Qwinout's blog View Details
Posted by Qwinout | Jul 19, 2019 @ 03:04 AM | 1,576 Views
GEPRC Phoenix3 GEP-PX3 140mm Wheelbase F4 FC 3 Inch FPV Racing Drone PNP BNF W/ RunCam Micro Swift Camera VTX 1206 4500KV Motor

https://qwinout.com/collections/fpv-...6-4500kv-motor


Specifications:
Name: PHANTOMThe size of the gep-px3 version is more of an outdoor flight, and the size and power upgrades mean better flight performance.

The frame is a 3-inch version of PX, and the lens protection material is still 7075 aluminum.The overall use of 3K carbon fiber, 3mm thickness of the bottom plate and 1.5mm thickness of the top plate to ensure the durability of the frame.3D printed TPU tail combination LED lamp design.Position the battery up and down according to the flight habits.The overall model is compact and delicate, beautiful appearance.

This major upgrade to the powerpack will be paired with SpeedX's gr1206-4500kv motor and the EMAX AVAN Mini 3-inch propeller, powered by a 4s battery, for excellent flight performance.

The camera adopts Runcam Micro Swift, and the flight control system adopts STABLE F4 Towe 20A version, which is simple and convenient to install, STABLE and good system, suitable for small wheelbase competition.

Specifications:
Frame: GEPRC GEP-PX3
Wheelbase: 140mm
Camera protection: 7075 aluminum
Bottom plate: 3mm
Top plate: 2mm
side plate: 1mm
Motor: GEPRC GEP-GR1206 4500Kv
Propeller: EMAX AVAN Mini propeller
GPRC STABLE F4 Tower (GEP-F4-BS20A-VTX58200-M) V1.4
Flight Controller: Betaflight F4 OMNIBUS
ESCs: ·20A BLHeli_S/...Continue Reading
Posted by Qwinout | Jul 17, 2019 @ 10:45 PM | 2,147 Views
GEPRC PHANTOM Toothpick Freestyle 125mm 2-3S FPV RC Drone Quadcopter PNP BNF with 1103 8000KV Motor F4 Flight Control 12A ESC

https://qwinout.com/collections/toot...ontrol-12a-esc

Many people prefer the 4S version,the 4S version with 5500KV motor,it is preorder now ,will be available at the beginning of August,same price
https://qwinout.com/collections/toot...trol-12a-esc-1

Specifications:
Name: PHANTOM
FC:F411
ESC:12A
Motor: GEPRC GEP-GR1103
Wheelbase: 125mm
Propeller: 65mm
VTX:5.8g 200mW
-Weight: 51g (without battery)

Features:
1.All 3k fiber carbon plate
2.GEP-12A-F4 AIO
3.GEP-GR1103 motor
4.Support 2-3S Lipo
5.Include betaflifht OSD
6.IRC Tramp

Include:
-1 x PHANTOM Quadcopter
Posted by Qwinout | Jul 13, 2019 @ 03:58 AM | 3,000 Views
it seems that many people are talking about cinewhoop,and many factories in China are producing cinewhoop FPV Drones
but what cinewhoop means ?
As far as I am concerned,cinewhoop is a frame kit that can carry a Camera like GoPro Hero 7
like these drones ?
https://qwinout.com/collections/cinewhoop
Posted by Qwinout | Jul 11, 2019 @ 05:38 AM | 1,416 Views
Drone FAQ Analysis and Solutions

https://qwinout.com/blogs/news/drone...-and-solutions


Q:The motor cannot be started after power-on, no sound

R:Poor contact of power connector

A:Reinsert the connector or replace the connector

Q:The motor cannot be started after power-on, and the “哔-哔-, 哔-哔-, 哔-哔-” warning tone is issued (the interval between every two sounds is 1 second)

R:Battery pack voltage is abnormal

A:Check battery pack voltage

Q:The motor cannot be started after power-on, and a “哔-, 哔-, 哔-” warning tone is issued (the interval between each sound is 2 seconds)

R:Receiver throttle channel without throttle signal output

A:Check if the cooperation between the transmitter and the receiver is normal, and whether the throttle control channel wiring is tight.

Q:After the power is turned on, the motor can't start, and the "哔, 哔, 哔, 哔, 哔" sounds a single tone.

R:The throttle is not reset to zero or the throttle stroke is set too small

A:Put the throttle stick to the lowest position;

Reset throttle stroke

Q:After power-on, the motor will not start, and a “哔-哔-” beep will sound, then a “56712” special tone will sound.

R:Throttle channel "positive/reverse" error

A:Refer to the remote control manual to adjust the “positive/reverse” orientation of the throttle channel.

Q:Motor reversal

Q:Wire...Continue Reading
Posted by Qwinout | Jul 10, 2019 @ 09:41 PM | 1,593 Views
Warning:
https://qwinout.com/blogs/news/mobula7-warning

This is indoor copter, Can’t be flying outdoor when there is wind!Can’t be flying too high to affect the sight!
It is necessary to go to a place with a large space to play it (Especially the novice must pay attention)!

If the Copter collides with items such as walls, you must timely lower the throttle! Otherwise ESCs and motors may be burned, and battery may be burned or exploded.

About the Li-po Battery:
1s=3.7v is the best retention voltage for the copter’s battery. After fully charged, it is about 4.2v. The battery voltage is below 3.5v for over-discharge.

2s=7.4v. After fully charged, it is about 8.4v. The voltage is below 3.5v 7.0v for over-discharge.

The battery that just flying used cannot be charged immediately (it will cause damage to the battery).

If you have any questions, such as binding Remote controller, please contact our customer service, we will provide technical services in a timely manner.
BeatFlight Firmware download URL
https://github.com/betaflight/betaflight-configurator

Driver download:


Before Flying, Please check if all screws on the motors and other place are secure.
The welding part of Flight controller is easy to be damaged , Please connect the battery and the copter kit very carefully. (Take out the battery a little first and then connect it to the flight controller. DO NOT tug on the cables with the flight controller directly, or it will be damaged)

Please connect the battery in the right way (Red wire to Red wire, Black wire to Black wire). Wrong connection will damage the Flight Control Board.

The ESC/Flight Controller/Motor/Battery and other accessories are damaged due to personal flight errors. Please purchase accessories to replace them yourself.
Thank you for your cooperation.