Over the last 2 months I have been testing and playing with the Herelink system from ProfiCNC thank to the guys over a www.3dxr.co.uk who have been able to get me one to take a look at.

My main thread on this product Is below as well
https://www.rcgroups.com/forums/show...-From-ProfiCNC



Over the last few weeks I wanted to look a range and how this system would perform, Herelink is stated to have a range of 20km and I wanted to put this to the test, as laws prevent me from flying this in the UK I came up with a number of tests over some coast line to see what the system was capable of doing.

The plan was to set the Air unit up on a cliff mounted to a tripod and a camera, I also mounted a full cube system to it as well to be able to get full telemetry and test the FC control over the distance as well.



For the first test I found an area with a clear 10km 6m stretch up the coast line, I placed the Air end on the cliff about 25-30m above seal level and the plan was to stop a verbose points up the coast as I traveled along.


...Continue Reading