Posted by corsair167 | Today @ 11:02 AM | 82 Views
about 4 yrs ago I was told about my Parkinsons. Tremors in Rt Hand first. and stooped posture, slow walking, reduced handwriting, and balance issues.

was told about Rock Steady Boxing for Parkinson's patients 2 months into the program I have lost 10# and 2 1/2 inches. A GREAT PROGRAM for coordination, flexibility and balance.............. and it;s about what YOU can do NOT what you cannot do. I can testify what it has done for me and recommend it for you.
Posted by DutchRC | Today @ 10:16 AM | 90 Views
Hi there guys,

Another radio? What do I need another radio for huh? Well to be honnest I definately don't NEED an extra radio, but I do like flying toy-grade quads around (indoors).
Those quads usually come with pretty nasty radio's, so to upgrade that experience I opted for this new Jumper T12 with Multi Protocol Module

The radio is even available with Hall Effect gimbals (the Plus version) but I opted for the base model myself.

Link to both versions: Jumper T12 (plus) low-cost radio with lots of protocols

In this topic I'll let you know what my experience with this radio is like, but I'd allso be very interested to read Your findings..
First an intro with my initial impressions of the radio:

Jumper T12 (plus) Multi Protocol Radio - 1 Detailed Intro (23 min 18 sec)


Allso.. here is my playlist of general OpenTX Info Video's: https://www.youtube.com/playlist?lis...wOAGd_677edxEU
Posted by John Snow | Today @ 04:58 AM | 215 Views
Preface: Recently, I found some foreigners used the asymmetrical models that the forearm is X shape and the rear arm is positive X shape which can enhance the stability of high speed and turn.
Thus, The FALCON220 is made by the combination of X shape and positive X shape , having Latest motor GTS V2 equipped with one-piece housing RCIN + RUSH TANK + FOXEER Camera & FOXEER Antenna.
In addition, I used the old durable AIRBOT that is the old configuration that blew up the rack earlier because the new version of FC is used up.
Here is the video:
FCF FPV2018/UNION FALCON/RCINPOWER/FOXEER/AIRBOT/RUSH/DALPROP/GWY (1 min 8 sec)
...Continue Reading
Posted by huqingyun | Today @ 03:24 AM | 235 Views
2pcs 3,7v 380mah lipo Batterie und ladegert fr 2pcs Kabel jjrc jjr / c h37 Mini - Baby Elfie Quadcopter
von Generic
Geben Sie die erste Bewertung fr diesen Artikel ab
Preis: EUR 15,98
Angebotspreis: EUR 11,19 GRATIS-Versand fr Bestellungen ab EUR 29 und Versand durch Amazon. Details
Sie sparen: EUR 4,79 (30%)
Alle Preisangaben inkl. deutscher USt. Weitere Informationen.

Dieser Artikel kann nicht nach China geliefert werden. Siehe Details
Verkauf durch RCdeals und Versand durch Amazon. Fr weitere Informationen, Impressum, AGB und Widerrufsrecht klicken Sie bitte auf den Verkufernamen. Geschenkverpackung verfgbar.
Name: 41qsmrFbIFL.jpg
Views: 0
Size: 19.5 KB
Description:

Name: 31C1HkZUmQL.jpg
Views: 0
Size: 11.7 KB
Description:

...Continue Reading
Posted by cuavlindy | Today @ 02:54 AM | 242 Views
hi dear friend
AliExpress 11.11 last day sale in big discount

come and check it: https://leixun.aliexpress.com


if you need whole sale price , just feel free to contact us !

We are CUAV manufacturer,and our company have researched & designed Pixhack V3, GPS, hacklink , 3DR data link , wify link , some new product C-RTK ,4G LTE, and Pixhack V5 Autopilot and so on.

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
http://doc.cuav.net/
Posted by VicT | Today @ 12:23 AM | 301 Views
With most of my models I can taxi around and if needed go to System Setup on my DX9 and look at something or adjust a setting. RF is disabled and when I do this one of my models starts up the motor at low throttle. Of course I go back to transmitting and the motor stops turning. I then disconnect the drive battery and resume my System Setup work then go back to powering up the ESC and receiver. I bind all of my models with the throttle off and with loss of signal the motor stays off. Not sure if its an anomaly or faulty ESC. An arming switch, or plug would be nice to have in or on the model but most do not use it. Ive purchased and used the Deans Safety Plug but want to know the source of the problem. Any one have some ideas?
Posted by Blaze0021 | Yesterday @ 10:55 PM | 320 Views
Saluting all who have served, past, present, and future. Thank you for your service and commitment to our country. God bless you all.

Eflite FJ-2 Fury 70mm EDF Jet - Veterans Day 60-Second Tribute Flight (1 min 8 sec)

A Veterans Day 60-second tribute flight in my Eflite North American FJ-2 Fury. 🔥

Thank you for watching!
Posted by JeffMac | Yesterday @ 07:54 PM | 423 Views
All -

Scanned from my original issue of May 1938 Popular Aviation Paul Lindberg's Curtiss P37 fighter.

Feel free to download these full size plans.....

Enjoy,

Jeff
Posted by Bill M - RC | Yesterday @ 06:09 PM | 472 Views
Hi fellow rc pilots & rc enthusiasts

Jumper T12 Plus review. This Jumper T12 plus Open TX Multi-protocol Radio Transmitter with JP4-in-1 RF Module and Hall Sensor Gimbals review includes unboxing, features, overview, compatible protocols & basic functions.

You can get this here: https://goo.gl/aJ5JPF

Jumper T12 Plus review - Open TX Multi protocol Radio Transmitter (8 min 57 sec)

Posted by yours truly | Yesterday @ 04:16 PM | 488 Views
Just picked up this new blade 360 cfx 3s version the other day and loving it. Before this my biggest heli was the 180 cfx.


Blade 360 cfx 3s at the park (4 min 22 sec)

Posted by jetpilotrich | Yesterday @ 01:19 PM | 566 Views
So far this looks like a sweet Work Stand... I will plan to put out a future video of its use in the field with various models

Enjoy!

CREW ZINN FLIGHT DECK Work Stand & Cg Tester By: RCINFORMER (7 min 34 sec)

Posted by thijs slotman | Yesterday @ 11:27 AM | 596 Views
Posted by TinkleWid | Yesterday @ 10:13 AM | 609 Views
I still think this footage is better than the output of the Runcam Split Mini 2 footage. It's not quite as good as as a Go Pro. The bitrate is fast enough to deal with the sunlight. I'm still working out if the caddx turtle latency and if it affects my flying.

3 INCH FPV QUAD 🐢 CADDX TURTLE v2 🐢 A Bit of Winter Sun in a Cool New Spot (2 min 48 sec)


Equipment Used:
Flying the Kwad Karl (Bando Racer 3) BR3 Frame
XJB 145 build and motors https://www.banggood.com/HGLRC-Flame...18277502201801
Caddx Turtle v2 https://www.banggood.com/Caddx-Turtl...18277502201801
XM+ https://www.banggood.com/Frsky-XM-Mi...18277502201801
VRD2 Pro Goggle
Jumper T8SG
Gemfan 3052 https://www.banggood.com/2-Pairs-Gem...18277502201801

Best firmware versions dated 7th September 2018

Caddx Turtle Settings: 1080p 60FPS
Wide FoV
7 saturation
0 Sharpness
5 Contrast
5 Brightness
EV -0.3
WDR on

Ensure you lower the sharpness to 0 unless using another lens


Caddx Turtle V2 is NOT ALWAYS SHIPPED WITH THE LATEST FIRMWARE 😱😱 The latest firmware is AMAZING 😱😱
(Note: How to repair a bricked Caddx Turtle with black screen)

How to repair a bricked Caddx Turtle from a firmware update
http://www.multirotorguide.com/guide...rmware-update/

September Firmware - works with v2 and soon to be tested with v1 board https://www.rcgroups.com/forums/show...5&d=1541439082

How to update Caddx Turtle firmware (step-by-step):
<https://www.youtube.com/watch?v=Sh9IAxRsw2E>.
LUNCHBOX FPV
Posted by GroundControlRC | Yesterday @ 09:40 AM | 626 Views
Review - RacerStar RS30A 30A Lite OPTO ESC



Here is a link to the Video:
https://www.youtube.com/watch?v=qTD5EWXcab0

These are fairly inexpensive 30A ESCs and the RacerStar Motors I have are great, so why not try some of their ESCs.
I have converted this ESC to a Non-OPTO ESC by installing a Micro SBEC (Switching Voltage Regulator) on this ESC.
This is the intial Review of this ESC.
I have already performed an initial review of this SBEC and a link to that video is listed below.
We will be Field Testing these components in our "Glue & Fly Series" F-22 Mini V2.

Here is a link to this ESC:

Racerstar RS30A Lite 30A Blheli_S BB1 2-4S Brushless ESC
https://www.banggood.com/Racerstar-R...47791920140372

Here is a link to this Micro SBEC:

HobbyKing Micro SBEC 5V/3A
https://hobbyking.com/en_us/micro-be...asc=3304856911

Build, Fly, Crash, Repair, Rinse & Repeat!

Happy Flying!


See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by lepiere | Yesterday @ 07:15 AM | 723 Views
Drone VISUO XS812 GPS - A GPS Drone UNDER 100$ (17 min 50 sec)


The new TIANQU VISUO XS812 GPS drone is the upgrade of the lucky Visuo XS809HW: by adding a double GPS/GLONASS Tianqu has made the perfect gps drone under 100$

Buy it here from TOMTOP:
Visuo XS812 1 battery version: https://goo.gl/qjcu4T
Visuo XS812 3 battery version: https://goo.gl/HpGzGX (best deal)

Very stable and with many features like follow me, orbit mode and waypoint on google map. Two version are available on the market with 2MP and 5MP camera that could result on good footage.

While the radiocontroller works on 2.4ghz frequency, Wifi FPV works on 5GHZ frequency so, before buying it, be sure that your smartphone support the 5G wifi network.

This is a very good gps drone under 100$ hoping that Tianqu, after this Visuo xs812 that is equipped with brushed motors, will deploy a new and better Visuo maybe with brushless motors.


Specifications:
Item brand: VISUO
Item name: XS812 GPS FPV Drone
Remote controller: 2.4G 4CH
Color: Black
Camera: 5G 720P
Control distance: about 200m
5G Wifi Trans-distance: about 200m
Drone battery: 3.7V 1800mAh lipo battery
Flying time: about 14mins
Charging time: About 180mins
Remote controller battery: 4 * AAA battery(not included)
Quadcopter size: 182 * 146 * 60mm (Folded)
330 * 330 * 60mm (Unfolded)

#VISUO #XS812 #GPSDRONE

What I'm using for my videos:

Camera

Iphone 7
On board camera: http://amzn.to/2nfb6mD
Action camera: http://shrsl.com/r3h2

Microphone: http://amzn.to/2n8Qflw
Lights: http://amzn.to/2GieqFV

Tripod: http://amzn.to/2E7Swoc
https://amzn.to/2EQYMVv

Gimbal: https://goo.gl/mnZZC5
Adapter Plate for action camera: https://goo.gl/cKe6MM

Action Cam Accessories: http://amzn.to/2nbPp6E

Dronelander on Social:

Facebook: https://goo.gl/FQPAhZ
BIG DEALS - Ask for Coupon: https://goo.gl/ffmHdK
Twitter: https://goo.gl/YHaQyM
DRONELANDER Blog: http://goo.gl/pcjnm6
DRONELANDER STYLE: https://goo.gl/tJRAhy
Posted by PittSpecial | Yesterday @ 06:12 AM | 755 Views
Guys,

After several months, perhaps one solid year, I finally convinced my buddy to let me help him with his 2nd GEN pico Tiger Moth that he bought on-line when these were still available.

It is interesting that at times we get distracted or just too busy with Life's other demands and we happen to miss things that make Electric Flight not possible after selecting one's Power System.

Fortunately, my buddy selected a budget CD type Brushless Bell type of motor and most importantly the E-Flite 10-AMP ESC that has programming instructions up On-Line and so, I downloaded the manual for the ESC from:

https://www.horizonhobby.com/pdf/EFLA1010_manual.pdf


First off, the Orange Receiver he was using was found to be defective because there was no movement from the servos whatsoever and I made sure that polarity hook-ups of the wires were okay. The motor was being armed but, it was obvious that the motor's "TIMING" was OFF from specifications and ESC re-programming was required.

Took OUT that Orange Receiver and placed one Spektrum AR8000 + Sat receiver and BOOM, the servos began to work! However, Motor was not working well still so,......

Turn everything OFF and went into programming mode and used the instructions within the Horizon Hobby E-Flite 10-AMP ESC manual and wrote down what I had to do to bring ALL parameters within the required settings so, things work and sure enough the motor started to work perfectly.

Items that were brought back to limits were having the correct Voltage Cut-Off for 2S (2-Cell Lithium Polymer) battery use and of course the Motor Timing for higher Pole (Outrunner) type of motor selection.

I can't say enough that Brushless ESC's need to be checked and re-checked for Proper Programming when you finalize your Selection of Motor type and use of how many Cells you are going to use with the final power system selection.

A few pictures of my madness............