Posted by Warbirds65 | Dec 06, 2019 @ 08:36 PM | 3,000 Views
Removed some old monokote covering from this plan and recovering with Oratex I picked up from Balsa USA. The reasons for removing the old covering, I had some minor wing damage from handling the plane and picking up the wings, and the covering would tighten up any more like it use to. So I decided to just recover the whole plane. I am going back with the same color scheme as was on it going to add some other graphics. I have been researching the internet and looking at RC Decals for ideas. The whole plane is white including the top of the wings the bottom of the wings are yellow on the left and orange on the right wing. The elevator and rudder are going to covered in a yellow and black checkered pattern like the old P-47 that use to be sold by Top Flight .


The body of the plan is 48 inches and the wings are 64 inches and it is a profile plane, I am not sure of the manufacture I did purchase this plane from a gentleman on this site 10 years ago. So when I made the decision to redo the covering it was a tuff one for multiple reasons. 1 I have never recovered a whole plane before, 2 If I [email protected]#$ it up I might lose a plane I really enjoy flying. If anyone reads this and thinks they can ID the plane that would be helpful.
Posted by UpNup | Dec 06, 2019 @ 08:12 PM | 2,958 Views
This is my second build with Monokote. My P-51B uses 2 rolls of Olive Drab, 1 roll Gray, and some White. I thought about painting white, but was satisfied with white.

Update: The day after posting this blog, I learned that Monokote makes a FLAT olive drab! Now, I bought not one, but two rolls from my LHS and he mentioned nothing about a flat finish version. And at least online it looks to be a lighter color that what I’m stuck with. Beware your LHS I guess is today’s lesson!
Posted by jetpilotrich | Dec 06, 2019 @ 08:00 PM | 2,775 Views
This is one of the greatest and most fun planes to fly I have flown in a while!!!

FMS RANGER 1800MM Maiden Flight Demo and Review By: RCINFORMER (26 min 40 sec)

Posted by Deserteagle | Dec 06, 2019 @ 06:24 PM | 2,714 Views
This is actually a very nice little quad that is docile on 2s and really well done for 3s/4s also a
10% off coupon in the description

TYRO89 COMPREHENSIVE BUILD AND REVIEW GUIDE 10%off coupon (34 min 10 sec)

Posted by Reckless_fpv | Dec 06, 2019 @ 05:16 PM | 2,765 Views
Quick yeet! 🔥
Abominable FPV Freestyle (3 min 55 sec)

Posted by bill_delong | Dec 06, 2019 @ 03:29 PM | 2,788 Views
I saw someone recently ask the question, what parts are needed to convert an SCT410.3 into a MT410 and for how much?


Having an SCT410.1 myself, I have been tinkering with the idea of doing the conversion as well, so let's take a look and see what it will take. Note that I have not made the conversion myself, this is just a guess of what I think will be required based on cross referencing parts off the product pages:


$15 - TKR5424 – Turnbuckle (steering links, 2pcs, MT410)
$15 - TKR5194 – Spindle Carriers (trailing, 15 degree, L/R, EB/NB/ET/NT)
$14 - TKR5193 – Spindles (trailing, L/R, requires TKR5194, EB/NB/ET/NT48, EB/NB.3)
$12 - TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)
$5 - TKR6145 – Shock Boots (for 137mm shocks, 2pcs)
$60 - 2 x TKR5472 – Driveshafts (front/rear, hardened steel, 2pcs, ET48, NT48)
$12 - TKR6061 – Shock Shafts (for 137mm shocks, steel, 2pcs)
$30 - 2 x TKR5451 – Turnbuckle (camber link, front, 2pcs, ET48, NT48)
$30 - TKR6060 – Shock Body (for 137mm shocks, aluminum, hard anodized, 2pcs)
$12 - TKR6081 – Shock Spring Set (rear, 1.6×10.0T, 90mm, green, 4.20 lb/in)
$18 - TKR5436 – Suspension Arms (front, 2pcs, ET48, NT48)
$18 - TKR5430 – Suspension Arms (rear, 2pcs, ET48, NT48)
$30 - TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, 2mm offset, w/pins, 2pcs)
$15 - TKR5116 – Wheel Nuts (17mm, serrated, gun metal anodized, M12x1.0, 4pcs)
$40 - 2 x TKR5070 – Stub Axles (hardened steel, 2pcs)
$12 - TKR5055A – Arm Bushing (aluminum, hard anodized, 4pcs)
$12 - TKR5054A – Spindle Bushings (aluminum, hard anodized, 4pcs)
$35 - TKR5029 – Shock Tower (rear, 7075 CNC, gun metal anodized)
$35 - TKR5028 – Shock Tower (front, 7075 CNC, gun metal anodized)
$14 - TKR40007K – Battery Straps (black, 4-6 cell)


Total = $436


New MT410 Kit = $450

Here's an alternative:

Tekno Custom SCT410.3 Mini MT410 Run VIdeo #3 (16 min 16 sec)

Posted by SKnackert | Dec 06, 2019 @ 11:04 AM | 2,763 Views
Hi All,
I am looking for Multiplex Stunt Master.
I have new batteries but no plane to use them with.
Thanks,
Steve
Posted by TinkleWid | Dec 06, 2019 @ 06:20 AM | 3,019 Views
"Dreaming of an Infinite Decaying Reality"

"Dreaming of an Infinite Decaying Reality" - Sam Kolder Transitions Inspired....but on a budget 😊 (3 min 0 sec)


The "Impossible Bando" - Dreamy transitions
Making the most of my 3 inch drone tiny hd camera! Inspired by Sam Kolder's latest drone video (thank you). First time creating Adobe masks with not a lot of flight footage due to the bad weather; 8 lipos/1 location/ 1 long phone call from my mum 😊 Had lots of fun making this and went for a fpv freestyle drone video cinematic feel at 24FPS. Hope to make another video if we get another dry day in the UK this year!

If you think of a better name for this video let me know and I may use it 🙂

--------------------------------------------
Equipment Used:
NEW BACKPACK: https://www.banggood.com/custlink/3D3KZIHHRP

Armattan Gecko 3 INCH fpv drone: https://www.armattanquads.com/gecko-3/
Caddx Ratel Starlight Camera: https://www.banggood.com/custlink/3m33VyzOW2
Caddx Turtle v2: https://www.banggood.com/custlink/DDmmPAUn4K
Receiver to replace bulky HGLRC TX20 VTX: https://www.banggood.com/custlink/mDGDHEzopf
NEW Lumenier AXII Long Range: https://www.banggood.com/custlink/vGDKjUcjgC
Gemfan 3052 https://www.banggood.com/custlink/m3v3VNUn4U
XM+ : https://www.banggood.com/custlink/3DmGFNqsBw
VRD2 Pro Goggles: https://www.banggood.com/custlink/KDvmHAUnsR
Brotherhobby Tornado T1 1407 4100KV https://www....Continue Reading
Posted by old4570 | Dec 06, 2019 @ 04:15 AM | 3,018 Views
Bush league to assemble , glue !
Foam is soft and can warp when gluing in the spars , put it down on a flat surface .

As pictured = Foam bits glued together / no hardware !

Weight is right on the nose of 60 grams .

So the plan still remains to make this FPV ..

Motor will be the 1306 ( This one )

240 + grams of thrust on a 5x3 is plenty overkill . ( 2s )

CG is slightly rearward as is at the moment .. I will wait for the glue to dry and then try locating the CG with some weights before I start bolting on hardware .
Posted by sniperxnl | Dec 06, 2019 @ 03:53 AM | 2,824 Views
I want to show you guys that i make now nice big longrange packs for all kind of planes and quads
I already made for some people

see the pics from the builds from last weeks


If you want a pack, just send me a pm or email to [email protected] with your quastions
Posted by Nick Akerson | Dec 06, 2019 @ 01:48 AM | 2,795 Views
We know that drones can achieve military exploration, long-range strikes, intelligence gathering, etc., and what role do they have in the civilian field? First of all, we must know that drones are a relatively broad concept, not just limited to drones. There are also self-driving cars. Since drones are so large in large fields, what kind of benefits can drones bring to us in the civilian field? Let me introduce them to you below.

Agricultural

In agriculture, drones can observe crop growth and harvest, spray pesticides, fertilize, and plant seeds. For animal husbandry, agricultural drones can also be used to monitor animals and collect animal data.

Construction company

In terms of construction, inspection drones can realize project monitoring and supervision, and can at a glance understand the progress of the project, just like a contractor, maybe the future drones can also replace the workers to achieve engineering construction.

Express industry

In the express delivery industry, express drones can already be delivered to your door. Although the current drone's load capacity is not strong, express drones are still a very promising application, especially in those areas with inconvenient traffic or dangerous areas such as mountainous areas. .

Environmental aspect

Drones can be used to monitor the ecological environment, and can also monitor animals without disturbing them, and contribute to the protection of nature.

Internet media

In the past,...Continue Reading
Posted by alex_nikiforov | Dec 05, 2019 @ 11:58 PM | 2,695 Views
Foxeer Falkor 2 1200TVL FPV Camera 2.1mm Global WDR Freestyle Long Range for FPV Racing RC Drone

Foxeer Falkor 2. Максимальная детализация. (8 min 43 sec)


Link: http://bit.ly/2MTXwCT
Posted by old4570 | Dec 05, 2019 @ 10:53 PM | 2,589 Views
Some stuff came this week ..
Eachine Tx06 FPV cam / tx
Nx3 Gyro flight stability ...

All should be relatively light ,
I might go with that 800mm Wing .. The Bee 590 looks like it will get crowded really quickly .

Swallow 800mm Wing ..
Pictured = glue drying ...
Wow this wing warps easy ( soft foam ) , hopefully those flashlights will help it dry straight .. ( I hope )
Posted by phyngineer | Dec 05, 2019 @ 10:33 PM | 2,065 Views
 Surveying and mapping drones are now used in many areas of work. We can see that people have developed a variety of different functions in urban management, and also brought everyone to the construction and management of the city. A new way, let's take a look at a few main scenarios of drone applications.



I. 3D modeling

Mapping and modeling are the strengths of drones. Through fast and detailed multi-angle mapping, people can effectively help people quickly model cities in three dimensions, which can effectively help cities to effectively manage all aspects of the city. , And can also achieve very high accuracy, ensuring that 3D modeling is accurate and comprehensive, and no low-level errors occur.

 2. Traffic Management

The mapping drone can also play a strong role in urban traffic management. We can see that because the drone travels in the air, it can reach the scene more quickly when there are some traffic jams and inconveniences. For on-site scanning and image transmission, you can also use the drone's communication function to better guide on-site personnel to perform correct operations, so that traffic management issues can also be greatly assisted.
    
Project Construction
    
Now in engineering construction, you can also see the mapping of drones. Because drones have now universally used digital surveying and mapping technology, which has overcome many traditional problems, it can now also be powerful in engineering construction. The practicality of the project can provide effective data help for the perspective of the project and the construction situation so that everyone can have a better experience in these aspects.
Posted by BDOG1 | Dec 05, 2019 @ 09:38 PM | 2,171 Views
Wind again from the right direction
forecast called for 15/16 mph and ramping down
When I got to the top at 2:30 I found steady 28 with pulsing sustained gust in the mid 30's
If I had know I would have brought heavier ships..
I flew my 30"12 oz Sizzle for 45 minutes - a amazing little wing ! see {https://www.rcgroups.com/forums/show...16-GEMS-Sizzle }
I had snow squalls blowing over that limited visibility ,really had to concentrate to keep it in site and not get blown over the back
Next I put my Parkzone Ka -8 up , the wind had subsided to the mid to high 20's most of the time ,blasted around with it for the next 45 or so minutes
When it started to get dark I landed and headed home - a Great way to end the day
Posted by Reckless_fpv | Dec 05, 2019 @ 08:35 PM | 2,067 Views
Posted by jmxp69 | Dec 05, 2019 @ 10:51 AM | 2,524 Views
If you're in need of a LiPo cell balance checker, balancer, and USB charger: This little iSDT BattGo is worth a look. It's not cheap but it is effective and performs as expected.

iSDT Balancer and Charger Reviewed (10 min 52 sec)

Posted by GroundControlRC | Dec 05, 2019 @ 10:28 AM | 2,550 Views


Review Flight #3 Manual Mode - Eachine Mini Mustang P-51D RTF

Here is a link to the Video:
https://www.youtube.com/watch?v=Kht-alf8M8E

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Eachine #MiniMustang #P51D

This Aircraft is courtesy of Banggood!

Eachine Mini Mustang P-51D RTF
https://www.banggood.com/custlink/vvmDAdvdjk

I have been wanting to Review this Aircraft since first seeing it and Banggood was kind enough to send one for Review!
This Mustang looks awesome especially with the paint scheme.
It's called a Mini but I would categorize it as a Micro.
It's made of EPP Foam which should make it very durable.

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Eachine Mini Mustang P-51D RTF
https://www.banggood.com/custlink/vvmDAdvdjk

Spare Parts:

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/3_7V-360mAh...47791920140372

Brushed Motor 10mm Hollow Cup for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/10mm-Hollow...47791920140372

Prop 130X70mm Propeller Set for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/130X70mm-Pr...47791920140372

Gearbox for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/Gearbox-for...47791920140372

Receiver Board Original 4 CH Onboard Servo for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/Original-4-...47791920140372

Front Landing Gear Set for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/Front-Landi...47791920140372

Eachine Mini Mustang P-51D RC Airplane Push Rod Set
https://www.banggood.com/Eachine-Min...47791920140372

2PCS Eachine Mini Mustang P-51D RC Airplane Spare Part Rudder Angle
https://www.banggood.com/2PCS-Eachin...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by Nick Akerson | Dec 05, 2019 @ 02:28 AM | 2,827 Views
What are the design principles of multi-rotor drones? The multi-rotor UAV design is a comprehensive system, in terms of structure, including aerodynamics, structure, strength, power, materials, technology, shape and so on. Through the overall design indicators, the system is modularized, the modules and the interfaces between the modules are designed, and finally the overall design of the multi-rotor UAV is realized through system integration.

A good industrial designer must be an excellent structural designer. As mentioned earlier, the industrial design of the drone is related to the overall shape, and the shape design is related to the external structural layout, so it is about the multi-rotor drone In the early design stage, the design of Tianma Starry Sky can be performed according to the design concept and design skills. Using divergent thinking, the basic content of the multi-rotor drone's use, function, structure and form is explained.



1.Use

In recent years, with the rapid development of multi-rotor drone technology, there are more and more application scenarios. In military terms, multi-rotor drones are divided into reconnaissance and target aircraft. Reconnaissance aircraft are used to complete battlefield reconnaissance and surveillance, Positioning and firing, damage assessment, electronic warfare, etc .; civil aspects, such as border patrol, logistics and transportation, aerial photography, aerial prospecting, disaster surveillance, traffic patrol,...Continue Reading
Posted by bnrusso | Dec 05, 2019 @ 01:55 AM | 2,935 Views
UPDATING to 2.3.3RC1
BRUNO N. RUSSO JR.·WEDNESDAY, DECEMBER 9, 2019

pre req.:

Download and install https://quadmeup.com/stm32-virtualco...r-for-windows/
download and install https://impulserc.com/pages/downloads

Firmware updating to 2.3.3 RC1 and latest MPM
1. go to OpenTX at http://www.open-tx.org/2019/12/04/opentx-2.3.3RC1
2. download, save and install companion 2.3.3RC1 . http://downloads.open-tx.org/2.3/rc/...s-2.3.3RC1.exe
3. when you run companion, connect your T16 in bootloader mode (L&R trims IN while pressing power) check or install radio profile and settings, tab2. Application.., release candidate stable. Tab1. TYPE Jumper T16, AETR is recommended for default ***, mode ? (2 for me), select internal and lua and Flex for me.
4. select download and “check for updates”. Download the bin file then change name to RC1... Also download the latest SD card contents. (USE the latest zip file.)
5. Extract all (I used DOWNLOAD folder), open the SD card folder, for faster writing, open sounds and delete all but native language, “ENglish” for me, and back out to directories.
6. Open drive letter for t16 SD that shows all the folders starting with FIRMWARE, (mine is E:, put them side by side and drag and drop from unzipped SD folder to E: with overwrite all. This will keep your models but ONLY if you had nightlies and not Jumper TX models.
7. Drag and drop the RC1.....bin file from DOWNLOADS (step 4) into FIRMWARE folder of E: GO TO step 10 if you...Continue Reading