HK450 Pro kit
Turnigy(Suppo) 3550KV motor
YEP 40A ESC
HK933(Henge) cyclic servos
Turnigy 306 Tail
Tarot belt tail
Tarot FBL head
Yellow kbar
Flysky Rx
Align gears and boom
Turnigy blue 2200mah 20C 3S
Tarot 325mm wood main blades, plastic tail blades

06/2016
Got the NX back in flying shape and gave it some exercise today.
Specs:
Pro 3D rotor blades 550mm 50mm chord
Main blade root 12mm Bolt hole 4mm
stock plastic 73mm tail blades
2/19/17 Gartt 550/600 FBL head, Align dampers
Cyclic servos: Hitec HS-5485HB 6.4 kg/cm 0.17sec at 6V
2/25/17 tail servo BlueBird 661
Motor: Century Lighting 600 CNE272 715KV
Motor info: RCG Century Swift thread post #2148
Lightning Outrunner 600
Specifications:
RPM/Volt (KV): 715
Max Voltage: 30.1 (8C)
Max Amps: (A) 55 (20 Sec)
Max Watts: (W) 1,000 (Cont.)
Max Watts: (W) 1,200 (20 Sec)
Efficiency: 85%
Max RPM: 20,000
Weight: 295g
Length: 80mm
Diameter: 43mm
Shaft Diameter: 5mm
Shaft Length: 15mm
Cooling System: Turbine Style Included
ESC: Turnigy 85A Product ID: Tz85A
Pinion 5mm shaft mod1.0 14T
Main Gear: Swift 96T
Lipo: Turnigy blue 6S 20C 5000mah
Tx: DX8 Rx: lemon DSMX sat
4S:
Mr Mel HS: approx.1500rpm
Optical tach HS: 1700rpm@4.1V 1585rpm@3.75V
6S:
6.6lbs with 5000mah 6S 20C

Mods: Align/HK550 landing gear, Align 700 skid pipes
old parts replaced:
Tail Servo: Turnigy 1209HP
NX flybar head(plastic rotor hub and grips)
TGZ380 FBL tail-only mode
Spectrum AR6110E

2/19/17
repaired crash damage, removed NX FB head, fitted Gartt FBL head,new black main gear, tail case, tail shaft, removed TGZ380 and fitted kbar gyro and lemon sat.

2/20/17
flew this dino again today, but with a little extra caffeine. went from 4S to 6S, much better.
For...Continue Reading