All finished and flying....Turned out to be a very nice little plane to fly.
No trim changes straight off the board.
AUW 643gms.and take off is in about 30 ft. Cruise around on half power and fly for 8 minutes.
Done with my usual materials,of white foam and news print covered,depron,carbon fiber and the odd bit of light ply and balsa.
Scaled up off a peanut drawing to 36 in w/s
Powered by a Turnigy 1050 kv motor&18 amp ESC,3 x HXT 900 servos,and 1300 3s lipo.