-
Views: 203
Note the size difference at the tail pipe. The SPM kit will have a hollow 3" of depth (back to the rudder post) and include an inner exhaust tube. We felt the flush cut epp of the DAM T-33 tail pipe area looked rather crude. -
Views: 194
Notice the fuse to wing fillet - the SPM T-33 has a formed polycarbonate fillet that extends from aft of the wing to the LE of the intake fairings (close to 48" long!) The DAM T-33 required that you sand the convex and concave curvatures. -
Views: 263
In this shot, you can clearly see the width difference of the fuse and the scale size of the SPM tip tanks
Comments (0)
Add Comment
-
Views: 207
The cockpits are cnc routed and can accommodate a 1/7th or slimmed down 1/6th pilots. These pilots were made by buying the helmets from Amazon - search for 1/6th pilot helmets, the flight suit and gloved hands were from Monkey Depot - I made the bodies f -
Views: 178
Canopy has molded details and is secured with small screws to a formed canopy frame (black) that is secured to the fuse. -
Views: 204
Many of the ejection seats parts are cnc cut from ABS - other parts are typical styrene and ABS pieces from Evergreen or Plastistruct. Scale hex bolts are from Scalehardware.com -
Views: 169
We can provide the USAF nomenclature and stars and bars if desired. We use 3mil vinyl. -
Views: 191
Typical decals are available too.