BROKEN ENGLISH WARNING
little backstory first when i was 8 (i think) my parents bought me Silverlit picooZ DX1 (model number 85850) and it was so much fun but of course as a kid i lost it and never managed to find it again . My mom even said that i was crying like the sky collapsed on me. Couple of my friends found it without telling me anything about it and (as kids do i don't really blame them) they played with it (throwing it in the air and such) it got completely destroyed.
10 years later i found out his name and model number by accident while visiting Kiel in Germany (nice place btw) and to this day year later i wasn't able to find one or its parts at least. I admit i lost the battle and i cant find it so as a last attempt to bring my first ever remote flying aircraft back to life I am asking for your help.
I will accept anything from the helicopter canopy to the whole set (if possible) if you know someone that is selling show them this post.
currently i am searching for its canopy and main rotor assembly as a minimum while the rest of parts i can steal from Silverlit air striker
and don't hesitate to say the price and shipping cost i will pay for all
i managed to find the blog site and someone rewed exactly the same paintjob and tail helicopter here http://blog.splash.de/2010/06/17/picooz-dx-1/

you can email me directly on dragozunic1@gmail.com if you have some info

thank you in advance

so i bet u like quadcoptes so u probably know what brushless motor is i bought racerstar BR0703 brushless outrunner motors and they are tiny only 10 mm wide 1mm shaft and they are horrible i was mounting it and the wire simply fell off at that point i was ready to flip a table so if u wanna see me repair them just follow me into this repairing nightmare i cannot get a good pic on the stator how small it is

HERE WE GO
1. tools + soldering station+1mm drill bit
2. materials bamboo stick 14cm long 4.2mm wide or close to those sizes, 7mm long coarse thread(wood screw thread) screw 1.7mm wide, fine tooth screw 1.3mm wide any length will work
PROCEDURE
1. unscrew the mounting screws
2. cut or unsold er the wires
3. remove the propeller
4. remove the retainer
5. remove the rotor of the stator
6. remove the old coils
7. remove the mount
8. making the jig
9. winding the stator
10. gluing the coils
11. brake
im so close to rage quit 3 times i give all steps 3 times they do not upload and i have to start all over again RC Groups fix your...Continue Reading