JamDan's blog View Details
Posted by JamDan | Nov 19, 2019 @ 08:36 AM | 823 Views
For those curious, here are some pics of the installed 12mm lowered twin-motor mounts by MarkQ. The lowered motor mounts bring the center of thrust closer to the center of mass, resulting in better hand launching characteristics. I can confirm this is indeed the case after doing some test flights.

It can cruise at 39mph at 3.8amps - 4.1amps or 100mph at 40amps. So pretty good!

The mounts fit really nicely on the wing. A bit more aerodynamic than the earlier larger versions. I'm using the Brotherhobby 2806.5 1300kv Avenger motors with APC 8x6 or 8x8 props. ESC's were installed under the wing for added cooling. The ESCs are the 'T-Rex 60a'.

Here's a DVR video of how it handles:

FPV - Moorland Ambiance (10 min 48 sec)

Posted by JamDan | Mar 08, 2019 @ 03:14 PM | 1,597 Views
FPV - Relaxation (3 min 43 sec)

Posted by JamDan | Oct 13, 2018 @ 01:54 PM | 2,981 Views
My latest mid-range fast cruising quad build:

- Armattan Chameleon Ti 6" long range
- MB Primo 2208 2550kv Motors
- Spedix 30a
- 5.5" props (5552 Gemfan)
- TBS Unify HV 5.8ghz VTX
- Motolabs Tempest F4 Flight Controller (soft-mounted)
- TBS Crossfire Mirco
Posted by JamDan | Feb 25, 2018 @ 05:57 PM | 2,902 Views
Having a little fun with some nose art on my Mini Talon.

*Using HK covering film (ironed on).
Posted by JamDan | Feb 03, 2018 @ 04:54 AM | 2,674 Views
Check out this smooth camera pan mechanism

FPV - Horizon (3 min 6 sec)

Posted by JamDan | Dec 05, 2017 @ 03:01 PM | 6,541 Views
My finished 'Mini Talon' build. Below I've put together a build log with all components used. I'll post a maiden flight and build video shortly.
Build Log:

- X-UAV Mini Talon
- Sunnysky 2216 1250kv Motor
- Hobbywing 60a V4 ESC
- YGE Caps Type 7 (soldered on the battery wire just in front of the ESC).
- APC 8x6E Pusher Prop
- Eagletree Vector Flight Controller
- Eagletree V2 GPS + Compass
- Eagletree pitot tube sensor
- Eagletree current sensor
- 5.8ghz 600mw Immersion RC VTX (will update to 2.4ghz video after the maiden flight)
- TBS Crossfire Diversity RX (stock antennas)
- Multistar 4s 5,200mah battery
- GWS S125 1T 2BB 25 Tooth (pan servo)
- Emax ES08MA II 12g Metal Gear Servos (wings and v-tail)
- Foxeer Legend 3 HD cam
- HS1177 FPV cam
- DPCAV Cam Switcher (http://goo.gl/Nzf28q)
- 3mm clear laminate, with yellow and black Hobbyking covering film on top.
- Flytron V2 strobe Nav lights
- Upgraded control horns (http://goo.gl/FN8GDP).
- 1943g flight weight with battery.
- Also has removable v-tail mod.

All 3D printed parts are Mark Qvale's designs. Parts are as follows:

- Front and Rear Landing Skids
- Heavy Duty Pan & Tilt (flat mount + corresponding canopy)
- NACA Intake (mounted on top back)
- Motor Mount
- Mini Talon Component Trays (center and back)
- Battery Strap Holder (all in ABS plastic)
- Pitot Tube Mount

Here's a quick test flight:

FPV - Snow Surf (1 min 16 sec)
...Continue Reading
Posted by JamDan | Sep 21, 2017 @ 05:53 PM | 4,146 Views
My Mini Talon build log so far.

I laminated everything first with regular office laminate and then covered over that with Hobbyking coloured film. Very happy with the results so far. Feels very strong with the double layer.

*Still need to add film to the wings.
Posted by JamDan | Oct 04, 2016 @ 08:20 AM | 3,966 Views
Long range, low level flight I made with the TBS Crossfire. Very happy with the range performace!

FPV - Mountain King (2 min 45 sec)

Posted by JamDan | Aug 06, 2016 @ 11:19 AM | 6,615 Views
FPV - Long Green (2 min 35 sec)

Posted by JamDan | Apr 24, 2016 @ 12:41 PM | 4,930 Views
115kmp/h low level cruise

FPV - Land Hole (2 min 31 sec)

Posted by JamDan | Feb 02, 2016 @ 07:46 AM | 5,924 Views
Blackout B330 Layout Modifications

So I've had a few people message me about the layout modifications I've made to my B330. I've included some pics. As mentioned, my Naze32 is now mounted on the dirty plate under the clean plate. In my opinion this is a slightly better layout for the B330 as it gives you some advantages in handling and flight time with centre mounted bigger batteries.

- The FC is mounted on some small nylon washers with nylon screws holding it in place. You can see this on one of the images. It does not result in any vibration anomalies to the FC if it is tuned properly (PIDs at bottom).

- ESCs are mounted on the arms and connected to the outer dirty plate pads, not the inner ones. The inner ones are now under the FC. The FC is not touching the dirty plate, only the nylon washers. Your FC will need to have 'right angle' servo connectors to fit in without touching anything.

- The rubber spacers also have some washers under them to allow enough room for the FC.

- On the clean plate I have removed the firewall insert. You will need to do this to allow the 3300mah 4S 90C batteries to mount in the centre. This adds some risk to your forward electronics in crashes but the added benefits are worth it for me.

Total weight of the build without batteries is 798g.

Other things to note

- If you are running EZOSD like me you will no longer be able to mount the GPS receiver in the GPS hole on the clean plate, due to the battery. Instead I have it mounted on...Continue Reading
Posted by JamDan | Jan 29, 2016 @ 03:48 PM | 5,833 Views
Super smooth flying with this new gear installed. Love how it feels!

FPV - Winter Session (3 min 47 sec)

Posted by JamDan | Dec 09, 2015 @ 02:35 PM | 5,623 Views
Can't beat flying in the mountains.

FPV - Rocklake (2 min 29 sec)

Posted by JamDan | Dec 09, 2015 @ 02:33 PM | 5,631 Views
Found a new awesome place to fly!

FPV - Wildlands (2 min 34 sec)

Posted by JamDan | Aug 13, 2015 @ 04:32 PM | 6,461 Views
FPV - Shakedown Run (2 min 45 sec)

Posted by JamDan | Aug 13, 2015 @ 04:31 PM | 5,947 Views
Posted by JamDan | Jul 31, 2015 @ 08:39 AM | 6,610 Views
Posted by JamDan | Dec 03, 2014 @ 07:17 AM | 6,717 Views