When your in a pinch for a small gear puller, l used 1/4" key stock and a little grinding, square nuts, and a long small bolt.
So l decided to kill two bird with one stone on the Dragon class.
A multi rig sailbox.
And a cool buggy to carry bouys and rescue boats and sailboats.
A multi rig sailbox.
And a cool buggy to carry bouys and rescue boats and sailboats.
You know when you need to countersink in a very tight area but you can't fit the drill?
Well he's an idea to use.
With a (fuller bit) or what you have, drill the hole then reverse the fuller bit.
don't for get to run the drill backwards or the cutter won't cut
Well he's an idea to use.
With a (fuller bit) or what you have, drill the hole then reverse the fuller bit.
don't for get to run the drill backwards or the cutter won't cut
You know when you get tired of moving a 50lb compressor around the shop
you build a cart!
Oh ya, BTW those wheels are from my daughters training wheels of her first bike, 10yrs ago.
Never throw away something that will be use full yrs down the road...
you build a cart!
Oh ya, BTW those wheels are from my daughters training wheels of her first bike, 10yrs ago.
Never throw away something that will be use full yrs down the road...
These were made for a local skipper
The first three picture's shows 1/8 door skin used.
The other three shows 5MM ply.
The first three picture's shows 1/8 door skin used.
The other three shows 5MM ply.
This is the new tool in my shop and it might help save my life.
My Df65 sail box with built in handle
