The mini pulse is almost there.

Oh yeah!!!

Working on the Trex, about halfway. Only problem is that I dont know if I will have courage to fly this baby.

I have not had my mCX for to long now, but was ready for something new and more challnging...That is where I thought of the mSR, and it was not to long before I had to get this little thing.

So it arrived this morning and I was just very exited!!! Taking it slow (just hovering for now) but is very fun.

After a crash that sort of clashed my acromasters nose, I finally got a new fuselage and got to fix it.

I got myself a e-flite blade mCX, enjoying it all the way.

Full-Scale fun....Continue Reading

When my acromaster came down the lipo went as well.

Here is some pic's:

Now when I first flew the easystar it was a great joy, but it missed something and that something was power. Most of the products I am using I got from HobbyKing.com.

Specs:

motor: Turnigy 2835 (380S) 2700kv Brushless Inrunner
http://www.hobbycity.com/hobbycity/s...idproduct=4201

ESC: Turnigy Push 40amp Speed Controller
http://www.hobbycity.com/hobbycity/s...idproduct=2165

servos: Hextronik HXT900 9g / 1.6kg / .12sec Micro Servo
http://www.hobbycity.com/hobbycity/s...?idproduct=662

battery: ZIPPY Flightmax 2200mAh 3S1P 25C
http://www.hobbycity.com/hobbycity/s...idproduct=7636

---------------------------------------

These are all available from hobbyking

I used a APC 4.5x5.5E Prop

Then next I used a motormount that I found at home. There was a bit of mod to the body where I had to cut a V shapest cut into the back of the easystar for the wires from the motor to the esc inside, and had to lenthen the wires that came from the motor.

New to the hobby but having a blast. Here is my planes I have at the moment, it is a multiplex acromaster, multiplex easystar, a scale air cadets wilga 2000 and and a e-flite mini showtime.