PittSpecial's blog View Details
Archive for May, 2014
Posted by PittSpecial | May 21, 2014 @ 10:37 PM | 8,401 Views
Hi guys,

Just so you all know, no job is perfect and when I was doing my DIY job for the lower Control Arms on my mother's 1996 Toyota Corolla DX with the 1.8 Liter with Automatic / Overdrive, one bolt was grabbed and attempted to be inserted where it DID NOT BELONG!

Here is the Link to the Lower Control Arms Replacement in case you have not read up on it:
http://www.toyotanation.com/forum/13...ml#post7140418


Anyway, it took about 5 days until I was able to go and search for the Bolts at the Lower Bracket where one of the Bolts got stuck (threads damaged) as this Bolt just didn't want to tightened nor come out!

The Dealer tried to be helpful but, it seemed like an endless communication problem with me since all they wanted to show me was a nice cute diagram showing how the Lower Control Arm is assembled and not the bolts that go through "a" bracket and into the Bottom front end of the FRAME.

I finally had to resort and visiting the Salvage Yard (A very large one and super modern with Computer inventory) and found at least 7 different Corollas that fit the year I was looking for.

At the Professional Tire & RIM Shop they were experts in doing the job that I was looking for!

The entire cost was $80.78 including Tax (About one hour Labor) and I supplied the Bolts.

A few pictures!
Posted by PittSpecial | May 13, 2014 @ 09:52 AM | 7,273 Views
Pay attention, this will save many lots of $$$:hi:

I took the Rectangular with Oval corners Molding, the Rear Console Assembly between the seats, and I took out four small screws holding the Shifter Pod Assembly in order to slightly lift it in order to reach the Blub in its socket wire.

Using a pair of medical clamps, I reached in and took out the Light assembly and it is a tiny Bulb and heading out to the local Dealer as they have just one in stock for $2.45 plus tax. Certainly, I could have bought it from a local Surplus Electronics Store but, since this is such a Pain in the Rear to get to, I figured to buy Toyota Bulb to be on the safe side.:thumbsup:

Speaking of DEALERS, one such dealer on the East Central Coast of Florida (Not going to mention any names) gave me an estimate of $178.00 to replace this Bulb and reason why my poor mother has used tiny LED Flash Lights to double check which Gear she was in before letting go of the Brake.

A couple of pictures to show you how it is done.





...Continue Reading
Posted by PittSpecial | May 07, 2014 @ 06:37 AM | 7,233 Views
1992 Toyota Camry XLE with 451,000+ Miles without an Engine Rebuilt Job!!

Took this Short Video clip of my Camry's 5S-FE Engine Purring like a kitty cat during a recent A/C Recharge and after 451,000+ miles.

For additional data:
https://www.rcgroups.com/forums/show....php?t=2127766



1992 Toyota Camry XLE with 451,000 + miles! (0 min 38 sec)