Jyester's blog View Details
Archive for April, 2019
Posted by Jyester | Apr 26, 2019 @ 09:54 AM | 921 Views
Hello all i recently upgraded my DYS xdr220 with a HGLRC f4proV6 aio board. The old board was a dinosaur compared to whats on the market today. I didnt want to break the bank or buy something that had a bunch of features i was not going to use.
The HGLRC f4proV6 board is a aio(all in one) meaning it has current sensor, filtered cam/vtx for best possible picture clearness. The board is 6S capable and will except up too 200A, thats a big wow!! The board out of the package came with antenna connector or extension, buzzer, and a cap which needs to be soldered on. The board layout is very easy to follow as it has two ports for wiring in your Rx a no brainer, and lights and buzzer if you want lights, the buzzer is a must. The vtx is integrated into the board and all you need to do is solder your camera's wires to the board and your in business. Soldering the esc's to the board is also a no brainer and i like the fact that you can solder the negativer or ground wires together on the same pad, as there is a single pad for the signal wire. It only took me 15 minutes to solder all wires to the board as they were already in place from when i removed the main dys aio board that came with the 220. I had to drill a hole in the top back of the canopy for the antenna extension cable to be mounted and it came out clean. I needed about 8 small nylon stand offs to mount the board to the frame and also to raise the canopy a little as i wanted plenty of air to flow over the board. I need to...Continue Reading