Posted by aaronredbaron | Today @ 10:24 AM | 10 Views
I have been collecting kits and engines for many years, and while I love building I feel like my larger airplanes are less practical than I would like. I really enjoy small glow power models with tiny four strokes... I'm weird... so I'm looking at this shelf of engines and thinking about how I miss driving a 5 speed car... and I kind of had this hair brained idea I should sell the whole shelf and buy a beater.. something I can fix up and work on with my son. something with a 5 speed and rear wheel drive... dare I say all wheel drive?

I was heavily impacted by watching the drift bible when I was a teenager... if you have never watched it I feel like it made me a much safer driver as I've been able to handle sliding conditions in emergencies over the years where my car ended up drifting suddenly on ice. I have never crashed a car and I feel like mastering these skills are a zen like experience akin to flying helicopters and building with balsawood...

The Drift Bible (How to drift for starters/pro's) with the Drift King (FULL HQ) (1 hr 9 min 25 sec)


I miss having a 5 speed.. I feel kinda gutted not having a 5 speed. I got to drive perhaps the zenith of manual car technology this summer... my friend let me drive his 1991 Acura NSX with a supercharger and numerous other performance upgrades... holy moly! the connected, visceral feel of that mid engine v6 with the screaming supercharger, no power steering, stability control, just 3 pedals and pure bliss...

...Continue Reading
Posted by DutchRC | Today @ 09:14 AM | 32 Views
Yes! It is allmost unbelievable but here is yet another FPV camera test from me
And what?? It's not even a DJI HD Super Plus Extra :O :O
Nope.. simply a racing FPV cam from Foxeer..

Link to the bigger one: Foxeer Predator 4 Mini

The smaller one: Foxeer Predator 4 micro

Foxeer Predator 4 Mini and Micro - Low Latency FPV Cam's - FULL REVIEW! (22 min 55 sec)


Specifications:
sensor type: CMOS
sensor size: 1/2.7"
resolution: 1000tvl
lens: 2.5mm M12 or 1.8mm M12 (M8 for the micro version)
field of view: 170 degrees at 16:9 - 140 degres at 4:3
aspect ratio: 4:3 or 16:9 switchable
input voltage: 5 - 40 V
latency: 4 ms
size: mini - 21.8x 21.8 x 14.2 mm
weight mini: ?
size: micro - 19 x 19 x 18.6 mm
weight micro: 6.1 g
setup OSD: yes
runtime OSD: yes
Wide Dynamic Range: yes, Super WDR
Posted by Tazkiller85 | Today @ 05:00 AM | 71 Views
Yep Les Amis,
Plus de 500€ de CADEAUX !!! Que dire de plus ? à part ... MERCI !
Je vous avais promis un concours sympa pour ce mois d'Août 2019 et bien c'est maintenant. Encore une fois pour vous remercier de votre aide depuis ces deux ans passés, toujours fidèles et respectueux de mon travail, vous avez su m’encourager et me soutenir ... Je vous souhaite à Tous BONNE CHANCE ...

CONCOURS DJI et RESULTATS Lipo Bag - 10 Gagnants - Presque 20 000 !!! (17 min 27 sec)


Règlement Concours du 17/08 au 23/08 12h00 :
- Être abonné à la chaîne bien sur
- 1 participation par personne
- Liker la vidéo
- Répondre à la question posée en commentaire
- Tirage au sort (3 gagnants) le 24/08 en vidéo .

- Si Vous voulez aider la chaîne avec un don pour plus de contenu et plus de concours : https://streamlabs.com/Tazkiller85

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- LIPO BAG (COUPON LIPOSAFE 19% ) : https://amzn.to/2yRHrpK
- ZLRC SG906 BEAST : http://bit.ly/2Z9s8aI
- JD 20S : http://bit.ly/2ZdrODv

- TOUTES LES PROMOS ET COUPONS BANGGOOD 2019 (remis à jour régulièrement, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://bit.ly/2ErrkCr

BIENTÔT EN TEST :
- Eachine Cinecan 85 HD : http://bit.ly/2yLzceN
- Jumper T8SG V2.0 Plus Carbon : http://bit.ly/33eUJui
- TinyHawk S (COUPON HTTHKY ) : http://bit.ly/30VpSRk
- Frame Mr Croc FLYWOO : http://bit.ly/...Continue Reading
Posted by Ling08 | Today @ 03:51 AM | 79 Views
Item name: FD1103 8000KV / 10000KV Brushless Motor
Motor: 8000KV/ 10000KV
Stator Diameter:11mm
Stator Thickness:3mm
No.of Stator Arms:9S
No.of Rotor poles:12P
Motor Resistance:330mΩ
Max Continuous Current:5.46A
No.of Cells(Lipo):2-3S
ESC:6A
Recommended Prop(inch):2.5 Inch
Wire type:28AWG x 40mm
Weight:4g
Posted by SSM | Today @ 12:47 AM | 98 Views
Another Beaut Winter's Morning!
.
.
.
.

"Flying" - for Rod (3 min 42 sec)

Posted by old4570 | Yesterday @ 10:13 PM | 125 Views
450x @ the Football field (3 min 14 sec)


These little wings fly amazingly well ..
I have to say I am surprised ..
Just needed more power ..

Still tending to pull up , so more trimming needed .

Flies nice , turns nice , glides nice .
Weighs less than a box of tissues and is not overly expensive .
Battery was not fully charged , so flight is a little shorter .


450x Flying wing (+) WLtoys 949 flight board (+) 8520 /
Posted by Ling08 | Yesterday @ 09:31 PM | 125 Views
Come on...guys...
Posted by Tristar7737 | Yesterday @ 02:51 PM | 222 Views
Did my first solo on Aug 10th thanks to Dave and Bob, two out of town flyers who happened to be at my field and where nice enough to give me some pointers. Dave co piloted with me for a few flights after Ben, our local "trainer" let me take the club trainer up the previous weekend.

After I had Dan take up the plane and trim it out, I landed it after I few it under his supervision. The first sideways bounce began to tear apart the undercarriage. Did modifications using 1/8 music wire to replace front strut utilizing the front float mount slot and a coat hanger to provide back support attached to the rear float mount. Used wire and solder to attach front of coat hanger to front struts and then used nitro fuel tubing to act as shock absorber between front struts.

My first task is to practice touch and go's so I can get over being so paranoid of landing, particularly in the wind. Most of my flying has been in 10 mph with a Timber 1.5m foamy arf.

4-5th flight
Crash 1
- Cartwheel (Minor slow speed) - disoriented as to where the end of the runway was making a N. bound approach, plane does a cartwheel before the end of the runway due to stalling about 3-4' off the ground.
Repairs - Landing gear had to be straightened.

Analysis - better to land smoothly in the grass off the field than to push getting onto the runway, better for the plane and my nerves. New gear holding up well.

8th flight
Crash #2
- Nose Plant (unknown - likely moderate speed and attitude )...Continue Reading
Posted by TMacFPV | Yesterday @ 02:49 PM | 192 Views
Your best fly spot for FPV Fun?🤩
Where can you fly your FPV Race Drone both legally and safely? 🤔
There are a few apps out there which can help you answer this question. Today we look at one of them, the FAA B4UFLY App. Use it or Airmap to find your best spot for FPV Fun!
FAA B4UFLY APP (5 min 46 sec)

Posted by Bill M - RC | Yesterday @ 07:10 AM | 270 Views
Hi fellow rc pilots & rc enthusiasts

Hawkeye Firefly Split review. This Hawkeye Firefly Split 4K 12MP Single Board HD Recording DVR WDR FPV MINI Camera For FPV Racing RC Drone review includes unboxing, inspection, setup, firmware upgrade, accessories and tests. The 4K [email protected] video is not included in this but a link to watch this is included at the end and also in this video description.

You can get this Hawkeye Firefly Split 4K 12MP Single Board HD Recording DVR WDR FPV MINI Camera For FPV Racing RC Drone here: http://bit.ly/2Mhr9yZ
DISCOUNT COUPON CODE: 3EQWMNCC


Hawkeye Firefly Split 4K DVR WDR FPV Mini Camera review (13 min 31 sec)

Posted by nagas | Yesterday @ 05:47 AM | 300 Views
Based on a glider airframe, the Messerschmitt Me 163 Komet was a German rocket-powered interceptor aircraft. Designed by Alexander Lippisch, it is the only rocket-powered fighter aircraft ever to have been operational and the first piloted aircraft of any type to exceed 1000 km/h (621 mph) in level flight.

Over 300 Komets were built, but the aircraft proved lacklustre as an interceptor it only destroyed between 9 and 18 Allied aircraft against 10 losses. Aside from combat losses many pilots were killed during testing and training (Wikipedia).

To reduce weight, a pair of front wheels were attached to a dolly that would be ejected after takeoff. Once the Komet had run out of rocket fuel after the attack, it would glide back to base at high speed and land on a skid.

Flaps were introduced on the production model (B) in an attempt to reduce speed prior to touchdown.

The Phoenix version is based on a SketchUp model that seems no longer available.

The model an be downloaded here.

Me 163 Komet (comet) Luftwaffe rocket fighter (6 min 30 sec)

Posted by rclad | Yesterday @ 12:52 AM | 386 Views
We finally had beautiful weather for an IMAC contest last weekend, my fifth one of the year. Read more on the Cincinnati IMAC Burnit Challenge, and the results, here.

Below is Ben Batts flying freestyle after the contest on Sunday, August 11, with one eye closed!

Cincinnati IMAC Burnit Challenge Freestyle Show 20190811 (3 min 57 sec)


Cincinnati IMAC Burnit Challenge Freestyle Show Part 2 20190811 (1 min 52 sec)
...Continue Reading
Posted by wattechighland | Yesterday @ 12:30 AM | 342 Views
WTC(water tight compartment)with profile hull

まるゆ(仮2)、口紅バラストでプロフィール潜水艇 (3 min 23 sec)

Posted by UnknownForces RC | Aug 15, 2019 @ 10:48 PM | 349 Views
UFRC 4WD REAR AXLE TRUCK (0 min 23 sec)


The axle effection of 4WD REAR AXLE TRUCK is very small.
Posted by Qwinout | Aug 15, 2019 @ 09:36 PM | 351 Views
Diatone GTB 329 Cube 2S / 339 Cube 3S 3 inch Toothpick 120mm FPV Racing Drone Quadcopter PNP with MAMBA F411NANO MB1103 6500KV 5500KV Motor
https://qwinout.com/products/diatone...58cd60e3&_ss=r
Specification:
Brand name: Diatone
Item name: DIATONE GTB 329/339
Paddle size 3 inch
Rated voltage 2S / 3S
Wheelbase 120 mm
Weight 45 g
Model configuration
Camera: RUNCAM NONA2
Antenna: Copper pipe antenna
Image: TBS UNIFY PRO32 NANO
Flight Control: MAMBA F411NANO
ESC: MAMBA 124 /12A 4S Dshot 600 Motor: MAMBA Racing MB1103 6500KV/5500KV
This kit does not include a receiver, remote control, and battery
Posted by Qwinout | Aug 15, 2019 @ 09:31 PM | 366 Views
Happymodel Crazybee F4 PRO V3.0 Flight Controller Blheli_S 10A 2-4S Brushless ESC compatible Frsky/ Flysky Receiver for Cinecan 4K Racing Drone
https://qwinout.com/products/happymo...k-racing-drone

Can fit for Mobula7 Mobula7 HD Larva X FPV Racing Drones


(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
SPI BUS receiver
Protocol: AFHDS and...Continue Reading
Posted by Hypo289 | Aug 15, 2019 @ 02:40 PM | 419 Views
Hi everybody I’m new here and hope I’m doing this right, I’m looking for some help on finding the instructions and plans for a Top Flite P-51B yellow box, if anyone has a copy of this they would like to sale or make a copy to sale I would really appreciate it, bought a kit off of eBay to find out it’s missing these crucial items, can anybody tell me how this kit flies, any heads up that will make any improvements, thanks for your time. Michael
Posted by Capt jk | Aug 15, 2019 @ 12:43 PM | 454 Views
Hi all,
I am having difficulty getting this build blog going. It seems like I have a lot of views, but absolutely no responses from any of you. It defeats the purpose of a blog for me as I am looking forward to interaction. There seems to be a problem at RC Groups as it appears as if nobody is able to respond. I need help from someone to contact RC Groups and let them know.

Check out my build progress below...