Comments (45)
Add Comment
-
Views: 334
Plans taped down to cork building board and covered with cellophane food wrap -
Views: 348
1/8 x 1/4 sticks pinned and place and butt glue with carpenters glue (Aliphatic glue) -
Views: 335
Foam Part 3 and 4 glued to sticks and fwd 1/8 x 1/4 stick added. -
Views: 344
Remainder of foam parts glued to adjoining sticks or foam left to dry well!
-
Views: 554
Standford-Tucks May 1940 aircraft. Note the half black half white wings. The remainder of lower surfaces were either bare metal or silver dope. -
Views: 571
True scale size tail marked. Note, I have already "primed" the model with Rustoleum Auto primer -
Views: 499
Tail cut-down -
Views: 503
Tail cut down -
Views: 513
Make middle of LE and TE of foam as a guide to reshape airfoil -
Views: 530
Mark the approximate "high point" on the top and bottom surface to guide sanding. -
Views: 502
Tail resized and reshaped. -
Views: 540
-
Views: 782
Dive brake fabricated and installed -
Views: 771
servo installed, dive brake stowed -
Views: 713
dive brake fully deflected. (90deg) -
Views: 712
new hinges for more scale-like motion RH wing -
Views: 672
LH wing showing new hinges and new pocket for OWP bomb rack -
Views: 711
close up of new hinges -
Views: 664
aileron horn relocated -
Views: 711
HS-55 and EFlite S-75 are identical (mechanically) servos. You can even swap gear trains! They have a great feature that they rotate opposite one another! here they are at neutral