R/C Blogs - RC Groups
Posted by BirdVision | Today @ 09:00 PM | 29 Views
Eagle tree vector first flight 1.2km Awesome 👍👍 (7 min 49 sec)


AWESOME 👍👍👍

Stabilization excellent out of the box no need to tune
lots of Satellites and fast lock
Able to hook up computer to eagle tree eagle eyes and view on google maps location and telemetry
Easy to set up lots of functions to choose from
Expensive but worth it for what it can do which is a lot
Posted by zzzzzed | Today @ 08:40 PM | 44 Views
Another Special Announcement.
DragonRC is now the exclusive distributor for Rocky Shock Wave Jet in Australia and NZ. We promised we will bring you more jets. Here it is - the Aermacchi MB339 scale jet with lots of scale details. It is a complete PNP kit with everything installed including wiring and connectors. Just put in your turbine and radio and go fly.
2 colour schemes - Blue and Red/White
More information here:http://www.dragonrc.com.au/Shock-Wav...p/sw-mb339.htm...Continue Reading
Posted by NightTrain0128 | Today @ 08:18 PM | 81 Views
Parkmaster 3d build
Posted by zzzzzed | Today @ 08:02 PM | 73 Views
Special Announcement.
DragonRC is the exclusive distributor for Aviation Jet. Top quality jets with lots of details and top quality build that is second to none.Jets from this stable - Rafale 3D Jet single or twin turbine, Sparrow and Atlas Sports Jets. The new Su35 will be available soon. Tell us what tyou think of the colours. If you have a special colour scheme please let us know.
We will continue to bring you new jets.
More information here:
http://www.dragonrc.com.au/Jets-s/1914.htm
Posted by weathervane | Today @ 07:46 PM | 74 Views
I decided to add a new boat to my marine fleet. It probably isn't the best boat on the planet but I got it for a decent price and I always wanted one.

So I picked up a ProBoat Ragazza 1 meter sail boat. Man this thing is big. A bit taller than I expected. I am looking forward to taking it to the pond for a maiden voyage.

A lot of the reviews said to stay away from this boat. A lot stated to directions were bad. And they were not kidding. The directions for this boat are the worst I have ever seen. Very poorly written. Who ever wrote them, definitely wasn't a modeler.

The boat came well packaged. Lots of foam to protect the hull and mast. All the parts were in their own bag with lables. ( all were wrong) The sails were packaged in a seperate tube with foam caps. The included radio was in its own box with padding to protect it as well. A nice aluminum stand was also included.

The hull is made of fiberglass. (a plus in my book) The fit and finish looks amazing But, parts bags were mislabled. Most parts were not in the correct bag anyway. A few of the screw holes didn't line up. Some of the screws looked used with the heads stripped out of them. The rigging for this boat is not very good either. The ends have crimp conections with adjustments at the bottom. I had two (2) of my adjustment ends pull apart. Thankfully I have a welder and was able to fix them. The spreader bars and crane on top of the mast are plastic. I will be interested to see how long...Continue Reading
Posted by mlilasic | Today @ 05:38 PM | 179 Views
Review (ip) of ImmersionRC Tramp HV 6-18V 5.8GHz 1mW to>600mW Video Transmitter International Version V2



Tramp HV just came for my 6S build.

I will be using this 6S compatible components:
  • Kakute F4 AIO v2 - product link
  • 2207 1700kv motors designed specific for 6S - product link
  • Gaoneng GNB 1100mAh 6S 130C 22.2V Li-on Lipo Battery XT60 - product link
  • X-Racer Quadrant 2-6S 35A 32Bit BLHeli_32 Dshot1200 ESCs - product link
  • ImmersionRC Tramp HV 5-18V 5.8GHz 1mW to>600mW VTX International Version V2 - product link


Build quality of VTX seams great.



Weight is only 9g:

...Continue Reading
Posted by Jon.M.Barter | Today @ 05:26 PM | 190 Views
pics of items:
Posted by Tazkiller85 | Today @ 04:35 PM | 254 Views
Yep Les Amis,
Dans la famille MJX, je demande le B3 PRO !!! Je vous présente aujourd'hui le BUGS 3 PRO de chez MJXRC. Un appareil polyvalent dédié à la prise de vue, car vous pourrez soit le commandé tout équippé avec sa caméra 1080p, soit le prendre seul et installer votre propre caméra dans le support fourni. Son application très complète et efficace vous permet plusieurs modes de vol comme le Follow Me, le Mode Circle et un mode Dessin (Way-points) . La communication bi-directionnelle vous évitera de perdre votre appareil car dans tous les cas, l'engin reviendra à son point de décollage, même si vous avez désactivé le vol avec GPS . Précis, sécurisant et stable, il sera très facile à prendre en main si vous êtes débutant . Dans la prochaine vidéo, je vous montrerai bien sur, le BUGS 3 PRO, en pleine action ...

MJX BUGS 3 PRO Déballage et mise en route / MJX PARTY !!! (22 min 20 sec)


NOTATAZ : 16.5/20 Pas MAL mais Pas Irréprochable !

NIVEAU : Débutants
Les + : Stable, Bon positionnement GPS, Modes de vol fonctionnels
Les - : Vidéo Saccadée (25fps), Autonomie moyenne .

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Site MJXRC : : http://www.mjxrc.net/
- Support caméra pour Onepa X2000 : https://goo.gl/S31C7G
- ONEPAA X2000 Caméra : https://goo.gl/ZecQuZ

Mon matériel :
- Caméra GIT2P (casquette) : https://goo.gl/auJNu2
- Stabilisateur smartphone ZHIYUN SMOOTH Q...Continue Reading
Posted by mwhidden | Today @ 03:09 PM | 295 Views
This is the 2nd post in my build log for the Mark's Models Wanderer balsa glider kit.

With some help from my daughter, we have built the outer panel of the left wing. Most of these ribs needed their tails trimmed a bit to fit, and one was about 1/32" short at the leading edge. I used a bit of epoxy there to bridge the gap, but I feel like there should be a better way.

Raising the tip to 3 3/8" above the table, it was glued into place and looks pretty good. I applied the 1/16" balsa sheet to the three inner ribs (my first ever balsa sheeting... it turned out pretty good I think). Next, the bottom sheeting needs to be applied to the three root ribs, and the wing tip and wing root need to be sanded flat. Then it will be time to work on the right wing.

I'm bringing this wing to my local RC club meeting for their review and comments/advice.
Posted by Absaroka | Today @ 12:36 PM | 403 Views
Lot of folks having trouble bending the stock tail wheel. So, replaced mine with a 30cc carbon fiber one. -Drill three holes --cut to size--shorten tension springs and install. Works like a charm and it's not going to bend.
Posted by mlilasic | Today @ 11:18 AM | 440 Views
Review of Eachine EX2mini - Brushless 5.8G FPV Camera With Angle Mode Acro Mode RC Drone Quadcopter RTF


EX2mini looks great



I did a quick maiden LOS flight and it flies amazing.

Eachine EX2mini quick LOS test flight - Brushless 5.8G FPV Camera With Angle Mode Acro Mode RC RTF (1 min 7 sec)




Stay tuned for FPV flight video footage...



Description:
Frequency: 2.4G
Channel: 4CH
Gyro: 6 Axis
Motor (x4): Brushless 1306 2750KV
Propeller:3025
Charging time: About 3-3.5hours
Flying time: About 8-10mins
Control distance: About 200-300m
Quadcopter battery: 7.4V 850mAh Lipo
Transmitter battery: 4 x 1.5V AA battery ( not included )
Size:22*22*6.5cm
Package Size: 26.5 x 14 x 22.5 cm
FPV Camera: C5810 5.8G 25mw 24CH ( optional)
FPV Dstance: about 200m
FPV Monitor:4.3 inch 5.8G ( optional)
Color: Black
Weight:






Features:
* 2.4GHz Technology Adopted for Anti-Interference.
* 4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°.
* 6-axis gyro which can have more stable flying and be easy to control.
* 5.8G FPV with C5810 HD camera are tuned amazingly to capture stunning pictures and videos from the sky.
* With 1306 2750KV Brushless motor, make your flight more powerful.
* With Angle mode, the aircraft can perform flips and rolls if you press the rolls button and operate the control stick.
* With Acro Mode, requires flexible manual control during flight,...Continue Reading
Posted by Joe Pierson | Today @ 10:00 AM | 460 Views
This is my Aero-naut Spitfire its 23" long! Was fun to build I need a outboard motor for it!
Joe
Posted by kopterheld | Today @ 08:52 AM | 501 Views
Now Banggood shipping the Diatone GT-M3 in version 2. With the better F4 FC, TBS VTX is mounted upper with good LC filter and a capacitor on the rear for better FPV video. The amper sensor is now on the new 4in1 ESC's board, not more on the XT30 power connector. It flies very well with many speed. A buzzer is included, that you have to install. The Diatone GT-M3 racer flies very well. He is very fast just the perfect 3 inch FPV Racer. The FPV image is super with no interference and can be configured via the remote control on the OSD display. Finally a good FPV Racer where nothing needs to be rebuilt.

Video –Diatone GT M3 V2 schnellster 3 Zoll FPV Racer DE with EN subtitles
Diatone GT M3 V2 schnellster 3 Zoll FPV Racer (5 min 36 sec)





...Continue Reading
Posted by nigelsheffield | Today @ 08:51 AM | 515 Views
Very careful flying with a small quiet ducted fan quad ( whoop)
To get the puppy Charlie junior used them.
His dad Charly senior ( yes I know lol ) is an old hand and doesn't bat an eyelid , he just goes off and finds a quiet spot till I finish lol.

Puppy meets whoop (Charlie junior first encounter) his dad Charly is an old hand. (1 min 9 sec)


I don't encourage anyone to do this, I can fly very well and only use whoops for indoors around pets and only fly if it doesn't bother them.
Be safe and respect them!

Cocker spaniels make great family pets by the way, love mine more than flying and that IS saying something lol!
Posted by FPV.Model | Today @ 04:28 AM | 695 Views
Skywalker X8 Flying Wing




Original Price:$169.99
Now: $139.99
Link: https://goo.gl/LnxKtr

Price Until 22nd June !
Posted by old4570 | Today @ 02:40 AM | 738 Views
Banggoods RC Sale has started ...

And there is so much tempting STUFF !

I nearly dropped the hammer on the WL 930 ...

Must resist the siren song !