Posted by Bill M - RC | Sep 19, 2019 @ 06:00 AM | 479 Views
Hi fellow rc pilots & rc enthusiasts

Happymodel 1102 8500kv Brushless Motors review. These Happymodel EX1102 8500kv brushless motors are one of the lightest motors around, well crafted & designed with double bearings & good dynamic balance.

You can get these Happymodel Brushless motors in UK here: https://amzn.to/2NvcgKj

You can get these Happymodel Brushless motors Internationally here: http://bit.ly/2lXhrWE

RC CLEARANCE SALE on here: http://bit.ly/2mpFKgd


Happymodel 1102 8500kv Brushless Motors review (5 min 49 sec)

Posted by Hobby Details | Sep 18, 2019 @ 09:14 PM | 512 Views
Premium 12 in 1 Magnetic & Lock Screwdriver Set

Hex1.5/2.0/2.5/3.0mm
Box4.0/5.5/7.0/8.0 mm
Phillips 4.0+/5.0+
Flat 4.0-/5.0-

Titanium Tips(6.35mm/1/4)

1set
Wholesale Price please PM or contact me at: [email protected]
Posted by DoubleEagle | Sep 18, 2019 @ 07:54 PM | 523 Views
Giant 1/7 Scale RC Land Rover Defender 110. Hobby grade, 2 speed, hardbody! (11 min 40 sec)


Great review by Tomley RC Garage
Posted by old4570 | Sep 18, 2019 @ 07:50 PM | 567 Views
no more

It's now a RC glider ..

https://www.banggood.com/100cm-Wings..._warehouse=USA

It's blowing a Northerly Gale at the moment ..

But early this morning I took it into the back yard for a quick and dirty CG check with a Zippy 350 .

It glided across the back yard like a dream and smacked the brick wall

I havent glued the motor , so no damage .

But looks very promising .

A-team Hannibal (0 min 15 sec)

Posted by JohnVH | Sep 18, 2019 @ 05:28 PM | 571 Views
Flight two on this twin EDF Fighter!
Freewing SU-35 FLIGHT TWO Twin 70mm EDF Thrust Vectoring Jet (5 min 48 sec)

Posted by QuadifyRC.com | Sep 18, 2019 @ 05:06 PM | 477 Views
I've recently completed my review of the happymodel larva-x and have also covered off
  • Setup
  • Custom PID tune
  • Custom filters
  • Durability tests
  • Comparison of onboard DVR to goggle DVR

It's a great little quad but there are some durability question marks around the motors in particular and as you can see in my review, Happymodel are already working on a response. That aside it's a great value, fast, nimble and very quiet ultra light micro 'toothphick' that is well suited to park flying and other environments.

Full review is here:

https://www.quadifyrc.com/reviews/happymodel-larva-x-review-setup-pids



.

Posted by aopen3434 | Sep 18, 2019 @ 10:55 AM | 1,386 Views
X8-RDM ENCODER BRUSHLESS GEARED SERVO MOTOR






X8 - RDM encoder Brushless geared SERVO Motor 32bit control power unit
This is NEW Driver board for BGC motor RMD-S and RMD-L, ONLY Difference is installed a different driver board with RS-485 industrial communication used for robot and other Automation. This motor is best for servo gimbals, turntables, robots. The motor have the same size and fixed holes, RMD-S and RMD-L servo motors are compatible with or BGC driver board.
RMD-S and RMD-L are based on RS-485 industrial communication ,the advantage is anti-jamming ability. (suitable for long distance transmission)and also the motor speed higher used for robot and

...Continue Reading
Posted by Master splinter | Sep 18, 2019 @ 04:15 AM | 1,495 Views
Im looking to purchase the VQ Beechcraft Baron 69″ Wingspan EP/GP Civilian version pm me if you have one to sell
Posted by rc38joe | Sep 18, 2019 @ 02:49 AM | 1,517 Views
Hiya Fellow Flyers:

The Annual Omahawks R/C Auction date has been set and the Hall is reserved for our next auction on Oct 13, 2019..

The Omahawks R/C Club is hosting a R/C Auction in Omaha (See attachment) @ Hobby Town Hobby Plex located at 10200 Scott Circle, Omaha, NE 68122 on Sunday October 13th, 2019.

Doors open at 7:00 AM CST, Auction starts promptly at 10:00 AM.

Information will be posted @ Clubs web site at: http://omahawks.org/ , check right navigational column.

Question contact Kevin Hyde at 402-670-8320

Food and Refreshments offer for sale, Admission is $5 kids under 14 are free.
Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,523 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:24 AM | 1,454 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:17 AM | 1,474 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by Jumper factory | Sep 17, 2019 @ 10:08 PM | 1,467 Views
T16 can control the helicopter
Posted by Hobby Details | Sep 17, 2019 @ 09:36 PM | 1,454 Views
Premium Allen Wrench Set - Black Gold 4pcs Big Handle
DTT02022A Hex1.5 x 182mm
DTT02022B Hex2.0 x 182mm
DTT02022C Hex2.5 x 182mm
DTT02022D Hex3.0 x 182mm
Titanium Tips
4pcs/set
Dia 20mm Handle, bigger than usual dia 18mm handle
Optional to change to with SAE(Inch) Hex or Ball Head Tips, same price
Wholesale Price please PM or contact me at: [email protected]
Posted by old4570 | Sep 17, 2019 @ 09:30 PM | 1,432 Views
https://www.banggood.com/custlink/DmvDLuaEWD = HappyModel 0802

Just came in the post .. Like 60 minutes ago .

1-2s , And it is sooo cute !

The 1103 pictured with it does not run , I have ordered another 1103 ( hope it gets here soon ) , the 0802 got here rather quickly ( Thanks BG ) .
I just got a 1s capable ESC so am looking forward to some testing ..
Just need some AAA carriers so I can mod my tachometer from button cell to 2xAAA .. ( Especially since I already butchered the Tach )

Wonder if this little motor will push the 450x micro wing ?
Some interesting tests to look forward too .. ( yes )

Super tiny only 1.9g
Double E-clip design, prevent Motor bell to flying off

Brand name: Happymodel
Item name: SE0802 1-2S brushless motor
KV: 16000KV, 19000KV 22000KV (option)
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Terminals: JST1.25mm
No.of Cells(Lipo): 1-2S
Wire length(include connector): 40mm
Posted by Jack Crossfire | Sep 17, 2019 @ 07:14 PM | 1,435 Views
Quite a shock when the fixture of Gootube recommendations for the last year, the one of a kind PZL-104 modified with a turbine & extra large landing gear was destroyed. He took off in a strong crosswind & got blown over. This is why there are maximum windspeeds for aircraft.



He provided 10 minutes of video of him beating himself up but showed very little of the wreck. His passengers miraculously survived without any injury. It must have been a very forgiving airplane for him to be so lethargic about the weather.


In another time, it probably could have been rebuilt with parts from another PZL-104 & another engine. He probably doesn't have enough money to do the job. He seemed to document at least some of the build process, so that's more than the Smithsonian had for rebuilding the Wright flier.
Posted by Thunder50BMG | Sep 17, 2019 @ 03:26 PM | 1,492 Views
BLACKTHUNDER QUAD

Just another fun project and I have been planning this configuration for a while. Not much to say for this is really a simple and easy build and you guys can build this with your eyes close.

This is just my version and it's really interesting and fun project and pretty powerful with 4S.



Close-up PIX:



MAIDEN :

BLACKTHUNDER QUAD * MAIDEN (6 min 16 sec)
...Continue Reading