Blaze0021's blog View Details
Archive for August, 2016
Posted by Blaze0021 | Aug 19, 2016 @ 03:07 PM | 3,954 Views
This is my third 3S recorded Flight of my UMX P-47 Thunderbolt using the Hyperion 3S 240 mAh Babbelbatt and the Eflite 3000Kv Motor / Eflite 5 x 2.75 Propeller combo. The Landing Gears have been removed for belly landing duties at Cherry Knolls Park (for best results, view this video in full screen 1080p and turn the volume up to hear the awesome sound).

Eflite UMX P-47 Thunderbolt 3S Gears Off Flight with the Hyperion 3S 240mAh Babbelbatt (5 min 56 sec)

RC Groups Initial Blog Write-Up with Photos on Modifications: https://www.rcgroups.com/forums/show....php?t=2660882

To purchase Roger's Hyperion 3S 240mAh Babbelbatts, click on the link below to view his store.

Link to RCBabbel's Babbelbatt Store: https://www.rcgroups.com/forums/member.php?u=54990

MODIFICATIONS / UPGRADES
Motor: Eflite 3000Kv 180 Brushless Outrunner
Prop Adapter: Small Parts CNC UMX Prop Adapter (Long)
Prop: Eflite 5 x 2.75 Propeller w/ Custom "Blue Angels" Yellow Tips
Hatch: Custom Magnetic Battery Hatch Mod
Reinforcement: .050 Carbon Fiber Horizontal Stabilizer Rod Spar

Transmitter: Spektrum DX6
Battery: Eflite 3S 240 mAh Babbelbatt
Timer: 4 Minutes
Lipo Final Voltage: 11.17 Volts out of 12.60 Volts (18%)

Camera: iPhone 6 at 1080P / 60 FPS
Headmount: http://www.amazon.com/Mount-Smartpho..._detailpages00

Thanks for watching and if you haven't already please click the Thumbs Up and Subscribe!
Posted by Blaze0021 | Aug 01, 2016 @ 04:10 PM | 4,800 Views
This is the Maiden Flight of my Eflite UMX Spacewalker 2S Brushless with Dual Servo Ailerons "Worldrunner" Edition.

Eflite UMX Spacewalker 2SBL w/ Dual Servo Ailerons Maiden Flight - Worldrunner Edition (6 min 25 sec)

This is a 2SBL with Dual Servo Ailerons Conversion using a brand new in the box Eflite UMX Spacewalker. Having previously purchased and flown a stock version of the plane made me feel that this plane could certainly do much more, given the outdoor conditions I mainly fly in.

This conversion was fairly straightforward with no major issues. Hollowing out the front end but leaving enough foam for structural rigidity was the most difficult task. The UMX Yak Motor Mount was also cut and shaped to fit within the fuselage and glued in, using GE Type II Silicone. I initially elected to use an Eflite BL180 2300Kv Motor, but decided that the 3000Kv version was a better match for outstanding throttle when mated with the Eflite 3.75 x 3 Prop.

To mount the Spektrum EFLU4864 AS3X Receiver BL-ESC, I cut the edges edges of the interior foam fuselage slightly to form a ledge that the Receiver would sit on, and then glued it in with GE Type II Silicone. Then the Elevator and Rudder Control Rods were cut and resized for proper fitment.

Using an Xacto knife, I carefully cut out the pre-molded Ailerons on the Wing, and then exercised the Aileron hinges. Then, I applied a small thin layer of hinge tape on the hinges for added durability. Mounted on...Continue Reading