Posted by montis | Aug 20, 2019 @ 04:54 AM | 454 Views
Eachine probably has the largest range of various FPV video transmitters. Ranging from nano sized Eachine Nano VTX to long range Eachine TX806. One of the most popular VTX is Eachine TX805 (Read the review of Eachine TX805 VTX here ). It is stack mountable VTX with high power output. Recently Eachine released the newer version of TX805S with even more power output - up to 1600mW!

Eachine TX805S specifications:
Input voltage: 7V to 24V
5V camera supply: 220mA(MAX)[email protected](Type)
5V camera supply: 470mA(MAX)[email protected](Type)
5V camera supply: 550mA(MAX)[email protected](Type)
5V camera supply: 830mA(MAX)[email protected](Type)
Extra features: Smart audio
Power supply: 5V output for Camera
Output power: 25mW/500mW/1000mW/1600mW switchable
Antenna connector: MMCX
Cable connector: Solder pads
Dimensions: 36mm*22mm*5mm,30.5 stackable hole
Weight: 11.3g (excluding antenna)

* Support 0.01mw Parameter-adjusting Mode.
* 25mW, 500mW, 1000mW and 1600mW power switchable.
* One button frequency and power setup.
* OSD configuration using smart audio.
* Onboard mic.

Inside the box there is only the TX805S itself, MMCX to SMA pigtail, MMCX linear antenna and the instructions leaflet.

There is a large heatsink on the top PCB side. We can expect it heating up greatly as it needs additional heatsink.

Closer view of the back side of the PCB.

...Continue Reading
Posted by dmrcflyr2 | Aug 20, 2019 @ 03:47 AM | 505 Views
Why? Because it is too cool not to share. It is my pride and joy engine now fitted with a McDaniel 474 glow driver system.

OS FF-320 Pegasus Cool Power MV 15% 4 Stroke run (4 min 10 sec)

Posted by Late99 | Aug 20, 2019 @ 02:20 AM | 523 Views
We made a weekend trip from Finland to Wings over Europe event in the north France to visit a bit bigger venue than our local events. Also wanted to see Jase Dussia flying live. No personal flying though, as we flew to Brussels and just took car rental to get to the Maubeuge airfield and couldn't carry any planes with us.

We arrived Friday evening just to catch some of the last demos and spent Saturday on the site. On Saturday the weather was rainy, but I think that helped Aerobertics sales as people kept drooling at the display planes and fortunately the weather allowed key demos to be flown.

I took plenty of pictures on site, please go see the full gallery!

The event had to be the biggest concentration of Extreme Flight planes in Europe at the time!
Posted by Martin Zhuang | Aug 19, 2019 @ 10:38 PM | 513 Views
HGLRC FD VTX Micro 16X16mm 400mW

Item Name: FD VTX Micro
Output Power: PIT/25mW/100mW/200mW/400mW Switchable
Control Mode:BF OSD Control(RX)/Button
Input Voltage: DC 5V
Output Characteristic:
Installing Hole: 16x16mm, M2
Size: 20x20mm
Antenna: IPEX
Weight: 1.5g

Get yours here:
Posted by RADIOLINKRC | Aug 19, 2019 @ 09:52 PM | 511 Views
Our latest launchedT8S isREADY TO ROCK !

With the super light weight of 142g , T8S has the brilliant communication performance as excellent as AT9S and AT10II and is perfectly handy for all kinds of models including Fixed Wing, Gliders, Multicopter, Cars and Boats.
  1. 2000m of Control Distance in air(with Radiolink R8EF receiver)
  2. Parameters Setup with Android APP
  3. SBUS/PPM/PWM Signal Output Supported
  4. Adapts to Multiple Models(Plane/Racing drone/Rc car/Rc boat )
  5. Programmable Mix Control
  6. Ergonomical Design with Small Dimension (162.5*95.5*57mm)
Follow our AliExpress Official, screenshot and contact the seller, you will geta $2 coupon for T8S !

More details please visit

Posted by CarreraGTSCS | Aug 19, 2019 @ 06:30 PM | 749 Views
I was at Bethel over the weekend with my flying buddies at the Golden Age Air Museum Air Show and RC Meet and saw a plane that I'd been quietly lusting after for a couple of years after seeing it for sale at the CPAA Lebanon Swap Meet. Well there it was over by Zeke's Park Scale Models booth. Met the owner, Dave, very nice guy and we talked about the story behind the model (I'll tell that one in the rebuild thread. Great story!!) and negotiated for a little while. We eventually came to a number that made us both happy and I was the proud new owner of a Duncan Hutson DeHavilland Tiger Moth in 1/4 scale all done up in fabric and painted in a beautiful and striking red and cream . Very well detailed and not at all heavy. Tacon Bigfoot 110, Castle Phoenix Edge 100, Hitec HS-5665 MH servos. It's a nice 8s set up. I swapped out the 20x8-14 prop for a more efficient APC 18x10 electric prop and put in two 4s 5000mah lipos in series. Made a bit over 1700 watts. AUW was right around 17 lbs. Took my time assembling it at the field and did my usual preflight checks (I will be adding a few things to the checklist going forward!) and taxied the Tiggie out to the far end of the field. Taxis very nicely and tracks well. I released back pressure on the elevator too soon and the first take off attempt ended after a few feet in a slow nose over. I walked out to her and set her back down and gave her a once over. Looked ok. I decided to stand behind her and take of from where I was since I was...Continue Reading
Posted by LemonC | Aug 19, 2019 @ 04:35 PM | 933 Views
My new youtube buddy Josue FPV has been helping me get my tune a little better, still needs work as do my Juicy skills, but anywho more digital garbage for looking upon...

Quick AM Flight (2 min 56 sec)

Running a TBS Source 1 v2 with v3 arms (they're holding up quite well i guess).

2306 2450 iflight motors, heavy ass quad 705g (has a hero 7 on it w nd4 filter), hq 5x4.3x3 props.
Posted by Xemulxe | Aug 19, 2019 @ 04:07 PM | 905 Views
I completed the anchor winch. I had to bother a little with the clutch, because the depth on the river is up to 6-8 meters, and while you drop anchor with a gearbox, you can swim to China.

ps Captain Rickson accepted the job

Anchor winch with clutch for rc fishing boat "River spirit" (2 min 17 sec)

Posted by basslord1124 | Aug 19, 2019 @ 01:46 PM | 915 Views
So decided to go for a Dexter themed blood spatter type paint job on the foamboard FT Bloody Baron. I put little dabs of paint on the prop and fired her up to see if that would fling the paint onto the plane. I also had a backup plan where I would put paint on a brush and flick that at the plane. The end result came out pretty cool. Check it out!

FT Bloody Baron "Dexter" paint job...A cool approach to painting a foamboard RC plane (4 min 19 sec)

Posted by Deserteagle | Aug 19, 2019 @ 12:02 PM | 969 Views
This is the mods video
Part 2 Emax Tinyhawk Freestyle MODS!! finally (18 min 48 sec)

Posted by Suko | Aug 19, 2019 @ 12:01 PM | 956 Views
When I first got my Spektrum Dx6i years ago, I found that learning to use the "new" computer radio was a daunting task. So many options and settings and figuring everything out took forever. Even once I figured out what settings I needed, I quickly discovered that it was incredibly time consuming to set up each new airplane model I had one at a time. When I upgraded to the new Spektrum Dx6 (black transmitter), I told myself that I was going to standardize everything and make a tempalte file. That way, whenever I got a new plane, all I had to do was copy the template, reverse a few servo directions and be ready to roll. It's been a few years now and I feel like this was a fantastic idea and I want to help other people out by sharing my methods.

I have made a video of this process for people to watch. But I recommend also reading through these directions here if you have trouble.
Spektrum Tutorial: How to Setup a Model Template (21 min 40 sec)

First off, why do this?
As mentioned above, it's a huge time saver. Not having to set up dual rates and your switch positions for EVERY model in your hanger is very convenient. However, there's also the benefit of having each and every plane share the same switch positions. My plane's landing gear switch is ALWAYS in the same place, as are my flaps and my High/Med/Low rate switch. Having a standardized switch layout means that in an emergency, you know what switches you need to hit without needing to think about it....Continue Reading
Posted by cdeaglejr | Aug 19, 2019 @ 10:46 AM | 976 Views
Pictures of my latest quadcopter build.

Parallax ELEV frame with The Cube flight controller, DJI E310 propulsion system and FrSky radio and telemetry.
Posted by PittSpecial | Aug 19, 2019 @ 08:29 AM | 1,117 Views

Well, to me I got a super deal locally from a former co-worker (retired) and who sold me this GEM!

It is a Vintage Carl Goldberg Jr. Falcon! He came with three spinners to choose from, all for a cool $75 US Cash and delivered to my RC Club on Sunday morning!

Can't get better than this! The Kit is brand new and in super shape!

Thank you Peter!
Posted by Pierre_de Loop | Aug 19, 2019 @ 07:57 AM | 1,116 Views
This hasn't been the best summer at our house. Departures at work and my father's health consumed just about all of our time. Nevertheless, earlier this month I made my first trip back into the workshop and began repairing the Kadet. Small task by small task, I was able to get it back into shape and carve out a few hours to test it this past Saturday; my first such outing since May 4, pictured below.

The Kadet flies as beautifully as ever. I made a few small changes, like moving the radio forward , but everything else remains the same. I also put a short flight on the Slow Poke. It was obvious I'd not been flying for a while!

If nothing else, I met my goal.
Posted by AGFrc Nicole | Aug 19, 2019 @ 03:28 AM | 1,211 Views
AGFRC creats a new programming software to read and edit the data of servos.
Very user-friendly, please see the picture
Only need to combine the servo and USB Link to computer, then all the data is up to you !
Posted by UnknownForces RC | Aug 19, 2019 @ 02:17 AM | 1,257 Views
4WD REAR AXLE TRUCK (0 min 9 sec)

Posted by Wendyyyy | Aug 19, 2019 @ 02:17 AM | 1,161 Views
Want to find spare motors for your micro Toothpick or whoops? HGLRC is another choice! 😀😀😀

Check these 1103 8000kv/10000kv options. Find it here: