Ling08's blog View Details
Posted by Ling08 | Sep 29, 2019 @ 03:54 AM | 824 Views
WoW, WoW, WoW....Share good news from the HGLRC Company.
Big big Promotion --Chinese National Day.
Attention to them for a long time, jajajaja...

Order over $50: FREE shipping
Order over $100: FREE shipping + 10% off
Order over $300: FREE shipping + 20% off
From October 1 ~ October 5, 2019 UTC+8
Posted by Ling08 | Aug 30, 2019 @ 01:05 AM | 805 Views
Do you like it?
Posted by Ling08 | Aug 26, 2019 @ 09:04 PM | 1,924 Views
Forward 65A ESC Specs

Input Voltage: 3S 6S
Current: 65A Continuous, 75A Burst
BLHeli_32 Firmware
Built-in Current Sensor
Supports ESC Telemetry
ESC Protocol: Oneshot, Multishot, DShot1200
Dimension: 46x45x6mm
Weight: 23.3g 24.1g (a tiny bit heavier than advertised)
No 5V BEC


It comes with the following accessories, pretty standard stuff:

Forward 65A 4in1 ESC
10cm 12AWG slicone wires
XT60 battery connector
5cm ribbon cable
1000uF 35V of unknown brand
Rubber grommets, nylon standoffs and nuts (M3)
Stickers


For more review, welcome to visit below :


http://bit.ly/2ZwpMyQ.
Posted by Ling08 | Aug 17, 2019 @ 03:51 AM | 614 Views
Item name: FD1103 8000KV / 10000KV Brushless Motor
Motor: 8000KV/ 10000KV
Stator Diameter:11mm
Stator Thickness:3mm
No.of Stator Arms:9S
No.of Rotor poles:12P
Motor Resistance:330mΩ
Max Continuous Current:5.46A
No.of Cells(Lipo):2-3S
ESC:6A
Recommended Prop(inch):2.5 Inch
Wire type:28AWG x 40mm
Weight:4g
Posted by Ling08 | Aug 16, 2019 @ 09:31 PM | 626 Views
Come on...guys...
Posted by Ling08 | Aug 08, 2019 @ 08:13 PM | 770 Views
Feature:

1. 2.4Ghz band width
2. Real time data reading and 0.95OLED display
3. Support 3 speed modes
4. cruise control mode
5. Remote and E-skateboard power indication lights
6. Rechargeable Li-ion Battery
7. Wrist strap
8. Battery last for 12 working hours
9. Product size: 140.5*64.5*32.5mm.
10. Net Gross: 90g.
Posted by Ling08 | Aug 05, 2019 @ 10:02 PM | 980 Views
Get a new product.

16*16mm esc use for mini rc drone.

It's powerful
Posted by Ling08 | Aug 02, 2019 @ 01:11 AM | 1,464 Views
Hybrid Frame Design
Flight control installation damping system
TPU Antenna Mounts
Capacitor mounting slot
Camera mounting size support 19x19/22x22mm


Material: 3K Carbon Fiber
Top plate thickness: 2mm
Bottom plocte thickness: 2mm
Middle plate thickness:2mm
Camera side panel thickness: 1.5mm
Arm Thickness: 5mm
Arm width : 10mm
Top and middle plate spacing: 25mm
Installation holes: 20x20/30.5x30.5mm
Support camera: 19x19/22x22mm

Support Battery: 4S 1500mAh ~ 6S 1800mAh
5inch 6inch 7inch is available ....
Posted by Ling08 | Jul 29, 2019 @ 09:03 PM | 1,949 Views
Welcome all the fans post your answer.....