The PasserX
My Build
Choosing this Glider was easy. Cost is a key factor, the power set up was not as easy.
I wanted to stay under 24oz. I think i'm at 20 to 22oz with the PasserX
I went with the Propdrive 28-26/1000kV 315 watt,and the 30A Red Brick on 3s 1300 45/90C with an 11x8 prop. She will climb all most at 90* For the servos I used the Turnigy XGD-11HMB Digital Mini Servo.
Update stoped useing the 3s1300 lipo and wint with a 3s 850 mah 45/90C and plan to use a 10x6 cam prop this will lighten the glider even more. Test flew WOW much better this change slowed the glider down in the glide. glide slope i
Rx is the 6ch FrSky with a thermal scout on the telemetry AZ out put on Ch6 My Tx is a Jr9303 A/S with frsky telemetry DJT.
So far I can say that the PasserX is hands down one of the best for its price point. My set up is all HK and I love it.
I ordered the white because that was the only one R2 had at the time. The all white bottom is not good when flying when clouds are around. So I striped off the white under side and spiced it up a little with park light. This lightend the glider as well. AUW 22
...Continue Reading
