Posted by DTD_2112 | Today @ 05:23 PM | 3 Views
I visited a crawler track at the back of a hobby shop about 23 miles away. I got a lot of good info and picked up a few tips. Ive started to make some changes and we are starting to add a second elevation on the crawl area of our track.
The boxes will be filled with rocks or boards of various offcut sizes on their ends that will have plenty of ways to get to the top. Tomorrow Im building the rickety old suspension bridge. The red ink in the one photo is where the rickety suspension bridge will be built to get up to the next level.
Posted by DumbthumbsFPV | Today @ 12:27 PM | 415 Views
I bought this and the bats.. just wanted to share..
It's really good
Mobula6 R3D Shifters Low profile Frame (5 min 37 sec)

Posted by DutchRC | Today @ 12:15 PM | 427 Views
Halloa people

so yes. I'm going to be doing a fresh new quad build.. In fact: I will do a Detailed How To of this build.
To kinda kick things of a bit I'll start by reviewing the frame I will use in that build series. And I used a Premium frame this time

Link to the frame: Catalist Machineworks BongGOD 5" Freestyle frame

And here are my findings on the frame + some additional info on it:

the BangGOD Freestyle frame by Catalyst Machineworks! - FRAME REVIEW (20 min 38 sec)

type: Freestyle
wheelbase: 234 mm
base thickness: 5mm arms
material(s): carbon fiber + metal standoffs
weight: 142 grams
chamfered edges: yes
clean: VERY
buzzer: nope
LED board: nope
battery strap: 2x
battery anti-skid pad: nope
Posted by PittSpecial | Today @ 09:58 AM | 789 Views
Just an amazing Prop Jet model, especially with the Electric Power System. It has been perhaps 2 years that I have not flown it so, I got the step stool and lower it down from hanging all this time. Dusted it off and checked all systems and afterwards, headed to Moon Port on Sunday, 01-26-2020. It flew for 3 flights and didn't disappoint!

A Few high resolution and wide bandwidth pictures can be seen at:

Enjoy the Video below.

Hangar9 F22 Raptor Glow-to-Electric Conversion 01-26-2020 (2 min 51 sec)

Here is an example of the speed of this Prop Jet can attain.
Hangar9 F22 Raptor Maiden Flight FAST PASS 10 25 2015 (0 min 6 sec)
...Continue Reading
Posted by jmxp69 | Yesterday @ 10:32 PM | 1,475 Views
Maiden day for the Waco was nasty windy. I got out at sunrise and took another shot at it. A calm day made all the difference:

Dynam Waco 2nd Flight (6 min 25 sec)

Posted by GBLynden | Yesterday @ 06:33 PM | 1,669 Views
Go for a ride on my ZOHD Talon GT Rebel RC Plane With Runcam 2 Onboard Footage!

Go For A Ride On My ZOHD Talon GT Rebel RC Plane With Runcam 2 Onboard Footage (6 min 45 sec)

Posted by Fester602 | Yesterday @ 03:50 PM | 1,736 Views
I recently was given a skyrover 6 blade drone the remote will not pair to drone is there e anyways to download an app or make any other remote qork
Posted by Pieter Bot | Yesterday @ 03:12 PM | 1,748 Views

My new project is to build a Jodel D9 "BeBe".
The kit is from RBC kits.
I still get some tips/tricks which help me building this plane, it's my third kit (1st Red Eagle glider, 2st Chica).
At this moment i am building the stabilo and wing. See the pictures.
Motor will be : Propdrive V2 4248 650KV
Receiver: Spektrum , type not sure yet
Posted by Old_Pilot | Yesterday @ 01:53 PM | 1,866 Views
On the downwind leg, my instructor shut down the port engine, and wouldn't let me flying a drunken whale with a hard starboard list.......

A300 Airbus, 07L Hong Kong Port engine out (2 min 23 sec)

Posted by jmxp69 | Yesterday @ 01:04 PM | 2,028 Views
This didn't quite work out the way I expected it to...
Dynam Grand Cruiser Maiden (14 min 58 sec)

Posted by BernardW | Yesterday @ 12:37 PM | 2,043 Views
Very sad to hear about this -
The 3 American crew aboard that plane had come with it to Australia to help fight the fires, and perished doing it. This explains better than I can -

It says there are 80 fires still burning in NSW and half of them uncontained. So it's by no means finished yet. It's still very dangerous fire conditions across most of the country and they're burning all the time in other states too.
I think it's incredible what the water bomber crews do. These videos have most often been about the Large and Very Large Air Tankers but there are all kinds of flying machines throwing retardant against the fires. It must be so dangerous. All those fire crews out there are doing a fantastic job against those terrible fires and some are losing their lives to it. It really moves me.
Posted by skeeter honey | Yesterday @ 12:28 PM | 2,143 Views
Being relative new to this hobby, I haven't really become accustomed to dropping a few hundred bucks on decent birds that I'll get to fly a couple dozen times (at best) before turning them into piles of garbage. So instead of a locked-in BNF plane for $250, I decided to spend just as much (not really) piecemeal on some kits, starting with something small and relatively easy and working up to a NIB GWS ME-262 kit I have collecting dust.

Finding cheap, decent ARFs doesn't seem as easy as it used to be, or so old threads here would have me believe, but I did find that one can get an old EPO FlyFly ARF kit on the Value Hobby site for only $20.

So why not? I ordered it and it arrived in no time. After checking the contents, it looked like everything was there.

I was immediately impressed (but what do I know) with the quality of the kit. Pieces fit together very nicely (manufacturing nubs notwithstanding), and it's much tougher than I was expecting. The only complaint right out of the gate was that the main gear is not F4U gear, but it'll do. The tail gear is very true to the original, and I have plans for that. Also, the left wingtip by the aileron was slightly bent, but I poured hot water on it and it popped right back into place without the surface distortion you get on EPS.
Posted by BDOG1 | Yesterday @ 12:06 PM | 2,069 Views
I spent last evening with my monokote iron working on the tail group of the DAW 1-26 and DAW P-51 Mustang
Its so relaxing to lay some covering down and see projects nearing completion
The 1-26 needs to have the control snakes installed ,plastic covers added over the tops of the servos and then the fuse can be covered .

The Mustang fuse is ready for some 3M- 77, stapping tape and then covering .
I am using the HK covering on both planes ,it is nice to work with
Posted by 1nspectorGadget | Yesterday @ 11:29 AM | 2,079 Views
V-Coptr Falcon Drone | Snap Poll (3 min 10 sec)

The V-Coptr Falcon two-rotor drone by Zero Zero Robotics is probably one of the most polarizing yet highly anticipated drone offerings that I have seen. Some folks proclaimed, "scam" when the drone was first announced. This may in part be due to the delays Zero Zero Robotics had in developing and releasing the Hover 2. I also think the declaration of 50-minutes of flight time raised suspicions. With only two motors to power, could it actually be possible?
Posted by GroundControlRC | Yesterday @ 09:12 AM | 2,125 Views
Sneak Peek on my Build Progress of the MinimumRC B-25 Mitchell Part 4

Here is a link to this Plane:

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #MinimumRC #B25Michell #B25 #Bomber

This Plane is Courtesy of MinimumRC!

The Build is Complete!
Ready for Flight ;-)
As soon as I have the Weather, it's time for the Maiden Flight!

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC Glue & Fly Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have access to the latest Aircraft Plans & Exclusive Content!

See Us On Youtube | Patreon | RCGroups
Posted by Bill M - RC | Yesterday @ 07:33 AM | 2,139 Views
Hi fellow rc pilots & rc enthusiasts

Bugs 5W 4K review. In this MJX Bugs 5W B5W 4K version review I include unboxing, inspection, functions, features, app, calibration, camera, flight, duration and failsafe tests.

Get this MJX Bugs 5W B5W 4K Version 5G WIFI FPV GPS Quadcopter Drone with Single-axis Gimbal 20mins Flying Time Follow Me Mode RTF here now:

MJX Bugs 5W 4K Version Full review 5G WIFI FPV GPS Quadcopter Drone (47 min 27 sec)

MJX Bugs 5W B5W review - 4K 3840x [email protected] Video & photos in overcast conditions:

MJX Bugs 5W B5W review - 4K 3840x [email protected] Video & photos in overcast conditions . (3 min 43 sec)
...Continue Reading
Posted by Mergan | Yesterday @ 06:20 AM | 2,438 Views
Looking to purchase an Aquacopter Bulfrog frame.
Checking if anyone has one for sale?

Posted by old4570 | Jan 25, 2020 @ 07:55 PM | 3,860 Views
Posted by jetpilotrich | Jan 25, 2020 @ 07:47 PM | 3,891 Views
See the New HSDJETSUSA.COM 12s 105mm Super Viper PAVED RUNWAY FLIGHT DEMO here and some bonus pictures of some COMING SOON Models! Enjoy!