Posted by nsg | Today @ 12:10 PM | 33 Views
EF Laser 60"
MotrolFly 4315 custom wound to 370 kV
Castle HV60
2x4s2600 mah
servo battery 2s800, regulated via Castle BEC

Approximately 1700 wt top, settles at 1500-1600

3DHS original Slick 70
Hyperon Z4035-299, 299 kV
Castle ICE 100
Xoar 18x10
Life 2s800 mah direct
2x4s3300

Approximately 2kwt top

3DHS original Velox 68" (todo)
Hyperion ZS

3DHS Vyper 65" (todo)
MotrolFly 4315-300
Posted by YO_VLOGS | Today @ 11:43 AM | 58 Views
HSP Nitro 2 speed Runaway and Crash (9 min 7 sec)



this happens to me last weekend due to loose AA-size battery box avoid aa batteries and start using lipo battery for the nitro
Posted by GroundControlRC | Today @ 11:04 AM | 190 Views


Eachine Mini Mustang P51D Warbird RTF w/Gyro - Wind Surfing Session #3 - Wind 20.3mph (32.7kph) Oh Yeah!

Eachine Mini Mustang P51D Warbird RTF P51 P-51
https://www.banggood.com/custlink/vvmDAdvdjk

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

Here is a link to the Video:
https://www.youtube.com/watch?v=eV-wISvWSzs

I wanted to test this Mini P51D is as similar wind as I had testing the Volantex Sport Cub 500.
The Wind did not disappoint ;-)
Hang On! Launching ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Eachine Mini Mustang P51D Warbird RTF P51 P-51
https://www.banggood.com/custlink/vvmDAdvdjk

Here is a link to the Playlist for the Eachine Mini P51D Mustang:
https://www.youtube.com/playlist?lis...1gOQvKdyt4mn1s

Spare Parts:

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/3_7V-360mAh...47791920140372

Eachine 3.7V 380mah 25C Lipo **I use these in the Eachine Mini P51D Mustang with no problem
https://www.banggood.com/Eachine-3_7...47791920140372

JJRC H31 RC Quadcopter Spare Parts Battery 3.7V 400mah
https://www.banggood.com/JJRC-H31-RC...47791920140372

JJRC H31 RC Quadcopter Spare Parts 6Pcs 3.7V 400MAH 30C Battery and Charger Set X6A-A13
https://www.banggood.com/JJRC-H31-RC...47791920140372

5PCS 3.7V 300mAh Lipo Battery Set for H8 H22 Eachine H8 Mini RC Quadcopter
...Continue Reading
Posted by Justwingit | Today @ 10:54 AM | 203 Views
In today's "FRIDAY FLASHBACK" RC aerobatics legend Seth Arnold dials in a newly installed Aura 8 AFCS in George Valverde's gorgeous ESM Grumman F7F Tigercat at the Southeast Electric Flight Festival (SEFF) back in 2018 :
ESM F7F Tigercat - FRIDAY FLASHBACK! Seth Arnold dials in the Aura 8 AFCS; SEFF 2018 (5 min 58 sec)


Have a safe and happy Independence Day to all my Yank brethren !


Posted by 5546dug | Today @ 07:16 AM | 537 Views
My newest bird
Posted by mtdoramike | Today @ 07:15 AM | 557 Views
This is the latest build fresh off the bench. It's was a Artesania Latina kit of the Hellen, which is a discontinued kit. I went with a Caribbean fishing boat theme. I named her the Caribbean Dreamin BR549.
Posted by baranof | Today @ 03:07 AM | 624 Views
Im going to try to put photos in order of build
Posted by Helen_AGFrc | Yesterday @ 10:57 PM | 856 Views
#A73CHLW is the coreless waterproof servo, it has 32kg high torque. It is very affordable, but very good quality.

Feature

High performance standard digital servo

Built-in magnetic angular position sensor

Waterproof IP67

High precision steel gear

High quality coreless motor

High strength dual ball bearings

Full metal housing

Ideal for 1/10, 1/8 on road, off road, truck, plane, helicopter and engine etc



Specification

A73CHLW

Operating Voltage: 4.8-8.4V

Operating speed: 0.160sec/60 @ 6.0V

Operating speed: 0.145sec/60 @ 7.4V

Operating speed: 0.135sec/60 @ 8.4V

Stall Torque: 26 kg-cm (361.07oz-in) @ 6.0V

Stall Torque: 29 kg-cm (402.73 oz-in) @ 7.4V

Stall Torque: 32 kg-cm (444.40 oz-in) @ 8.4V

Gear: Steel

Motor: Coreless

Size: 40*20*37.5mm (1.57 x 0.78 x 1.47 in)

Weight: 73.5g

Connector Wire: JR 300 mm

For more info, please feel free to contact me at [email protected]
Posted by Helen_AGFrc | Yesterday @ 10:08 PM | 985 Views
If you are looking for the low profile servo for the RC Drifting Car, please you can check A50BHL.
It is the programmable brushless servo, it is very good quality and great performance.



Feature


High performance Low Profile digital servo
High precision steel gear
High quality Brushless motor
Dual ball bearing
Programmable
Aluminium top and middium part
Ideal for 1/10, 1/8 on road, off road, truck & plane



Specification


Item: A50BHL

Operating Voltage: 4.8-8.4 V

Operating speed: 0.095sec/60 @ 6.0V

Operating speed: 0.083sec/60 @ 7.4V

Operating speed: 0.073sec/60 @ 8.4V

Stall Torque: 16 kg-cm (222 oz-in) @ 6.0V

Stall Torque: 18 kg-cm (250 oz-in) @ 7.4V

Stall Torque: 19 kg-cm (264 oz-in) @ 8.4V

Gear: Steel

Motor: BLS

Size: 40.8*20.2*26.1mm (1.60 x 0.79 x 1.02 in)

Weight: 51g

Connector Wire: JR 180 mm

For more info ,please feel free to contact me at [email protected]...Continue Reading
Posted by ronwc | Yesterday @ 04:24 PM | 1,243 Views
Been on a roll building and flying lately, here are some of my new planes.
Posted by Jack Crossfire | Yesterday @ 03:12 PM | 1,393 Views
In the face of worn nylon straps, another phase of tire coatings began. Aquarium sealer was the absolute toughest adhesive lions ever saw. Vibram rubber showed similar wear to nylon. There was a trend with nylon where impregnating it with E6000 made it more robust. To save money, later nylon straps weren't impregnated with E6000, which may have made it wear out faster. Using 1" wide straps is definitely better.


The news last covered the Mars rover tire wear in 2019. After traveling 13 miles, it was much more beat up than lion tires after 100 miles. Lions can get hundreds of miles out of tires by frequently replacing nylon straps, but the idea is to reduce the manetenance.
Posted by DutchRC | Yesterday @ 11:10 AM | 2,020 Views
Halloa people,

part of a build series this ofcourse and I have wanted to do a build with a RacerX / Twig frame for a LONG time.. And then life happened
But here it is.. My first frame from RacerXfpv.. an American company in case you don't know them..

The frame in question: RacerXfpv ET5 frame kit

also available as BNF from BetaFPV: Twig 3, 4 & 5" at BetaFPV

So let us then have a close look at that frame

Ultra Light 5" Racer! Racer X fpv ET5 Twig - FRAME REVIEW (10 min 11 sec)



Specifications:
type: Ultra light racing
wheelbase: 200 mm
Left-to-Right: 140 mm
Front-to-Back: 140 mm
base thickness: 4 mm
weight: 48 grams
material(s): Carbon fiber + TPU prints
chamfered edges: yes
clean: 98 % clean
buzzer: nope
LED board: nope
battery strap: yes
battery anti-skid pad: yes
Posted by PittSpecial | Yesterday @ 09:53 AM | 2,088 Views
My Lord, it has been almost 10 long years and my Slow Stick-X using GWS Slow Stick Parts has survived!

I recently flew it about a week ago (during the weekend) at my RC Club using a HIMAX Inrunner Brushless with the HIMAX gearbox. The issue was I could not keep the propeller on the output gearbox shaft. Perhaps I needed one more additional washer and use sand paper on that Spur Gear Output shaft, nonetheless, I went back to basics as I wanted a power system that gave it respectable airspeed but, with LONG Flight Times.

Therefore, I came to a complete circle of sorts and found my original ASTRO FLIGHT mightly mirco 010 14-turn inrunner brushless and found a GWS EPS-300/350 gearbox and installed the GWS "B" Spur gear which makes 4.43:1 reduction.

Placed a GWS Slow Flyer (Orange Propeller) EP9070 which is a 9 X 7 propeller.

Performed numerous repairs on the wing and from a previous crash that occurred over 10 years ago and recorded right here somewhere under the Handle "Guapoman2000."

Okay, today it flew super early morning over at my RC Club and what a delight! It satisfied all requirements to the T. Very good airspeed and just an awesome almost 9 minutes and the Thunder Power 3-Cell, 1350mAH, 25C still had 11.98 Volts after the flight from a fully charged 12.5Volts state.

I believe that I could have flown for an additional 5 minutes with mix throttle and would have reached around 11.6 Volts from the Battery pack. Next time I will gradually increase flight times, land and measure then, repeat after fully charge and fly a little longer etc... etc...


For Pictures go to:
https://www.rcuniverse.com/forum/12615317-post12.html

For Watts / AMPs / Volts measurement:
https://www.rcuniverse.com/forum/12615359-post13.html

Thanks for watching!
Posted by Dynam RC Detrum | Yesterday @ 07:06 AM | 2,105 Views
Tomcat Motor car serise motor !!!🎉🎉🎉

1) have special separation preventing patent technology for magent in high speed brushless motors.

2) give an extra carbon fiber sheet for magnet to avoid the separation other than using dedicated glue

3) made of hard andized aluminum casing and uses 240 C R-leveled insulated winding,it explosion-proof rotor structure has 200C high temperature resistance

4) high precision and strength bearings.

5) One-piece structure which has dust proof feature can prolong the service life of motor

6) The slot for conducting heat on Motor casing and the silicone pad which is between the end cover and stator can dissipate the innner heat effectively reduce the possibility of damage.

More info&get it:
https://www.bitgohobby.com/CarMotors-ESCs
http://store.dynam-rc.cn/en-us/Product/index/id/50.html
Posted by Aussie Pete | Yesterday @ 06:25 AM | 2,106 Views
I have been flying water planes for a number of years now .
My most recent model the large Sea Master 120 scratch build is just a great model to fly and handles the water so well.
After completing the North Star , I now have a favorite water plane.
It tracked perfectly in the water trials and first flew with a 4000 mAh 3S lipo with slow flying speed.
Second flight was very impressive with a 5000 mAh 6S lipo. What a joy to fly....and land on water.
I modified / raised the motor pylon 3 inch higher to accommodate a 12 inch prop and glad I did.
Apart from a couple clicks of down trim it flew perfectly straight ...power on or off.
Motor is a Eflite power 32 running a 11 x 7 3 blade prop...60 amp esc and 5000 mAh 6S lipo .
All up weight is 90 oz...quite light really.....it glides / floats around without power on surprisingly well.

North Star Electric 2020 (2 min 17 sec)

Posted by Mandy Chen | Yesterday @ 05:10 AM | 2,176 Views
BrotherHobby New VY 1504.5 motor is coming soon!

2650KV: 5125 Triblade-4S,
2950KV: 3016 Triblade-6S,
3950KV: 3016 Triblade-4S.

Weight: 12g with 160mm Length