Archive for November, 2015
Howdy people 
time for something a bit different then Yeah.. this video looks like a normal run-of-the-mill unboxing.. I know :P The setup is quite non-standard though
Can you guess what the experimental part of this build will be?
Link to the plane: 1100mm Sbach 342
Motor: Quadcopter motor
ESC: Quadcopter ESC
Servo's: Hitec HS-81MG
time for something a bit different then
Yeah.. this video looks like a normal run-of-the-mill unboxing.. I know :P The setup is quite non-standard though Can you guess what the experimental part of this build will be?
| DutchRC - HobbyKing Sbach342-1100 Profile 3D EPP - Unboxing! :) (8 min 59 sec) |
Link to the plane: 1100mm Sbach 342
Motor: Quadcopter motor
ESC: Quadcopter ESC
Servo's: Hitec HS-81MG
Comments (1)
Add Comment
Halloa people
I've got me another new plane here.. I picked it up in the Cyber Sales seepstakes :P
It's a small/medium sized foam slope soarer by HK..
Link to the plane: http://hobbyking.com/hobbyking/store...ml]Ridge Ryder
Specs:
Wingspan: 913mm
Length: 500mm
Weight: 175g (w/o battery)
Required:
2 Channel Transmitter and Receiver with elevon mixing
4.8~6.0 volt receiver battery or 2S 7.4V 800mah Lipo with UBEC
I've got me another new plane here.. I picked it up in the Cyber Sales seepstakes :P
It's a small/medium sized foam slope soarer by HK..
Link to the plane: http://hobbyking.com/hobbyking/store...ml]Ridge Ryder
| DutchRC - HobbyKing Ridge Ryder slope glider - Unboxing! :) (6 min 37 sec) |
Specs:
Wingspan: 913mm
Length: 500mm
Weight: 175g (w/o battery)
Required:
2 Channel Transmitter and Receiver with elevon mixing
4.8~6.0 volt receiver battery or 2S 7.4V 800mah Lipo with UBEC
Halloa people
for a video-quad project, I was looking for a GOOD 3D gimbal. This time not so much a budget-driven choise.. I just wanted something that workes well..
After quite a bit of research, I decided on getting the Feiyu Tech Mini3D..
Link to this gimbal: Link link link
In this first video I've tried to give you a good impression of what the gimbal does.. I will probably add more aerial video's to this thread once I have the video-quad all setup..
Link to the quadcopter Quanum XJ470: XJ470
Camera used Denver 8030W: Denver 8030W
Radio used Futaba T14SSG: Futaba T14SG
for a video-quad project, I was looking for a GOOD 3D gimbal. This time not so much a budget-driven choise.. I just wanted something that workes well..
After quite a bit of research, I decided on getting the Feiyu Tech Mini3D..
Link to this gimbal: Link link link
In this first video I've tried to give you a good impression of what the gimbal does.. I will probably add more aerial video's to this thread once I have the video-quad all setup..
| DutchRC - Feiyu Tech MiNi3D 3 axis Gimbal - Review! (12 min 19 sec) |
Link to the quadcopter Quanum XJ470: XJ470
Camera used Denver 8030W: Denver 8030W
Radio used Futaba T14SSG: Futaba T14SG
Howdy people
Sooo.. I've waiting for the JJRC X1 to become available for a while now.. A Brushless quad in the Dromida / Vista size I think if it has been done right, it might be the end of us farting around with geared brushed quads?
Link to the quad: JJRC X1
Has anybody seen it being available anywhere yet?
Cheers from the netherlands
Sooo.. I've waiting for the JJRC X1 to become available for a while now.. A Brushless quad in the Dromida / Vista size
I think if it has been done right, it might be the end of us farting around with geared brushed quads? Link to the quad: JJRC X1
Has anybody seen it being available anywhere yet?
Cheers from the netherlands
Halloa people
I came across this small little FPV monitor that you'd attach to your (sun-)glasses, and then have an FPV monitor for 1 eye:
Link to the display: Click click click
What are Your thoughts on that? I really wonder if everything ellse you see wouldn't be to distracting.
It would offcourse be far from emersive, but I guess that's not the point.. It might be usefull if you just use FPV to line up shots..
Hey! You can be your own spotter with this!
And.. maybe people here have allready tried this one?
Cheers!
DutchRC
I came across this small little FPV monitor that you'd attach to your (sun-)glasses, and then have an FPV monitor for 1 eye:
Link to the display: Click click click
What are Your thoughts on that? I really wonder if everything ellse you see wouldn't be to distracting.
It would offcourse be far from emersive, but I guess that's not the point.. It might be usefull if you just use FPV to line up shots..
Hey! You can be your own spotter with this!
And.. maybe people here have allready tried this one?
Cheers!
DutchRC
Hello people
I picked up this affordable Eachine 800TVL FPV set with 600mW VTX, to see if it was any good
In this video I'll unbox it and give you some tips & info.
Link to this FPV set: Eachine 800TVL CCD FPV set
I'll do a more in depth review of it after having used it a while..
I picked up this affordable Eachine 800TVL FPV set with 600mW VTX, to see if it was any good
In this video I'll unbox it and give you some tips & info.
Link to this FPV set: Eachine 800TVL CCD FPV set
I'll do a more in depth review of it after having used it a while..
| DutchRC - Eachine 800TVL CCD 600mW FPV Set - Unboxing + Tips & Tricks! (8 min 35 sec) |
Hi there people
another Unboxing and build video of a plane! HobbyKing's Flybeam this time.. A pretty normal looking plane, but it's got a LOT of LED's on it
Specs:
Wingspan: 1092mm
Length: 898mm
Flying Weight: 1120g
Motor: 4018 950kv
ESC: 30A w/BEC
Servo: 9g x 4
Link to the plane: http://hobbyking.com/hobbyking/store...92mm_PNF_.html
another Unboxing and build video of a plane! HobbyKing's Flybeam this time.. A pretty normal looking plane, but it's got a LOT of LED's on it
Specs:
Wingspan: 1092mm
Length: 898mm
Flying Weight: 1120g
Motor: 4018 950kv
ESC: 30A w/BEC
Servo: 9g x 4
Link to the plane: http://hobbyking.com/hobbyking/store...92mm_PNF_.html
| DutchRC - HobbyKing Flybeam Night Flyer - Unboxing + Build! (29 min 10 sec) |
