jameschen072's blog View Details
Posted by jameschen072 | Today @ 10:47 AM | 580 Views
WPL 1:10 D42 Review ( Tianjin Dafa TJ110/Daihatsu Hijet)

From the showroom

Hi everyone, your friend James here, and today we are taking a look at the WPL D42, the second model built on the D12 platform.
Like the D12, the D42 comes as a ready-to-run kit with everything you need to get up and going, other than the two AA batteries which power the transmitter.
Featuring a 2.4 GHz radio system, three-wire servos, and proportional controls on both steering and throttle. This model has many hobby-grade features despite its toy-grade pricing.

From the box, you'll find the pre-assembled vehicle, transmitter, charger, decal sheet, manual, and some spares. Some final assembly needs to be done by the user, like installing the wing mirrors, door handles, wipers and applying the decals. I actually messed up on the decal for the door rails and had to get another body from WPL, so be very careful when applying the decal there or you can also opt not to apply the decal as I did.

A bit of history

Hobbyists outside of China may be unfamiliar with this particular vehicle, the Tianjin Dafa TJ110. While hobbyists in Asia may recognize it as the Daihatsu Hijet.

Back in 1984, the first Daihatsu Hijets arrived from Japan as knockdown kits or CKDs. These were assembled, painted, and delivered to customers in small quantities- the factory only had 8 people running the production line at the very beginning.

...Continue Reading
Posted by jameschen072 | May 26, 2021 @ 10:29 AM | 25,450 Views
Hey gents,
Just got yet another 1/76 from Turbo Racing,

Full review below
Turbo Racing 1/76 Racer review (6 min 10 sec)

here's the silly little run video itself, titled: The small and the easily agitated

The small and the easily agitated ft. Turbo Racing 1/76 (OO scale) Racer (1 min 18 sec)
...Continue Reading
Posted by jameschen072 | Feb 05, 2021 @ 11:10 AM | 18,478 Views
Hey everyone,
Here's a video review I made of the MN86KS. I'm absolutely addicted to these sub-tenth scale crawlers!

MN Model 1/12 MN86KS full review (8 min 36 sec)

The MN86 is one of the best quality 12th scale vehicles I've come across, but it's not without it's quirks. In this video we will explore the good, the bad and hopefully help you decide whether or not this vehicle is right for you.

Electronics used: Stock servo, Stock 390 motor, Flysky 3ch RX, Flysky GT3 TX, 7.4V 1000mAh LiPO

Drive footage starts at 5:15

Get yours here (affiliated):

MN86K: https://www.banggood.com/custlink/DKKdiL9ZZO


Coupon for 20% off:
Posted by jameschen072 | Sep 24, 2020 @ 12:12 PM | 40,435 Views
Hey everyone,
Thought you might enjoy this review of the 1/76 (HO scale) Mini by Turbo Racing.
Perfect for those of us stuck at home... race just about anywhere!
Turbo Racing 1/76 (HO scale) Mini- Full Review (6 min 45 sec)

Posted by jameschen072 | Sep 14, 2020 @ 08:07 AM | 42,059 Views
JamesChen072's WPL D-12 review

Kei trucks are a familiar sight for anyone who has lived in or travelled to Asia. Due to the population density and narrow streets in many of these nations, versatile, lightweight kei trucks are people carriers, food vendors, fire trucks and everything in between.

Join me as we go over the D12 in detail- from physical features to electronics, durability to drivability.

Disclaimer: Although the sample was provided by the manufacturer, there is an understanding that the review will remain unbiased and that product flaws, if found, will be discussed.

From the dealership

1x D12 fully built
1x 2.4GHz 2 channel radio
2x Decal sheets
1x Manual
1x USB/2 cell Li Ion Charger
1x 7.4V 500mAh LiIon battery
Spare linkages and drive- shaft components.

...Continue Reading
Posted by jameschen072 | Oct 28, 2019 @ 07:28 AM | 42,428 Views
Volantex 761-5 P-51D Review- mind blown!

Before we begin

I’ve always loved the idea of a micro warbird- one that’s got scale looks, isn’t too hard to fly and doesn’t break the bank. Over the years, I’ve purchased quite a few, but most were somewhat disappointing in that they were either fragile, hard to fly, expensive or a combination of the three (favorites: UMX Habu, Rage Staggerwing, Firelands WWI Biplanes).
When Volantex told me that they were planning on making a micro P-51D, I was skeptical. It’s a tall order to make a micro that flies well, let alone their goal of making it robust and affordable.
I’d like to thank Volantex for sending me the review unit and for supporting my unbiased reviews. If you have any questions, comments or suggestions, please do let me know!

From the hangar

The P-51D is pre-painted to represent “Bunnie”, a Mustang that was flown by flight leader Capt. Roscoe Brown of the 332nd fighter group- better known as the Tuskegee airmen. Captain Brown actually shot down a ME-262 jet while piloting his P-51! Let me lead you down the YouTube rabbit hole I’m in right now with Capt. Brown’s interview: Pre-built from the factory, the P-51D has everything you need to get flying (other than 4x”AA” batteries for the transmitter). Landing gears are included if you choose to take off and land on a smooth surface. The landing...Continue Reading
Posted by jameschen072 | May 03, 2019 @ 01:30 PM | 42,684 Views
JamesChen072's WPL C34KM Toyota FJ40 Crawler review

Hey everyone!
WPL, one of the most interesting companies to have graced the hobby industry lately… has released yet another product. Despite knowing the many flaws of previous products from first-hand experience, I just had to make the jump… I’ve purchased every truck they’ve released and it’s becoming an addiction!
So here it is, a review of the C34KM metal edition kit… a 1/16th (realistically closer to a 1/14th scale) scaler with an injection molded FJ40 body for the whopping price of 98 dollars (rumored) . Is it too good to be true?
Before we begin, I’d like to thank Banggood for not only providing the review unit, but also for their understanding that my reviews are unbiased and do reveal the good, the bad and sometimes the ugly sides of the reviewed product.

Past WPL’s products were fantastic to look at but realistically not reliable enough to take to the trails; I recall the first B series trucks had extremely brittle plastics and the gearbox was a nightmare to work with. As time progressed, evolutionary changes were made to the subsequent trucks-with enough patience through trial and error, it was possible to make a decent looking truck with performance to match.
Unlike its predecessors, the C34KM aims to be fully upgraded out of the box, eliminating the need to shop between third party upgrades and having to drill, file and modify parts in order to make...Continue Reading
Posted by jameschen072 | Dec 11, 2018 @ 03:34 AM | 79,029 Views
MN90 1/12 Defender Review

Videos pending


Hi everyone!
Ever since the WPL B and C series came along, Iíve been hooked on these cheap trucks with fantastic looking bodies (Looks like itís become somewhat of a trend in the industry!). As frustrating as they are to build sometimes, once the transmission is upgraded, these trucks run great and itís really not too difficult to find realistic scenery to roam through.
So, a buddy of mine was nice enough to get me this to play with- the MN90, which looks to be a hybrid WPL chassis with a Land Rover 90 body. As there doesnít seem to be a thread on this truck, I thought it might be worthwhile to do a short writeup so as to help those still on the fence about the MN90 make an informed decision. Please note that this review is mostly discussing the kit form of the truck, as the RTR uses non-standard radio gear and has non-proportional steering.

Dimensions: 35*16.5*20.5cm
Motor: 180 brushed
Servo: 17g Three-wire

...Continue Reading
Posted by jameschen072 | Jun 12, 2018 @ 11:12 PM | 84,015 Views
Volantex Ranger 600 review

If there is one thing I enjoy more than flying planes, it’s sharing the experience. I’ve recently developed the habit of always having a trainer aircraft in my car, so that those who were interested could get a taste of what R/C flying is all about. Recently, the Ranger 600 has been my go-to trainer, it has taught about a dozen club members how to fly and we eventually purchased 12 of these fun little trainers so we could mess around with them at the field.
So, this review would be a little different to my usual ones- here’s a plane that I’m quite familiar with already, instead of something completely brand new. I’ll tell you what I love about it, what wears out and what my comments to the factory were in terms of what needs to be changed in the future.
As my Ranger 600 has been put through more abuse than any trainer really should, Volantex has been nice enough to provide me with a brand-new unit to do the unboxing and flight review with. I appreciate their support of my always unbiased reviews.

Design and specs
The Ranger 600 is a 600mm wingspan EPP high-wing trainer with an 8620 coreless motor driving a pusher-prop above the wing. The all-in-one unit smartly integrates the receiver, esc, and even two 2 gram servos- which are connected to the rudder and elevator surfaces. An integrated 3 axis gyro+3 axis accelerometer system provides electronic stabilization, the gyro could be either turned off...Continue Reading
Posted by jameschen072 | Jan 18, 2018 @ 11:13 AM | 82,425 Views
For the original thread please follow this link, thanks!

Eachine E500 VTOL Uncut flight footage (5 min 44 sec)

************************Review below********************************************* ***********************
Eachine E500 Review

The Eachine Mirage E500 is a 497mm wingspan VTOL aircraft. Designed to eliminate a lot of problems that plagued ďconventionalĒ R/C VTOL aircraft, the E500 may have the potential of becoming a VTOL for the masses. In this review we are going to analyze this aircraft from my perspective as a product developer, and hopefully provide you with some insight towards what itís like on the ground and in the air.
Special thanks to Banggood.com for providing the sample unit, which was provided under the understanding that my review of the E500 would be unbiased.

A bit of historyÖ
VTOL (Vertical Take Off and Landing) technology has been one of the holy grails of the R/C industry. With the (rather recent) advent of lightweight brushless power systems and lithium polymer batteries, the only thing that stood in the way of developing a true VTOL was the flight control system.
In my previous life as a developer for a certain US-based R/C company, we played with numerous VTOL designs- a quad motor with pivoting pods and two wing-sets, and a V22 with an EDF in the tail section to provide balance. While advanced for the time, these models did still suffer from some of the fundamental problems in VTOL design- highly...Continue Reading
Posted by jameschen072 | Jan 02, 2018 @ 01:25 AM | 87,184 Views
Original thread here
WPL Gaz 66 on the job (2 min 0 sec)

WPL Gaz 66 (B24) 1/16th truck review
Hi everyone,
I donít think thereís an active thread on the WPL B24 Gaz 66 truck so Iíve decided to write a mini-review about mine. Hope itíll help those who are on the edge about acquiring this truck a little more information about how the build went and whether itís worthwhile.
Even though the Gaz has been on the market for a while now, I initially decided against picking one up due to the bad experience that I had with the B1 truck (mine were from the 1st batch that were available on the market). Drivetrain issues, hard tires and poorly painted bodies were just the beginning of that nightmare, so much so that I had to part out one of the trucks to keep the other one going.
After receiving the third truck in their lineup (C14 Hilux: Review) though, I felt that the quality has improved enough that the Gaz 66 was worth a try. The history of the real truck is quite intriguing, google led me to this article, if youíre interested: http://englishrussia.com/2016/11/08/...-union-gaz-66/

The model

The real thing! (Gaz 66 wikipedia page)

From the box:
I bought the kit version of the Gaz 66, as Iíve found that not only were the RTRís put together in a haphazard fashion, they had non-proportional steering via a toy servo mechanism.
The kit comes with a standard 3-wire 9g servo that could be used on with most hobby-grade receivers and the drive-motor. All other...Continue Reading
Posted by jameschen072 | Dec 26, 2017 @ 04:22 AM | 93,961 Views
WPL Hilux at the beach (2 min 59 sec)

Hi all,

I don't think a thread has appeared on this particular truck yet, probably because it's still quite new. I really like the truck for its scale looks...and thought even if it didn't perform that well it would look nice on a shelf somewhere. This is just a small writeup and not a full review of the truck, so if I've missed anything or if you want to find out more about certain components or characteristics of the truck please let me know.

The C14 Hilux is available in tan and red, but in kit form only (from what I could find at least). I bought a tan kit for about 24 dollars (is that crazy or what!?). The only electronic components that come with the kit are a 9g servo, LED lights and a 180 sized brushed-motor. I've purchased a 30A brushed speed controller and a 7.4V 1500mAh 10C pack to power the little beast .

PNP price comes to around 34 bucks, definitely one of the cheapest ways to get into R/C.

The build was pretty straight-forward, the manual is completely pictorial, so nothing's really lost in translation... but some details are left out (instructions for how to lubricate the gears and which screws to use in certain locations, for example). I wasn't planning on writing anything about this truck when I got it, so I didn't take any pictures of the build... but it took me about 2.5 hours and I don't think the average hobbyist would find it to be difficult. For those who own the B-1 truck, the Hilux...Continue Reading
Posted by jameschen072 | Nov 26, 2017 @ 12:28 AM | 82,236 Views
The iHobby 1/24 MT review

I’ve always enjoyed sharing my hobby with others- when they pick up the transmitter and understand why grown men play with toy cars (well, at least in my mind they understand) … it’s almost magical. While I do have slower trucks that I trust with beginners, I’ve been looking for something that I don’t have to cringe as much in an inevitable crash.
As physics is the law, it’s time to think small! That’s what sparked my interest in the iHobby Racer. Landbow, the manufacturer, contacted me a couple weeks ago saying that they’ve a new product for me to test out (professionally, I develop R/C products for a US-based company). I really enjoyed testing the truck and asked the manufacturer to provide a production sample for me to do a full review.
Questions, suggestions and comments are welcomed, as always.

*Disclaimer: The truck was provided by Landbow, under the understanding that the review will be unbiased, and that there are no economic gains for me other than the trucks provided for testing. I write these reviews for fun and intend to keep it that way!


Official specs are as follows:

Wheelbase: 125 mm
Ground Clearance: 9 mm
9g 3 wire servo
2-in-1 Speed controller+RX
High-Grip all-terrain tyre : Diameter 42 mm , Width 20 mm
Gear rate : 1: 15.6
Motor type: 180
Spring shocks
Max speed: 19 MPH
Control distance: 30 M
Battery required: Li-po 3.7V 650mAH softpack (...Continue Reading
Posted by jameschen072 | Mar 10, 2016 @ 11:34 AM | 97,924 Views

Fei-Lun has been enjoying a streak of success with their FT line of fast and affordable 2.4GHz boats. While not always known for being the most reliable boats out there, they were easy to work on, easy to run and the self-righting feature was much appreciated by most beginners and experts alike.

When I was doing some pre-review research, I was shocked to find that this boat measures in at 65cm and has a 4S power system. That’s an insane amount of power for something that is not entirely hobby-grade (But I guess it’s less crazy than its predecessor, the FT010, which has a 4S system and brushed motors).
Before we begin, I would like to thank T-Mart for dragging me back into the world of writing reviews, I appreciate that they continue to value my opinion. I hope that you, the reader, would get some useful information out of this review. Please do not hesitate to let me know if you’ve any questions or comments.

From the dock
Like the other boats in the FT line, the FT011 comes with everything (other than the AA batteries) you need to get started. I was quite impressed that they included multiple spare props along with some maintenance tools for the user, nice touch!

1x FT011 boat
1x 2.4GHz Transmitter (Requires 6x “AA” batteries)
1x 4S lipo charger
1x 14.8V 2200mAh 30C Lithium Polymer battery
1x Plastic display stand
1x Rubber nosecone bumper
2x Propeller (spares)
1x Bag of accessories (3x Spare props, 1x Waterproof marine
...Continue Reading
Posted by jameschen072 | Jan 08, 2014 @ 08:45 PM | 103,449 Views
The FMS 800mm V-Tail (Trainer/Parkflyer) review

Hey guys,
Do you remember what your first trainer aircraft is/was? For me, it was a REALLY ugly 2 channel HiTEC Sky Scooter that was patched up in so many places that I swore it had more epoxy/tape than foam.

A decade later, boy has technology changed the game. T-mart sent me the star of our review today, the V-Tail. In this review, I would like to give you my honest and unbiased opinion on this aircraft, concluding with whether or not I think this aircraft is good for the absolute beginner.

Before we begin, I would like to thank T-mart for providing the sample and agreeing to an unbiased review. Their support is much appreciated.

From The Box
The aircraft came well protected in the Styrofoam box

Included is the following:
1x 2.4GHz 4 channel transmitter
1x 800mm V-tail glider
1x Linkage set (packaged with glue and a spare wing bolt)
1x 7.4V 350mAh 15c Lipo
1x charger (no adapter though!)

...Continue Reading
Posted by jameschen072 | Apr 20, 2013 @ 10:28 AM | 64,391 Views
The WLToys V222 review


Hey guys,

† Well here's a definite first, I'm writing the review while sitting in my cramped seat aboard an Airbus A320 at 35000ft! With the V222 in the cargo hold beneath me, I'm heading back to Beijing to finish the final few months of medical school (it's finally going to be over!)
† Ok enough blabber from me, let's get to the matter at hand. A week or so ago I received the V222 sample from Banggood along with my beloved FBL70 and the V212 from MassiveRC's supplier. Since I opened the V222 last, the promised review has been delayed somewhat (my apologies).

So my V222 was delivered to me in a V959 box, and from appearances alone, it's almost impossible to tell the two apart. Indeed, the majority of parts used on the V222 come directly from the V959, except for the Transmitter and receiver. I like the parts compatibility, but it was all sort of Deja vu!†
...Continue Reading
Posted by jameschen072 | Apr 15, 2013 @ 02:39 AM | 60,928 Views
The WLToys V212 review


Hey guys,
I've been looking forward to reviewing the WLToys V212 for quite a while now. The V212 is intended to be an accelerometer-equipped version of the V949... though once I got it, I've found that it is a lot more than just a simple replacement.
I hope that this review would be entertaining and helpful for those who are looking into getting the V212 as a new addition to their fleet.

Before we start, I would like to thank our (MassiveRC's) supplier, Mr. Chen, for getting me the sample at lightning speed.

The walk-around

Even though the V212 is supposed to be a similar product to the V949; mechanically, it shares most parts with the V959. Only the canopy is carried over from the V949.

The new receiver board features an accelerometer chip, 4 LED power outlets that could be controlled via the transmitter and 4 motor plugs. On the board is a revision number: 2012/2/2 REV06. This quad uses the V2x2 protocol that is compatible with all other WLToys quads that have accelerometers.
...Continue Reading
Posted by jameschen072 | Apr 12, 2013 @ 11:02 AM | 58,317 Views
The HiSky FBL70 review


A few weeks ago I accepted the opportunity to review the HiSky FBL 70; a tiny, relatively cheap fixed-pitch helicopter that really caught my eye (that canopy looks amazing in my opinion). Since my review of the Walkera Super FP, these flybarless, fixed-pitched micros have really caught my attention; I believe that flybarless systems were the future of these 4 channel micros.

I hope that this review could help you make a decision on whether the FBL70 is the right helicopter for your fleet. As always, questions and comments welcome

Before we begin, I would like to thank Annry from Banggood.com for supporting my unbiased standpoint and providing the review sample.


The test sample is a FBL70+HiSky X-6S package. It arrived, oddly enough, after travelling half way around the world then back to Asia again. Oh well, at least it was very well protected!

Here is a list of the items that were included in the package.

1 x FBL70 helicopter
1 x HiSky X6S transmitter
1 x USB charger
2 x LI-PO battery
1 x Spare Main blades (Bullet type)
1x Spare tail blade
1x Spares pack (all linkages, a hex key and a phillips screwdriver)
2x Instruction Manuals (1 for the heli, 1 for the transmitter)

...Continue Reading
Posted by jameschen072 | Jan 09, 2013 @ 12:01 PM | 72,325 Views
The WLToys V959 review


Hey guys, I hope everyone had a very nice holiday/ New years! I am very pleased to have the pleasure of writing this review as my first of 2013 (first of many, I hope!).
The V959 appeared late last year but it has practically flown under the radar for most of the past few months. I think the quad is quite innovative but there has been little or no information about it anywhere. Doesn't matter, we'll take a look at it anyways... I hope at the very least, this review will provide you with some entertainment...but hopefully it'll be helpful towards the decision-making process on purchasing your new quad.

The reason why I'm very interested in the 959 is not only because of it's functionality...but because I own both the Hoten X and the 949... and I keep them in relatively close proximity... so I suspect they've been doing some naughty business and this is their offspring :P
...Continue Reading
Posted by jameschen072 | Nov 27, 2012 @ 05:33 AM | 107,282 Views
Note that this is a work in progress, since I am interning at a hospital, my work hours are quite strange compared to that of the gf's or my cameraman, Nutta. So I'll find time for them to help me make a flight video when possible. Bear with me please! I've tested the quad extensively though, so here's the review in it's current form:


Hey everyone,
After much anticipation, my RC EYE One from RC Logger has finally arrived! I was supposed to receive it long ago but it was stuck at the customs office due to a month-long ban on R/C products (Politics, sigh). Anyways, it has arrived and here is what hopefully is an unbiased and helpful review about the RC EYE One. Before we start the main part of the review though, I would like to thank RC Logger (Chris, Tracy, Doris and Adam in particular) for providing the sample and sending it all the way to Beijing. Although they are representing the manufacturer, they have asked me on numerous occasions to make sure that the review is unbiased (as always). Oh, and I want to point out that I rarely see any company in the industry (or in other industries even) that do customer support/service as well as they do. They are a very professional team and dealing with them is a pleasure!

From the box
The RC EYE One came well packaged in a very compact and well designed box...no wasted space at all.. it reminds me of the boxes that other consumer electronics come in. The contents are well protected and
...Continue Reading