Mad_angler1's blog View Details
Archive for April, 2016
Posted by Mad_angler1 | Apr 08, 2016 @ 11:57 AM | 40,221 Views
DJI Phantom 4 Firmware Update - Troubleshooting and common Issue Information Updated 08/12/2016

Please note this info is for the Phantom 4 only and not the Phantom 4 Pro, see the second post for info on the Pro


The Phantom 4 is available from DJI
http://click.dji.com/ewNB7_KlW2SdbyRy?pm=link&as=0001


Please Note: As with all my own blog post all links may be affiliate links and i will receive a small commission on any purchase bought through them , if you wish to support me then thank you however it is not expected .


Please note it is advised you do not update to the latest FW a minute - See Below Under Known Issues

Latest FW version for the Phantom 4

Craft v02.00.0106

Remote Controller v1.9.20


DJI Go & DJI Go 4

DJI has branched off its Go app into 2 versions, from this point forwards you should use the correct app for your model, while the later versions of the Go App V3.1 do support the Mavic Pro and P4 its advised to move over to Go 4.0 as per below.

Use DJI Go V3x for the following products
Phantom 3 Series
M100/M600/LB2

Use DJI Go 4x for the following products
Phantom 4 Series including the P4 Pro
Mavic Pro
Inspire 2



KNOWN ISSUES

FW V02.00.0106 POOR HOLD AND FLIGHT BEHAVIOUR

A number of users have reported poor flight performance and flight behaviour from this updates, this does not affect all users but its clear some are getting this after the update.

FIX: There is currently no fix
...Continue Reading