Posted by Reckless_fpv | Sep 06, 2019 @ 03:22 PM | 1,031 Views
Use HypetrainReckless01 for 10 percent off all hypetrain motors
Posted by UnknownForces RC | Sep 06, 2019 @ 04:00 AM | 1,199 Views
4WD solid rear axle, take split structure for easy maintenance.
Posted by Jumper factory | Sep 06, 2019 @ 03:51 AM | 842 Views
Jumper T8SG V3 PLUS
1.7inch LCD Screen
Voice capacity
Posted by phyngineer | Sep 06, 2019 @ 01:24 AM | 852 Views
Standing in the field, Lu Jiyu raised the Notuzi X85 drone to a height of 100 meters by manipulating the remote control in his hand, taking a picture of the whole watermelon field, and then using the big data formula to calculate the number of watermelons, quickly completing the past and causing headaches for farmers. The "number of watermelons" puzzle.

Lu Jis Hualien is an important watermelon producing area in Taiwan, with an annual output of more than 30,000 tons, ranking first in Taiwan. Lu Jiyus Shoufeng Township in Hualien County, the watermelon produced, feels the market with a full, sweet mouth. Because of the large number and difficulty in calculating, the farmers usually only have to "guess" the quantity and then negotiate the price with the middle, which is often suppressed.
Recalling the experience of watermelons in the past, Lu Jiyan said frankly, how to calculate is not good. He cooperated with friends who love to play drones and developed the use of MMC drone high-altitude image inventory technology to finally solve this problem. It was later proved that the amount estimated by the aerial shot was quite accurate. With reference data, farmers have the bargaining power of bargaining with middlemen, and they can choose favorable timings for shipments based on market conditions to obtain greater returns. Later, this technology was also used to monitor crop growth and assess a wide range of areas such as damage.

Lu Jiu, 39, originally...Continue Reading
Posted by Larron | Sep 06, 2019 @ 12:57 AM | 766 Views
Posted by Martin Zhuang | Sep 06, 2019 @ 12:52 AM | 801 Views
HGLRC Parrot120 Pro FPV Racing Drone PNP
Net Weight:71.4g

HGLRC Parrot120 Pro Frame Kit
Material: Carbon Fiber
Wheelbase:120mm
Type: 2.5" Frame
Arm Thickness: 2.5mm
Standoff Height: 23mm
Flight control installation holes: 16*16mm
Support camera: 14X14mm
Weight: 15g

HGLRC FD411 Flight Controller
Item Name:FD411 Flight Controller
MPU: MPU6000-SPI
CPU: STM32F411CEU6
Black Box: NO
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V 2A
Size: 21x21mm
Installing Hole: 16x16mm, M2
Support SBUS/PPM/DSMX/iBUS receiver
Weight:2.7g

HGLRC FD13A 4in1 BLS 2-4S ESC
Item Name: FD13A 4in1 2-4S ESC
Input Voltage: 2-4S Lipo
Constant Current: 13A
Peak Current: 15A(5S)
BEC Ouput: NO
Size: 23x24mm
Installing Hole: 16x16mm, M2
Weight: 3.2g
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Support Damped Mode:DSHOT600/300/150/Oneshot125/42,MultiShot,PWM

HGLRC FD VTX Micro 400mW
Item Name: FD VTX Micro
Output Power: PIT/25mW/100mW/200mW/400mW Switchable
Input Voltage: DC 5V
PIT---------0dBm------70mA
25mW-----14dBm-----150mA
100mW----20dBm-----210mA
200mW----23dBm-----280mA
400mW----26dBm-----360mA
Installing Hole: 16x16mm, M2
Size: 20x20mm
Antenna: IPEX
Weight: 1.5g

Caddx.us Turbo Eos2 FPV Camera
Item Name:Turbo EOS2
Image Sensor:1/3" CMOS
Horizontal Resolution:1200 TVL
TV System:NTSC / PAL option
IMAGE:16:9
Synchronization:Internal
Electronic Shutter:PAL: 1/50-...Continue Reading
Posted by Carmen Chen | Sep 05, 2019 @ 10:54 PM | 906 Views
Feature:
SUPERIOR SPEED RC CAR: With 2. 4 GHz radio control system, the 2019 Updated RC car will bring you a special driving experience. The 1/16 scale makes it more realistic and impressive. With two powerful built-in motors, it is always ready to run. The speed reaches up to 15-25 KM/H, which makes the car race faster than others.
HIGH QUALITY MATERIALS: Thanks to meticulous research and exploration of our professional technicians, this racing car is provided with unique style. The structure includes frame, cockpit, shock absorbers and motors are Super strong. Four huge anti-slip wheels connected by shockproof springs are terribly stable.
UNIQUE EXTERIOR DESIGN: Introduced advanced technology, the car body is made of high-quality ABS plastic and metal materials, which is safer and healthier. Used healthy paint spray materials on the surface, it's moisture-proof and will never fade. The car batteries are made of Ni-MH, which is more durable.
EXTENDED BATTERY LIFE: Equipped with two rechargeable battery packs, it is more durable than other regular toy cars. Due to battery upgraded, each battery pack can be used around 20-30 minutes ceaselessly, which provides longer entertainment performance. The USB line that comes with the car offers more convenience to charge.
REAL RACING EXPERIENCE: With the infrared remote controller, you can flexibly and conveniently control the directions and distances. The car can achieve forward or backward and turning left or right. SPESXFUN...Continue Reading
Posted by slomofoe | Sep 05, 2019 @ 08:59 PM | 708 Views
I'm hooked! I love all the flips and tricks that a plane can't do. I didn't think I would like it, I love it.
I've always had that glide ratio on a plane to fall back on. Some have a huge glide to them. I know the cub with a full wing is like a glider. You have to fly it into the landing where the clipped wing will come down on it's own. Even the shape will give more lift. The wing profile has so much to do with the flying characteristics.
Now the drone. Wow, what a difference. I couldn't wait for the vortex fix, so I got the torrent. I have to say I'm in a whole learning curve and I like it. I'm a long way from anything good but the new rush and thrill from something new is exhilarating. If my neighbors didn't hate me before, they do now. Up till now it's just been running up a motor in the back yard to get it ready for a day out. Now I'm buzzing around, and around, and around.
I went looking for a new plane I could fly in the yard and everything I looked at in my price range,( about 150) was too fast or so light and slow that any wind would take it for a ride three blocks over. That's when the salesman told me about the torrent. I was sceptical at first, so I went home and look at reviews and video's. I came back the next day and grabbed it and some batteries. Can't have too many batteries.
Now the glide ratio. When a plane battery starts to go it gives some warning. No power or lift, some will pulse to tell you your going down. with enough altitude you can usually get it closer to home, at least a controlled crash, but a drome just ends. That's it. I need to set the timer lower and fly closer to my yard.
Posted by Hobby Details | Sep 05, 2019 @ 08:33 PM | 769 Views
Offset Aluminum RC Servo Horns - 25T 26x9.5mm, L=13/16/19mm
DTSA02001A: Red
DTSA02001B: Purple
DTSA02001C: Grey
Wholesale Price please PM or contact me at: [email protected]
Posted by DutchRC | Sep 05, 2019 @ 05:02 PM | 810 Views
Halloa people

Sooo.. what can I say.. Below is a short video about my giveaway..
To that I should add that the X9 Lite Pro looks / feels better then I expected

check it out.. it's only a few minutes...

DutchRC & Banggood.com GIVE AWAY: FrSky Taranis X9 Lite Pro! - Banggood 13th Anniversary! (7 min 40 sec)

Posted by GroundControlRC | Sep 05, 2019 @ 12:58 PM | 745 Views


Here is a link to the Video:
https://www.youtube.com/watch?v=gTaQvGdxM18

The Z84 is a pretty nice Wing with a decent power system.
This version is the PNF that has a 2208 2600kv Motor, 30A ESC, and 5050 Prop.
I've found a 6040 Prop works much better than the stock 5050 Prop as it produces more thrust and is more efficient.
Let's get it in the Air!

The KMP 6040 Composite Prop proved to provide a lot of thrust with good efficiency.
When I landed I still had 3.85v per cell ;-)
My new favorite Prop for this Wing.

The LIPO I used for this Flight was a ZOP 3S 1500mah 40C LIPO.

***Note: I replaced the T-plug on mine with an XT60 Plug on the ESC

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Zeta Wing Wing Z-84 Z84 EPO 845mm Wingspan Flying Wing PNP
https://www.banggood.com/Wing-Wing-Z...47791920140372

Prop I use:

1pc KMP 6040 6X4E High Efficiency Propeller
https://www.banggood.com/1Pcs-KMP-6X...47791920140372

A LIPO to use:

ZOP Power 3S 1500mAh 40C Lipo Battery XT60 Plug
https://usa.banggood.com/ZOP-Power-1...47791920140372

Gens Tattu 3S 1300mAh 45C Lipo Battery With XT60
https://www.banggood.com/Gens-Tattu-...47791920140372

Gaoneng GNB 3S 1300mAh 40C XT60 Plug Lipo Battery
https://www.banggood.com/Gaoneng-GNB...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by SSM | Sep 05, 2019 @ 06:13 AM | 732 Views
Wizard 220 - now a few years old ....

Walk Don't Run (4 min 7 sec)

Posted by phyngineer | Sep 05, 2019 @ 05:42 AM | 740 Views
On September 4th, the Nanning City Water Search and Rescue Center did a 2019 water emergency new equipment demonstration and drill, used drones to locate the position of the "drowning victims", then the rescue team implemented the rescue process.

The drill simulated a collision between two ships, causing four people to fall into the water and a ship to sink. The water search and rescue center duty room immediately started the emergency action after receiving the alarm, and coordinated the rescue personnel in the search and rescue base, to carry new equipment for the rescue. The rescue team controlled the firefighting drone to quickly locate the rescue target on the water surface. The water rescue robot dragged the drowning victims back to the shore, rescued the three drowning victims with the help of the multi-function life-saving rod. After that, the rescue team continued to use the sweeping sonar and underwater robots to conduct underwater searches for wrecks and a missing person.

It is reported that the equipment used in the drill is the most advanced water search and rescue equipment in Nanning, including the Thyea Z40 HD zoom camera developed by MMC, which can let you see a clear face of a person in nearly 1 km, and Thyea T2 thermal imaging camera which can fast and efficiently locate the target. Besides water rescue, the MMC UAV has been used in the primeval forest for emergency rescue.

A total of 2 sea patrol ships, 3 rubber boats, and 2 MMC X85...Continue Reading
Posted by nigelsheffield | Sep 05, 2019 @ 01:36 AM | 1,222 Views
This looks a bargain SD card and good reviews so I ordered one from banggood and will report on its quality when it arrives , reviews are good and all say it passes with full capacity and most importantly is NOT FAKED lol.

128gb sastfoe https://bit.ly/2lwvT7O only $12 posted!

They also sell a 256gb for a bit over twice the price which I might get if this one works well enough.
Posted by Eddie P | Sep 04, 2019 @ 11:58 PM | 784 Views
Vans RV-8 and Glasair 3 formation hop. Real flying and model flying are both fantastic in their own right.

CX-EX No.121 Squad Hop 1 (1 min 5 sec)

Posted by old4570 | Sep 04, 2019 @ 11:09 PM | 921 Views
The journey to the dark side begins

I pulled out the Factory Rx ( Rx and Tx will be re used for something else - budgety )
The brushed motor was given a connector !

Then I took the 20A brushed ESC and plugged it .

I just did a current / function test and everything works as it should .
Factory it pulled around 4.6A , and with the new ESC it pulls exactly the same ( around 4.6A ) Thats 2s folks .
Next I need to solder up a 4ch Rx , and the Darth Invader should be re born after it's near death experience .
Hopefully be test flown shortly as apposed to test crashed