rocketscience's blog View Details
Posted by rocketscience | Mar 16, 2015 @ 10:25 PM | 7,861 Views
You can see a parts list here:

5.8 mini ground station (3 min 34 sec)


case: http://www.mcmelectronics.com/product/22-21860
dvr: http://hobbyking.com/hobbyking/store...r_for_FPV.html
monitor: http://www.ebay.com/itm/7-inch-LCD-H...item2338637378
5.8 receiver: http://hobbyking.com/hobbyking/store...er_Cables.html
antenna: http://www.readymaderc.com/store/ind...oducts_id=1253
voltmeter: http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

EXCEPT I changed out the vrx for this one:
http://hobbyking.com/hobbyking/store..._Receiver.html

the only disadvantage of the new rx is you have to power it on with a button. The toggle no longer makes it power on automatically.

At the front of the case is a hard-case 5000mah 2S lipo.





...Continue Reading
Posted by rocketscience | Oct 17, 2010 @ 10:49 AM | 8,174 Views
Blog and discussion on high voltage systems. So far I've only done this on 450s and very soon a 500.

Details to follow. Reasons, advantages, disadvantages, how-tos.

Reason:
Believe it or not the main reason I did this was 2 instances.. 1) I wanted to stretch a pro (clone) frame and needed the extra weight in the front. 2) I had a 450 v2 with a mini servo on the tail and needed slightly extra weight on the front. More details on those 2 helis below. Next I will take my 500 and go from 6S to 8S and see what happens. I have 3 out of 4 of my batteries going bad and it's a shame the 6S batteries cost so much and I don't have anything else to use them on. 4S 2200ma batteries I can use on my other hv heli and my pusher prop plank.

Advantages:
This has been discussed elsewhere quite a few times but strangely enough I couldn't find many people who did it here on rcgroups. With higher voltage you don't need the crazy C ratings. For example on the Pro I used 35C 3S batteries and when I went to 20C 4S the temperatures were about the same, maybe even lower. I actually took temps on 1 day between a 3S pro and 4S stretched pro.

Longer flight times. On the trex pro I get about 4.5 minutes (2200 ma 3S). On the 450v2 I get 5.5 minutes (1800ma 4S). On the 450pro stretched I get about 6 minutes (2200ma 4S).

Disadvantages:
No way to get around this one. Extra weight. On the stretched 450, it's expected. Longer boom, larger blades. On the v2, I WANTED it to balance out the...Continue Reading
Posted by rocketscience | Dec 27, 2008 @ 12:01 AM | 8,205 Views
I got a new camera in December of 08 and tested out the video function on the Exceed blueray. Note it's better viewed in HD:

"http://www.youtube.com/watch?v=3CRBsBLKwJQ&fmt=22"

video