Archive for April, 2015
Test fly today for Otto: funtastic.... 
The wind was not a problem !
Wing span: 60 cm both wings
Wing area: 24 dm²
Weight: 350 grs rtf
Wing loading: 14 grs/dm²
Turnigy D2822/14 1450 kv (48 grs with backplate and propmount)
8/4,3 prop for quadcopters (stronger than GWS)
3 s 800 lipo
20 A esc
17 A at full throttle = around 180 W but nearly never used
6 grs servos
The wind was not a problem ! Wing span: 60 cm both wings
Wing area: 24 dm²
Weight: 350 grs rtf
Wing loading: 14 grs/dm²
Turnigy D2822/14 1450 kv (48 grs with backplate and propmount)
8/4,3 prop for quadcopters (stronger than GWS)
3 s 800 lipo
20 A esc
17 A at full throttle = around 180 W but nearly never used
6 grs servos
| 2015 04 12 Otto (1 min 7 sec) |
Comments (0)
Add Comment
-
Views: 598
My Otto at least got a cowl... -
Views: 628
Otto is ready for Dogfight..... My dog isn't... -
Views: 667
Final result.. See the following step by step pictures to build your own -
Views: 759
Thick cardboard templates -
Views: 777
If necessary adjust the templates in order to have stab and both wings incidences at zero degrees -
Views: 761
All pîeces from 6 mm depron. Ready for assembly... around 60 minutes from start -
Views: 768
My taylor made angled ruler to cut the 10 degrees bevels along the wing halves -
Views: 827
Glue and palet strapping. This one from a kind of "fiberglass" is fantastic
