UnknownForces RC's blog View Details
Posted by UnknownForces RC | Today @ 01:25 AM | 127 Views
Our 2WD Brushless 1 / 6th Desert Buggy from CARS&Details Magazine .

UFRC Growler GX1 (1 min 59 sec)

Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,510 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:24 AM | 1,441 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:17 AM | 1,461 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:27 AM | 1,455 Views
(Left Losi right UFRC)
The huge spindles at the front suspension fill the rims almost completely and guarantee high load capacity. The joint balls in the a-arms have a diameter of 15 mm (FG uses only 10 mm for the same vehicle size).

Front and rear spindles/uprights prepared for installation of in-wheel brakes.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:06 AM | 546 Views
Drive shafts with wheel-side CVD joint as in Losi 5ive vehicles. The drive pin on the diff side is also replaceable and has a diameter of 6 mm!
Posted by UnknownForces RC | Sep 17, 2019 @ 03:02 AM | 402 Views
Differential cup made of cold extruded aluminum, no fragile cast part!
Posted by UnknownForces RC | Sep 17, 2019 @ 02:48 AM | 403 Views
Large-volume shock absorbers with oversized 8 mm piston rods.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:32 AM | 483 Views
The UFRC Growler GX1 has metal thread inserts in the plastic parts at high-stress mounting points.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:28 AM | 489 Views
Aluminum skid plate/chassis reinforcement for the front axle as standard. Steel reinforcement plate for the chassis in the servo saver area as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:59 AM | 491 Views
Front suspension with ball-raced balance beam for the shocks (can also be locked if required) for running on very uneven terrain.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:57 AM | 493 Views
Machined connecting plates for the hinge pins with exchangeable plastic inserts as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:56 AM | 447 Views
Bent and milled tub chassis made of 5 mm thick aluminum for extreme rigidity.
Posted by UnknownForces RC | Sep 06, 2019 @ 04:00 AM | 1,169 Views
4WD solid rear axle, take split structure for easy maintenance.
Posted by UnknownForces RC | Sep 03, 2019 @ 04:50 AM | 682 Views
Includes: Headlights, searchlight, fog lights, front and rear turn signals, high-frequency tail lights, brake lights.
Posted by UnknownForces RC | Sep 02, 2019 @ 10:11 PM | 767 Views
The LSD Lock of GR1 4WD SOLID REAR AXLE TRUCK.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:47 AM | 1,058 Views
Modular design, compact and logical layout , maximizing interior spacing.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:45 AM | 985 Views
GR1 1:5 4WD REAR AXLE TRUCK (0 min 42 sec)


The gear system is scientifically calculated and rationally designed. greatly reduce the motor, ESC load, and improve the stability of electronic equipment.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:43 AM | 872 Views
Fully enclosed receiver box, provide better protection towards water and muddy conditions.