 sec)


Design - What do you think? Don't you think this is a very good looking mini cinewhoop! Compare to the previous version, this has the motors and propellers beneath!
Name: spc maker mini whale hd pro (2).jpg
Views: 0
Size: 198.4 KB
Description: Name: spc maker mini whale hd pro (3).jpg
Views: 0
Size: 199.5 KB
Description: ...Continue Reading
Posted by RCTechReviews | Yesterday @ 04:56 AM | 3,533 Views
A couple of weeks ago, I found the Wltoys 12404 Rc car online. However, there were no reviews on it, so I picked one up from Gearbest, and this is my review of it. First of all, I received it with two days shipping, and it arrived perfectly fine and on time. It costs just $75, so I set my expectations pretty low.

Here is a list of what is included:

- A cross wrench for the wheels

- An extra pinion and spur gear

- A charger

- A rechargeable battery

- User’s manual

- The radio

- The Car itself

I will just go from the top. First of all, the cross wrench is just plastic and might wear out over time. However, I didn’t find any need for it, as the wheels stay on pretty tight out of the factory. Next, there are two extra gears. They are plastic, but hold up fine. I have not counted the teeth, but I would assume they are the same as stock. They are pretty easy to install if you feel the need to.

Now, the user’s manual I received was in pretty bad shape, and had quite a few tears. I am assuming it is just a one off. Most of the information was standard, although there were some very useful blown-up diagrams of the insides of the car. There is also a full listing of spare parts in the manual. I don’t know whether or not they are available as of now, but I haven’t needed any anyways.

The charger is very standard of Wltoys, not to say that is a bad thing. It comes with a euro plug, so if you are in North America, like I am, you will need to request an...Continue Reading
Posted by edwardjohn | Yesterday @ 03:48 AM | 4,295 Views
Eachine Airloader! This is my new favorite looking plane of year 2020! Instantly felt in love with the look and it being a twin tractor!

Product : Eachine Airloader 1280mm Wingspan Twin Motor Three Motor EPP Ultra Long Range FPV Plane RC Airplane KIT/PNP - KIT
Price : $146.99 for KIT and $196.99 for PNP
Link to get one : https://www.banggood.com/Eachine-Air...1123036201501P

*Disclaimer : this is a review unit provided by Banggood

Despite the brand name Eachine, this is actually designed by the same LTE owner/designer who licensed it for sale to Eachine only.

I get it if some think this is an ugly plane especially with that large opening at the front. Beauty is subjective. Me I think it's the best looking FPV plane from LTE with that evil droid/robot like fuselage from the future. With that Twin Tractor setup, it makes hand launching a piece of cake! You will understand when you have one like the Xuav Clouds and Albabird! I fell in love with it instantly and requested for a review unit from BG which they gladly obliged. Thank you!
Name: Eachine Airloader design.jpg
Views: 0
Size: 129.4 KB
Description:


Below is a temporary setup. I want to go light for maiden so there's only 4S 3000mAh in it. It's definitely designed to carry a lot of batteries/mAh to go for long range.
Name: Eachine Airloader design 2 (1).jpg
Views: 0
Size: 160.9 KB
Description: ...Continue Reading