-
Views: 648
Crawler side shot. pretty good articulation for stock TLT shocks. -
Views: 485
side view of the shortened 540 motor that I used as a bearing carrier for the pinion to spur contact point. I gutted the motor can, took everything off the shaft and cut the can in half and mounted it back together so the shaft would stick out the endbell -
Views: 507
Top view of the GD-600 with Integy 55t motor mounted. Works really well mounted that far forward. Helps put more weight over the front wheels for better traction and balance. -
Views: 574
No use letting a good servo go to waste. I added a second one to the steering on my crawler to double the torque. Works great. -
Views: 519
Shot of the GD-600 gearbox with the Integy 55t mounted on the very front of the frame rails. -
Views: 475
bottom view of the drive cups and dogbone that connects the GD-600 withe the shaft of the shortened 540 motor mounted where the Integy 55t was in the stock position.
Comments (0)
Add Comment
-
Views: 873
L-19 birddog This plane was scratch built from free plans I got from a member on RCGroups. sp400 geared 2.5 to 1 w/ 9x6 prop. 8 cell AE600 mah nicads -
Views: 999
A-10 warthog Scratchbuilt from model airplane news plans. 2-cox 051 tee dee engines turning 5x3 props mounted in 2 liter coke bottle nacelles. -
Views: 664
Profile Cub built from plans I got from Randy Randolph. MS2 electric motor 120mah 6 cell nicad battery. -
Views: 1391
Homebuilt Sig Kadet Senior wing and tail Fox 74 ,2stroke turning a 15x6 prop. Tires are go-kart innertubes with custom hubs to mount them on the 5/32 gear. Will fly slower than you can walk, and carry as much weight as you can strap on it!! -
Views: 637
TigerMoth ARF by Dymond RC Enya 53 fourstroke Flies very scale and lands like a butterfly with soar feet. -
Views: 985
3 Homebuilts from the same design using Sig Kadet Senior wings and tail sections. -
Views: 716
World Models Extra 300 SuperTigre 90 twostroke -
Views: 819
Bee-Tween designed by Randy Randolph Cox 049 texaco engine.
