Jubz's blog View Details
Posted by Jubz | Jan 12, 2020 @ 10:49 AM | 3,473 Views
Prestige 2PK Windy, Tenshock 1515-15T w/ Reisenauer 5:1 micro gearbox, Castle Phoenix Edge Lite 50 w/ BEC set to 7.4v, Vladimir 32/6 spinner, GM 15x8, Tattu 3S 850 mAh 75C, KST X10 Mini w/ IDS for flaps, MKS HV6110 w/ IDS on ailerons, MKS HV6110 for elevator & rudder, FrSky G-RX8 rx, Altis 4+.

AUW: 1495 g/53 oz
CG: 111 mm
Nose-stock: 390 mm length
Nose trimmed for CG 111 mm: 348 mm length

Using a pull tab (Kapton tape) on the canopy since it's so tight; folds down flat due to the slight curve of the canopy.
Added the lightest ballast bar (236 g/8.4 oz); resulted in AUW 1735 g (61 oz) and CG 110 mm.
Posted by Jubz | Jul 28, 2019 @ 08:25 AM | 2,379 Views
Infinity NG short nose vtail & Ultima (1).
Posted by Jubz | May 05, 2019 @ 08:23 AM | 1,463 Views
Repurposed cigar box - Padron 4000.
Posted by Jubz | Jan 05, 2018 @ 01:00 AM | 3,736 Views
Added a new bird to the quiver for the 2018 season, an Ultima Strong with an extra set of standard wingtips. Nice having carbon pushrods instead of the cable system.

Some weights, strong layup
Fuse: 148 g
Center panel: 432 g
Right tip - strong: 178 g
Right tip - standard: 152 g
Left tip - strong: 182 g
Left tip - standard: 154 g
Stab: 36 g
Rudder: 30 g

Assembled frame weight w/ strong tips: 1028 g (36.3 oz)
Assembled frame weight w/ standards tips: 976 g (34.4 oz)

My initial thought is to fly with the lighter standard wingtips, and when the wind picks up use the strong tips, along with ballast.

Thanks Ali @FlightComp!
Posted by Jubz | Jan 04, 2018 @ 05:14 PM | 8,319 Views
New Infinity NG F5J with the performance layup. Servos and LDS system factory installed; MKS 6110's for the ailerons and KST X10 Mini's for the flaps.

Some weights (performance layup)
Fuse: 180 g
Right wing: 430 g
Left wing: 434 g
Stab: 26 g
Rudder: 28 g
Weight w/ 3.5 degree carbon joiner (3.5 degrees, 50 g; 6 degrees, 58 g): 1150g (40.6 oz)

Most likely will install a HET 2W-4600KV WITH MICRO EDITION 5:1NL motor, running 3S with a 14x7 GM prop.
Thanks Ali @FlightComp!
Posted by Jubz | Oct 13, 2017 @ 08:38 AM | 3,827 Views
Vortex 3 strong, 2.4 GHz friendly; build pending.
Posted by Jubz | Aug 10, 2017 @ 11:52 PM | 3,540 Views
Fireblade DLG's:
Red: version 1, hollow-molded wings
Purple version 2, solid core wings

KST 08 servos throughout in both FIreblades.
Posted by Jubz | Aug 10, 2017 @ 11:47 PM | 3,557 Views
Ultima F5J -standard (light) powered by a Mega Motor 16/15/5CE direct drive motor w/ 10x6 prop.
*Strong version w/ pushrods pending
Posted by Jubz | Aug 10, 2017 @ 11:43 PM | 4,361 Views
950mm DLG from Armsoar: Go Mini
Posted by Jubz | Aug 10, 2017 @ 11:40 PM | 3,882 Views
F5J's: PIke Dynamic & Pike Perfection
Pike Dynamic: powered by a Mega Motor 16/15/5CE direct drive motor w/ a 10x6 prop.
Pike Perfection powered by a Powerline 1025 geared motor w/ 16x8 prop.

Added the settings for the P-Dynamic.
Posted by Jubz | Dec 01, 2015 @ 02:49 AM | 5,068 Views
Horus X10S & Horus X12S.