CarreraGTSCS's blog View Details
Posted by CarreraGTSCS | Nov 06, 2019 @ 09:14 AM | 513 Views
Posted by CarreraGTSCS | Oct 14, 2019 @ 06:00 AM | 3,664 Views
Posted by CarreraGTSCS | Sep 24, 2019 @ 04:21 PM | 1,074 Views
Posted by CarreraGTSCS | Aug 19, 2019 @ 06:30 PM | 1,542 Views
I was at Bethel over the weekend with my flying buddies at the Golden Age Air Museum Air Show and RC Meet and saw a plane that I'd been quietly lusting after for a couple of years after seeing it for sale at the CPAA Lebanon Swap Meet. Well there it was over by Zeke's Park Scale Models booth. Met the owner, Dave, very nice guy and we talked about the story behind the model (I'll tell that one in the rebuild thread. Great story!!) and negotiated for a little while. We eventually came to a number that made us both happy and I was the proud new owner of a Duncan Hutson DeHavilland Tiger Moth in 1/4 scale all done up in fabric and painted in a beautiful and striking red and cream . Very well detailed and not at all heavy. Tacon Bigfoot 110, Castle Phoenix Edge 100, Hitec HS-5665 MH servos. It's a nice 8s set up. I swapped out the 20x8-14 prop for a more efficient APC 18x10 electric prop and put in two 4s 5000mah lipos in series. Made a bit over 1700 watts. AUW was right around 17 lbs. Took my time assembling it at the field and did my usual preflight checks (I will be adding a few things to the checklist going forward!) and taxied the Tiggie out to the far end of the field. Taxis very nicely and tracks well. I released back pressure on the elevator too soon and the first take off attempt ended after a few feet in a slow nose over. I walked out to her and set her back down and gave her a once over. Looked ok. I decided to stand behind her and take of from where I was since I was...Continue Reading
Posted by CarreraGTSCS | May 02, 2019 @ 01:15 PM | 1,980 Views
Easily calculate to any scale without pulling out the calculator.
Posted by CarreraGTSCS | Apr 07, 2018 @ 08:14 PM | 9,484 Views
I like this guy's sense of proportion.
Posted by CarreraGTSCS | Jul 21, 2015 @ 08:47 AM | 15,619 Views
This is what has all of my attention lately:

Mike K- Ninja 250 at NJMP (1 min 0 sec)

Posted by CarreraGTSCS | May 02, 2014 @ 02:16 PM | 17,935 Views
Found this here on RCG:

Plug one side of the elevator into the ELEV channel and the other side into the AUX 3 channel. Go to System Menu and choose Wing TYPE. Jog over to the Mate line under ELEV and push the roller. A box will appear with 4 choices: GEAR, AUX2, FLAP & AUX3, choose AUX3. You have just mated the AUX3 channel with the Elevator channel; the radio will now automatically refer to these channels as REL (right elevator) and LEL (left elevator) in all menus.
Posted by CarreraGTSCS | Jan 10, 2014 @ 10:19 PM | 18,777 Views
20x12 XOAR
22x8 Dynathrust
22x12 XOAR
22x14 Zinger
23x13 Turnigy
24x10 XOAR
24x13 Turnigy
26x13 APC e