R/C Blogs - RC Groups
Posted by JohnVH | Today @ 12:59 PM | 10,107 Views
AKK A3 AIO All in one Switchable FPV Transmitter/Camera/Antenna Review (6 min 3 sec)


Get one here: https://goo.gl/f5Yo1y

Follow on Facebook: www.facebook.com/JohnVHRC

Here is an awesome all in one FPV setup! If you want to get into the air without any soldering, here you go! I use my HH UMX Batteries to power these, works great!!

HIT:
- Compact
- 40 Channels
- LIGHT
- Great range
- Price
- Switchable power
- Great camera view

MISS:
- None noted

AIO FPV camera+transmitter+antenna all 3 functions in one limit size and weight. weight:4.7g
Output power 25mW/50mW/200mW Switchable, Compatible with 5.8GHz googles and monitor.
Switchable Power AIO Camera is a must-have for both indoor and outdoor flying.
Nickel-plated 4 Leaf Antenna , RHCP circular polarization clover to Antirust and get strong signal.Installs in seconds.
Requires 1S LiPo battery, Suitable for Ultra Micro RC Aircraft. A RTF FPV device for beginners.
FPV Camera:
Output Power: 0/25mW/50mW/200mW (switchable) (Set output power on 0, to avoid frequency interference)
Input Power: 3.2-5.5V
Sensor: 1/3 "CMOS
Camera Resolution: 600TVLA
AKK AIO Camera is the leader of low illumination flying.
Mini illumination: 1 lux
Format: NTSC

Transmitter:
Support Video Format: NTSC
Output Impedance: 50 Ohm
Output signal strength: 13±1dbmdBm
Output Power: 25mW: 14dBm /50mW: 17dBm /200mW: 23dBm
Wireless Channel: 40CH
Antenna: RHCP circular polarization clover leaf antenna
Antenna Size: 22x29mm
Operating voltage: 3.2V ~ 5.5V
Current consumption: 25mW: 250mA-510mA /50mW: 270mA-640mA /200mW: 330mA-740mA
Audio carrier: NO

Package Includes:
1 x A3 AIO FPV Camera
1 x Cable
1 x User Manual

Song VoiceX [Rewind Remix Release]
Music provided by Rewind Remix httpsgoo.gl08ZthI
Artist NOXXUS
Posted by GadgetMart | Today @ 12:58 PM | 10,116 Views
Jeti DS16 & Spektrum DX18 G1
Posted by RC Roundtable | Today @ 11:49 AM | 10,188 Views
Episode 44: "Tony and Silent Fitz" is now live!

In this episode, we are joined by Tony Accurso from Motion RC. We talk about:
- ESM closing shop
- Spektrum iX12 radio
- Silent Fitz
- FAA musings
- Yo Tony
- What's next at Motion RC?
- Skymaster dreams
- The 1/2A influence
- The Evelyn factor
- Tony and Colonel Dave

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us a line here, our facebook page, or email: contact@rcroundtable.com.
Posted by blade strike | Today @ 11:11 AM | 10,219 Views

For all the new or soon to be owners, I thought I would put a list together of some great videos for you to watch. These are even good for current owners. You never know what you might learn after reviewing them.


Spark

Quick Tips:

https://www.youtube.com/playlist?lis...cYPXtkrOCptjwb

Spark Tutorials
https://www.youtube.com/playlist?lis...1Ay4772cZMexXq
https://www.youtube.com/playlist?lis...R6Rd2Cp8GaKa_i

Mavic

Mavic Pro Tutorials
https://www.youtube.com/playlist?lis...1FMKojPWd9x1Lf
https://www.youtube.com/playlist?lis...xD4Dm-tX4cnvzX

Phantom 4

Phantom 4 Tutorials
https://www.youtube.com/playlist?lis...zAnMdR6RYwS1mB
https://www.youtube.com/playlist?lis...d-66C51JRCMnat

Inspire 2

Inspire 2 Tutorial
DJI Tutorials - Inspire 2 - Unboxing (2 min 18 sec)

https://www.youtube.com/playlist?lis...E-63zrQdVn766A

Goggles

Goggle Tutorials
https://www.youtube.com/playlist?lis...nBCQ1ygSDnuA_R
DJI Goggles – Connecting the Aircraft (2 min 7 sec)
...Continue Reading
Posted by 1nspectorGadget | Today @ 10:54 AM | 10,223 Views
JJRC JJPRO X3 HAX GPS Brushless Drone - PART 2 - FULL REVIEW (38 min 12 sec)

This is a competitor to the Bugs 2 and Hubsan line of GPS drones.

Here are some product details:
● 1080P Full HD Camera
● Altitude Hold
● Headless Mode
● RTH failsafes / Auto Low-voltage RTH / Auto Signal-loss RTH
● 7.4V 2000mAh LiPo battery
● D1806 2300KV brushless motors
● 5G Wifi Signal for greater FPV range
Posted by Choppahman8 | Today @ 08:59 AM | 10,268 Views
Ready for some indoor fun!
Posted by TechTronic9000 | Today @ 07:57 AM | 10,316 Views
he ZOHD Nano Talon is a "Snap and Fly" plane that features an extremely quick way of assembly making it possible to be deployed in seconds. The plane also comes with a built in gyro stabilizer and V-tail mixer so you you will not need to fiddle with complicated transmitter setups while the gyro will help you learn to fly it easy. Last but not least the plane comes with a large internal bay accessible through no less than 3 different hatches and canopies making it very easy to work on and upgrade.

The Nano Talon is available from: HERE

Part 1 of a video build and review series, more info, pictures and details soon.

ZOHD Nano Talon - Full Build & Review, part 1 (14 min 48 sec)

Posted by kryptonite1995 | Today @ 04:44 AM | 10,403 Views
AKK Nano2
AKK Nano2 5.8GHZ 48 CH 25/50/100/200mW power switchable Micro FPV Transmitter


...Continue Reading
Posted by kryptonite1995 | Today @ 04:09 AM | 10,412 Views
AKK EIO 5.8 GHz 48CH 25mW FPV Transmitter with AIO Mini Camera and DVR for FPV Quadcopter Drone

Specification and Parameters:
Output power: 25mW
Input power: 3.2–5.5V
Current consumption: 640mA-330mA(25mW)
Camera resolution: 600TVL
Video system: NTSC
Field of view: 120° FOV
Sensor: 1/4" Color CMOS
Video Format: AVI
Recording Resolution: VGA @ 30fps
Micro TF Card: Max 32GB
Operating Temp: -10 ~ 60 degrees C
Frequency: 5.8GHz 6 bands 48 channels,
with Raceband: 5325-5945 MHZ
Size: 22*20mm(L*W)
Weight: 5.8g

Recording Function:
Install TF card first, max 32GB TF card supported.
Press button 1 start recording, R3 will keep flashing
while recording.
Press button 1 again to pause recording, recorded videos
will be saved to TF card automatically and R3 will stop flashing.

Notice: Each recorded video will be within 10 minutes.
After that, a new round of recording will be start automatically.


Posted by cuavlindy | Today @ 03:30 AM | 10,437 Views
Good News !

HOT CUAV PIX_DISPLAY I2C OLED Monitor For Pixhack/Pixhawk RC Multicopter Flight Control RC Models DIY Accessories
Description:
Screen resolution: 128*64
Screen material: OLED
Screen color: Yellow and blue
Data interface: I2C 4Lines
Operating voltage: 3.3-5V
Operating temperature; -10--+60°
Size of fixed hole: 25.76x20.2mm
Hole size: 2.4mm
Size:32.3x26.7x9mm
Weight:5g

Feature:
Light weight and good work.

more details can check here dear friends:

https://www.aliexpress.com/store/pro...47a05dd5qyj5Zy
Posted by FeiJi | Today @ 01:03 AM | 10,466 Views
Cool looking plane, hope it happens.
Posted by old4570 | Yesterday @ 11:15 PM | 10,508 Views
Bush League Modz ! ( Don't you just love them ? )

Here is one I just did today ...
I just love my DrillPro ( http://old4570.com/stuff/drill_pro.html ) = Review on my web ..

Anyhow .. The only thing that really was a bummer about this motor tool was the US plug ( Sorry guys ) .
And once I really came to the conclusion I loved this motor tool , I really needed to cut its plug off !

Once the plug was cut / butchered / removed I then cut and trimmed the + - wires and tinned them ( Solder )
I then screwed in the wires and put some electrical tape in the lead so as to be able to fit the plug cover firmly onto the lead and use a zip tie to hold it in place .

And if that sound easy , it was ! ( A seriously bush league mod )

Now my motor tool has the correct plug on it and we can live happily ever after ( ? ) ....
But seriously , this is one awesome motor tool that deserved the right plug on it ....Continue Reading
Posted by D_Dawg | Yesterday @ 10:43 PM | 10,517 Views
Because repairs on the simulator are so much easier and less expensive, than crashing your favorite RC plane while learning new tricks ...

Prometheus Flight training (4 min 38 sec)

Posted by forwardonly | Yesterday @ 09:13 PM | 10,568 Views
Haven't written in a while. Been a crazy semester at work and not much time for fun with toy planes. BUT, I did get to finish my Extra 300 and I've been able to take it out to the field twice! The first time was very short as daylight was dwindling. However, the plane took off beautifully and only required a couple clicks of trim. It was super easy to land and I could tell it was going to fly really well. I did not do any aerobatics as the engine was nut running super well and I was afraid I would dead stick it. I had to wait a couple weeks to try again, but the second flight day was super fun! I made sure to have more time. I got the shakes out with my Hog Bipe and then took the Extra up. Again, takeoff was a non event and the plane still flew very well. I did some mild aerobatics this time and practiced landing approaches and slow speed maneuvers. Inverted only required a touch of elevator. All basic aerobatics were easy and tracked well. I flew for 8 minutes then landed. I guess that I had about 1/4 of a tank of gas left but I think I'm still running a little rich. I love the Saito FA100 although the 120 would be a better power match. The Saito is so dang quiet and smooth sounding! Starts easy and runs well! I made 3 flights and some touch and gos. Post flight inspection showed no problems except a stripped landing gear thread. I filled the hole with gorilla glue and recapped it. I will see if that holds next time out. If not, I'll use epoxy. I...Continue Reading
Posted by kopterheld | Yesterday @ 07:59 PM | 10,600 Views
This is the new iRangeX IRX4 Plus Multiprotocol module that has a USB port for flashing new firmware. Unfortunately, the USB port does not work because a bootloader is missing here. Just was not installed. I you like to use the USB port you must first install boot loader with a FTDI232 adapter.

Video - burn boot loader and flashing new firmware over USB port (german with subtitle)
iRangeX IRX4 Plus Multiprotocol Modul USB Flashing (6 min 3 sec)


You can bye the iRX4 Plus from Banggood:
https://www.banggood.com/IRangeX-IRX4-Plus-2_4G-CC2500-NRF24L01-A7105-CYRF6936-4-IN-1-Multiprotocol-STM32-TX-Module-With-Case-p-1225080.html

FTDI232 Adapter:
https://www.banggood.com/FT232RL-FTDI-USB-To-TTL-Serial-Converter-Adapter-Module-For-Arduino-p-917226.html

GitHub DIY-Multiprotocol-TX-Module Homepage
https://github.com/pascallanger/DIY-...iling_STM32.md


Mein Equipment von Banggood:
Fatshark Dominator HD3 https://goo.gl/1VAeTh
INR18650-30Q 3000mAh Akkus - https://goo.gl/bfG1I0
Skyzone SKY02S V+ Brille - https://goo.gl/IWRARU
Skyzone 7.4V LiPo - https://goo.gl/pHqZcc
FrSky TARANIS Q X7 Funke - https://goo.gl/NLlhjc
FrSky X9D Plus SE Funke - https://goo.gl/KlnCoS
iRangeX IRX4 Plus Multiprotokol Modul - https://goo.gl/uF6Co8
FrSky XM Empfänger  - https://goo.gl/5InfW5
FrSky XM+ Empfänger - https://goo.gl/pcYGyO
FrSky R-XSR Empfänger - https://goo.gl/4YM9LH
FrSky XSR Empfänger - https://goo.gl/00SGNz
FlySky FS-i6X Funke - https://goo.gl/BJWvZj
Flysky FS-A8S Empfänger - https://goo.gl/xkGHQY
Flysky X6B Empfänger - https://goo.gl/L8H4FT
RunCam 3 Actiocam - https://goo.gl/9njQov
RunCam Eagle 2 - https://goo.gl/fauyaF
RunCam Micro Swift - https://goo.gl/2GxyFr
Runcam Swift Mini - https://goo.gl/Cxn8LR


Facebook - https://www.facebook.com/kopterheld/
Blog - https://kopterheld.wordpress.com/
Youtube - https://www.youtube.com/kopterheld
RCGroups - https://goo.gl/JYP87D
Posted by Halifax1 | Yesterday @ 07:31 PM | 10,613 Views
What is this connector for?