Posted by old4570 | Apr 18, 2019 @ 12:18 AM | 1,793 Views

Sent for review by

Motor ESC install

I had some alternative ESC's to chose from in the 10A to 12A range ..
Chosen was the MR RC 12A ESC , since it already had a connector on it .
Yes , the plan is to run a 2s battery with the 5x3x3 prop ..

With the ESC soldered up , I did a quick current check and the combo pulled some 5.5 amp ..

A) Motor pod .. I was very easily able to open it up .. This allowed me to tighten the motor mount screws .
I then proceeded to hotglue the motor mount into the pod and hot glue the pod shut .

B) Since I was playing with the hot glue , I hot glued the pod onto the wing ..
No issues here , and the wing fits to the fuse just fine .

C) The 12A ESC was zip tied to the wing and the cables routed through the hole to the inside of the wing .
The ESC should get plenty of air where it is . Seems to be a very neat install .

D) At this time I do not plan to run 3s , just in case anyone was wondering .

E) Next I need to watch some TV , give my back a rest .. Then I will solder up the Rx ...
This one from BG , simply my Fav 4ch Rx right now ...

Part 3 - Install the Rx ...Continue Reading
Posted by Unegawahya | Apr 17, 2019 @ 11:22 PM | 1,168 Views
I know it’s not going to be an R/C, but it’s going to be a blast to build! First set of pictures of my 1/76 scale U.S.S. Constitution project.
I’m modifying the original kit so that it can include a full rigged “if I can” gun deck....Continue Reading
Posted by zoltansgarage | Apr 17, 2019 @ 11:08 PM | 1,028 Views
Laying down silicone over smooth set 20 material, carved out as a buck.
Posted by old4570 | Apr 17, 2019 @ 07:53 PM | 1,889 Views

Mini Surfer 800 sent for review by

AF Link - ... to product page

The opening bout weigh in

I thought it might be interesting to weight the mini surfer to see what sort of weights we are dealing with .

Fuselage = 50.4 grams
Tail ( Ele / Rud ) = 12 grams
Wing = 82 grams
Motor Pod ( Motor / ESC / POD ) = 71.4 grams

All those were individually weighed for a total off = 215.8 grams
Now if I assemble the fuse / wing / tail I get 144 grams and adding the pod returns some 212.5 grams ...
Yeah , that's a few grams Variance there .

I am really impressed with the weigh in less the motor / pod / esc .... Hmmmm , 71.4 grams is a little weighty ..
Even the wing @ 82 grams is a little sturdy ..

My first impressions are that the Mini 800 is well moulded and all the parts fit well together .
I dont think I can bring it in under 250 grams flying weight ..
There would be some serious dieting required to meet the new Libnazi RC rules that will be shoved down Australians throat's shortly .
Oh , for all those Australians , don't forget NOT to vote for the people that want to kill your hobby ! ( )

The Mini 800 just arrived , and the first thing I am going to do is run up the motor / ESC / prop combo as it came in the kit to see what sort of power / current / thrust we are looking at ...


3s / 5x5 prop ( included ) / 15.7 Amp ( peak ) recorded .. Average is in...Continue Reading
Posted by CGordon | Apr 17, 2019 @ 07:07 PM | 1,089 Views
I wanted to try a darker hardwood and much thinner balsa than the last experiment. This time it is 1/16" balsa with teak veneer. The strips were glued with yellow glue and pressed overnight to dry. The teak was surfaced down to just a few thousandths on each side.

Next, a strength/weight test. I cut a very narrow strip and a wider strip of balsa of about the same weight. The balsa was slightly heavier and slightly stiffer, but I'd say these were fairly matched. No question that the teak was doing the work of carrying the tension and compression loads nicely.

There's probably a geometry of teak/balsa which exceeds plain balsa, but hard to optimize at this tiny scale.

I love the look of teak and I could create a slab fuselage with this technique that would look really cool. Tail pieces too. And I've proven I can do this without a weight penalty (especially if factoring in a lack of covering material).

As always, fun experiments with little need to have a practical application.
Posted by GMundo | Apr 17, 2019 @ 07:05 PM | 907 Views
Hi friends
Need help. I bought on line a royal product Cessna citation 500 but it has no building instructions and I am unable to find it anywhere. Can any one direct me to where I may find this manual.
Thank you
Posted by Captain Canardly | Apr 17, 2019 @ 06:47 PM | 4,735 Views
My best friend, Bill Kubiak, had given me his blueprint collection (which didn't get to the fire place) of which I have started scanning, and I'm not to favorable of Office Depot, as there isn't but 1 person who knows what (she) is doing out of 12+ employees! There's nuthin worse than a 36" wide being (reprinted) on a 24" paper! Anyway, send me PM's for requests, as I have lots of space for messages, and all the PDF's are high res, wayyy above the RCG limits! No more werds, just some views! - Ohh yeah- a few of these will be 'reworked' in CAD for the 'foil factor', and a lot of these could be scalable. ...Continue Reading
Posted by Mad_angler1 | Apr 17, 2019 @ 05:01 PM | 27,504 Views
Over the last 2 months I have been testing and playing with the Herelink system from ProfiCNC thank to the guys over a who have been able to get me one to take a look at.

My main thread on this product Is below as well

Over the last few weeks I wanted to look a range and how this system would perform, Herelink is stated to have a range of 20km and I wanted to put this to the test, as laws prevent me from flying this in the UK I came up with a number of tests over some coast line to see what the system was capable of doing.

The plan was to set the Air unit up on a cliff mounted to a tripod and a camera, I also mounted a full cube system to it as well to be able to get full telemetry and test the FC control over the distance as well.

For the first test I found an area with a clear 10km 6m stretch up the coast line, I placed the Air end on the cliff about 25-30m above seal level and the plan was to stop a verbose points up the coast as I traveled along.

...Continue Reading
Posted by GroundControlRC | Apr 17, 2019 @ 04:10 PM | 1,474 Views
Project - "Glue & Fly Series" Nano Backyard/Indoor Plane Status #3 - Maiden Launch

Here is a link to the Video:
Project - "Glue & Fly Series" Nano Backyard/Indoor Plane Status #3 - Maiden Launch (9 min 14 sec)

OK, I decided to take on this side project as I have wanted an Nano/Micro Backyard/Indoor Plane for quite some time and I wanted to be sure it could carry a Micro FPV System so I decided to try and design one myself ;-)

This is Ground Zero, my Prototype of what I envision for this Plane.
It's much smaller that I had in mind so I think some upward scaling will be in order ;-)
I added 13mm to the trailing edge of the main wings which also gave me an additional 5mm of aileron control surface.
I also added 1mmx3mm carbon spars to the main wings to stiffen them up.
The AUW for this plane is now at 32.5 grams.
It's time for the Maiden Launch to see where we are and what we can learn.

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook
Posted by Krashcan | Apr 17, 2019 @ 04:05 PM | 960 Views
Posted by gooniac33 | Apr 17, 2019 @ 11:30 AM | 1,303 Views
Here are some flights from over the last couple weeks. I did some buddy boxing with some younger RC pilots and also did a maiden for someone at my club. Its always fun to help out others! Gotta do what is required to get as many people hooked to this hobby as possible!

Bobcat pusher plane maidened at LFE (6 min 48 sec)

80mm FMS Hawk Buddy Box flight with Jack at LFE (6 min 31 sec)
...Continue Reading
Posted by Micubano | Apr 17, 2019 @ 08:21 AM | 2,613 Views
Technically I never stopped flying. This winter was pretty tame. It just feels good to pack the car up in the morning to immediately hit the field after work.

Edit: Apparently it is an orange plane day.
Posted by scousethief | Apr 17, 2019 @ 06:53 AM | 8,632 Views LINK

Rewriting the review as something happened in the original upload

The WIFI enabled FPV camera is mounted on the drone, to broadcast the live video to the pilot on the ground.
2K Wide-angle Camera
This 2K HD wide-angle camera helps make more attractive and better recordings and clearer pictures,also with Gesture Taking Photo function.
Optical Flow Positioning
The drone will automatically recognize objects of various sizes, and can dynmaically adjust the tracking parameters according tot eh type and speed of the object, making it easier to follow.
Smart Follow
H2 will automatically recognize objects of various sizes, and can dynamically adjust the tracking parameters according to the type and speed of the object, making it easier to follow.
Set-circle Fly
Press the one key set-circle button, the drone will fly 360°around the controller.
One Key Fly Away
H2 can make the drone fly backwards at the same time with one key fly away function, and shoot perfect visual video,so that you can easily experience the popular shooting mode, everything is as simple as this.
Flight Path
With the flight path multi-point route control technology, as long as a path is drawn on the real-time camera screen, the drone will fly at the current altitude along the designated route.
Battery Monitoring Fuction
Our intelligent algorithm can accurately calculate the battery capacity of H2,allowing users to view the remaining fly time in real time.

I...Continue Reading
Posted by Tazkiller85 | Apr 17, 2019 @ 05:14 AM | 1,071 Views
Yep Les Amis,
La lampe de chevet volante !!! lol . Je test aujourd'hui un petit engin destiné aux plus jeunes, le NEON U51 de chez Potensic.
Rigolo, Original, mignon et simple à utilisé, dette petite veilleuse volante fonctionne plutôt pas mal. Le plus fun c'est bien sur de le piloter dans la pénombre mais je dois avouer que malgré sa simplicité, il est stable et se controle bien. En bref, un petit gadget sympathique .. Bon vol et bonne chance à tous .

Néon U51 Potensic - Review Test Démo - Et bien plus encore ... (19 min 44 sec)

NOTATAZ : 15/20 Simple, pour les plus jeunes !

Niveau : Débutants et Enfants
Les + : Lumineux, Solide, Simple d'utilisation, Bonne autonomie .
Les - : Batterie interne...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- NEON U51 ( Coupon de 20% YIATFS83 ) :
- Eachine E019 (AliExpress) :
- E61H 20% de remise avec ce coupon LDH33QG2 :

Concours du 17 au 24 Avril 2019
- Résultat du tirage au sort dans la vidéo du 27.
- Une participation par personne
- Liker la vidéo
- Mettez en commentaires "Je participe pour le drone ... " (un des trois proposés )

Bientôt en Vidéo :
- Asteroid Hobbymate :
- AKK Diversity RX :
- AKK FX2 Dominator VTX :
- DIGOO Alarme de maison : https://goo....Continue Reading
Posted by Mugin UAV | Apr 17, 2019 @ 04:06 AM | 947 Views

Here comes the new Mugin-4 Pro 4000mm H Tail Full Carbon Fiber VTOL UAV Platform. It is a shell but with infinite possibilities.


Wingspan: 4000mm
Length: 1900mm
Wing Area: 90dm2
Payload Bay: 560mm x 210mm x 185mm

Weight and Payload
Empty Weight: 8.26kg
Empty Weight with ARF Package: 17.6kg
Maximum Take-off Weight: 25kg
Payload Capacity: 6kg

We are always listening to what our customers say, and make the improvements accordingly to meet what our customers needs. The Mugin-4 Pro 4000mm is designed based on the Mugin-2 Pro 2930mm. With the same fuselage, but the winspan has been enlarged from 2930mm to 4000mm. The longer winspan means the cruise speed will be reduced, and the flight time will be increased.

The same to Mugin-2 Pro 2930mm, the new Mugin-4 Pro 4000mm is made with full carbon fiber. Much stronger and durable than the fiberglass versions.. This UAV platform is made in mold to make sure the replacement parts are the same.

Mugin Pro are the aircrafts with the vertical take-off and landing (VTOL) function that can hover, take off, and land vertically. No runway needed and much easier to save crash comparing to the standard fixed wings.
Posted by RushVTX | Apr 17, 2019 @ 02:19 AM | 1,006 Views
United States:
Ready Made RC:
Excel Drones:
Mini Quad Test Bench:

Rotor Village:





South Africa:
Flying Robot:
RC Edge:

Posted by VicT | Apr 16, 2019 @ 10:48 PM | 1,928 Views
Today was a perfect weather day that started out (April 16, 2019) with cool temps (60F) but warmed up to about 75 by noon. Winds diminished to about 5 mph and no clouds. Lift was light but just enough for the Heron. I used the Lithium Ion (LiIO) charge setting on my $110 Hitech “Black” 2 pack charger. This puts about 90 percent into the Lipo 2200 3S 45 C pack and does not over charge the pack. On the first flight I flew for about 25 minutes using about 1.5 minutes of full power climbs. I only go full throttle for about 15 seconds each so this was about 4 or 5 climbs. After landing I had 55% remaining on the pack. I adjusted one flap and launched again into light but steady lift every where. After climbing to about 1000 feet and turning off SAFE Self Level I did about 1 minute of aerobatics with aileron rolls and loops. Max dive speed with SAFE on is limited to about 60-70 mph because the gyros limit dive angle to about 40 degrees. No wing flutter or flex was observed from the foam wings with aluminum wing spars. Energy retention is not like heavier fiberglass designs but is fun anyway. The full flaps and crow with full down elevator stick provides a nice 40 degree slow dive to a round out and flare right in front of you. The single wheel protects the belly and allows for friction free rollouts that are about 30 feet long . There is not friction on the wheel but if it had then this could provide for less rollout distance.

I am still learning...Continue Reading
Posted by RafaelSP | Apr 16, 2019 @ 10:43 PM | 825 Views
Hi everyone

I didn't find anywhere the pinout information to the Acbel SGA005.

I need tô addapt this Power Supply, but I don't know how to torn this on.

Following some pictures that may help.

Any help os welcome.

Posted by | Apr 16, 2019 @ 10:21 PM | 1,780 Views
Unfortunately it sounds like Kabab got shafted by happymodel on this one but for what it's worth I've written an article below analysing the components they have chosen and my thoughts on them in some detail.