rcflyer7824's blog View Details
Posted by rcflyer7824 | Sep 21, 2018 @ 01:37 PM | 1,549 Views
will the 800mm corsair v2 by fms fly on a 3s? also, what prop should I put on to make sure it doesn't draw too many amps?
Posted by rcflyer7824 | Jul 26, 2018 @ 08:40 PM | 2,299 Views
I just got a belly landing plane and it is my first plane that doesn't have landing gear and was wondering what I could do to stop the prop from breaking when belly landing. this is the plane, thanks.

Posted by rcflyer7824 | Jul 15, 2018 @ 07:33 PM | 2,065 Views
I am looking to get an upgrade from my DX6i and do not want to spend more than $200. what would be a good upgrade with more functionality?
Posted by rcflyer7824 | Jan 22, 2017 @ 06:35 PM | 3,058 Views
I live on long island. Price is $180. it is in Pretty well condition. All electronics in helicopter are in good condition. No modifications to flight characteristics have been made. Flies great. It is 25.5" in length. Comes with stock box, all manuals, charger, A/C and D/C power supply, and some extra parts. All you need to complete is a transmitter and an 11.1v 2200mAh 3S 30C LiPo battery. I can recommend a transmitter and battery for you if you contact me and want me to.
Posted by rcflyer7824 | Jan 20, 2017 @ 04:49 PM | 2,945 Views
Im having trouble landing my Freewing Rebel 70 V2 without it either bouncing or without me coming in too fast. Any tips on how to properly land?
Posted by rcflyer7824 | Aug 19, 2016 @ 06:26 PM | 2,692 Views
do you need to have the gyro in the middle of the plane? because I have my gyro towards the left of the plane because I couldn't fit it anywhere else. is it ok to do that, or do I need the gyro in the middle of the plane? thanks
Posted by rcflyer7824 | Aug 18, 2016 @ 11:15 PM | 2,840 Views
I recently bought the Freewing Rebel 70 V2, and I was wondering if I should use a gyro in this one. I've heard mixed opinions and don't know if I should use one or not. thanks
Posted by rcflyer7824 | Jul 30, 2016 @ 05:32 PM | 3,994 Views
my dx6i has been having a problem where the throttle stick will be all the way down, but in the monitor, the throttle is all the way up. I first noticed it in phoenix sim, and thankfully not while im actually flying. does anyone know how to fix this?
Posted by rcflyer7824 | Mar 08, 2015 @ 11:46 AM | 4,437 Views
my Spektrum ar636 with the safe was working fine yesterday but it turn on today. The light doesn't go on. I tested all the other electronics on another receiver and they all work. Why did it just stop working? Is it broken or am I just doing something wrong. Thanks.
Posted by rcflyer7824 | Mar 07, 2015 @ 11:49 AM | 4,750 Views
I just modded my parkzone Sukhoi SU-29MM to a 45A ESC, an E-flite 15 size motor, and a 13 by 6.5E prop. it was working fine but yesterday i tried turning it on, and the ESC would'nt arm. i soon realized on my DX6I, I had to raise the travel adjust to 125% instead of 100%. it works now, but why? why did it all the sudden only work on 125% travel adjust?
Posted by rcflyer7824 | Mar 06, 2015 @ 03:44 PM | 6,167 Views
Where do I look online to find rc flying events online?
Posted by rcflyer7824 | Nov 02, 2014 @ 07:31 PM | 4,782 Views
I was looking to get a motor, ESC, and battery for this 3D plane i was building. would this be ok?

Max Cont Current: 80A
Max Burst Current: 100A for 10 seconds
Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery
BEC: 5.5V/6A Switching BEC
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 50x30mm
Weight: 70g (including wires)

Kv(rpm/v) 740
Weight (g) 195
Max Current(A) 50
Resistance(mh) 13
Max Voltage(V) 19
Power(W) 870
Shaft A (mm) 5
Length B (mm) 48
Diameter C (mm) 42
Can Length (mm) 23
Total Length E (mm) 70

Capacity(mAh) 4000
Config (s) 4
Discharge (c) 30
Weight (g) 452
Max Charge Rate (C) 2
Length-A(mm) 148
Height-B(mm) 50
Width-C(mm) 29
Posted by rcflyer7824 | Oct 20, 2014 @ 02:21 PM | 3,684 Views
how do I figure out the flight time of an rc plane?