Easy to use scale lighting set suitable for 30-60 size scale model helicopters and Aeroplanes.

http://www.myrcmart.com/aviation-pow...ne-p-3301.html

Directions for Use

* Fit the power lights in position suggested in the above diagrams by drilling holes in the fuselage and fixing the lights with 2 part epoxy. Extension leads are available for larger fuselages/wings. Fit the power light unit into your model away from vibration.
* There are two switches. One is for the operation of the lights and one is for the optional landing lights. Fit the switches so they are accessible from the outside of the model. Included in the unit are two spare plugs into which the optional landing lights can be fitted. The power for the lights can he from either a spare battery pack 4.8v to 9v or from your receiver pack.
* Although these lights use little power we suggest you always fit a battery monitor to your receiver and check the state of your battery before flight. Do not use the power lights if you have low battery power or if you are unsure of the state of your flight battery. Always program fail safe into your receiver.

Specification

* 2 x Red Beacon
* 2 x White strobe
* 1 x Red & Green Navigation Light

http://www.myrcmart.com/rcx-transmit...ck-p-3601.html

http://www.myrcmart.com/rcx-sg90-9g-...ue-p-3599.html

This Servo is also able to replace the following parts:

* Excellent low price for 450 Class Helicopters
* Walkera 4# Servo: HM-004-Z-26
* Walkera 36# Servo: HM-036-Z-41
* Walkera 37# Servo: HM-037-Z-38
* Walkera 68#B Servo:HM-68-B-Z-37
* ESky Servo: EK2-0500

Specification

* Weight: 9g
* Dimensions: 22.6 mmx 21.8mm x 11.4mm
* Operating Speed (4.8V no load) : 0.12sec / 60 degrees
* Stall Torque (4.8V): ~1.8 kg / cm
* Temperature Range: -30 to +60 Degree C
* Dead Band Width: 4usec
* Operation Voltage: 3.5 - 6Volts