Posted by jmxp69 | Yesterday @ 10:17 PM | 297 Views
Nice helicopter:
Tron 5.5 RC Helicopter Build Review and Maiden (11 min 7 sec)

Posted by Cox PT-19 | Yesterday @ 09:40 PM | 306 Views
After a REALLY busy weekend, got some footage of the Wild Banshee flying with its Fox .36X.

Sig Banshee flying with its new Fox .36X Engine. (3 min 2 sec)

Posted by kopterheld | Yesterday @ 08:02 PM | 490 Views
The new 5 inch Freestyle from iFlight is now completely encased in plastic. Mini F7 FC 55A ESC's, super XING-E Pro 2207 motors, Caddx Polar Vista, 412g. My best Freestyle quad on the market that you can get as ready to fly

My Video with EN subtitles
iFlight Nazgul5 Evoque F5 bester 5 Zoll Freestyle (5 min 51 sec)


iFlight Nazgul5 Evoque F5 F5X Squadshed X with Caddx Polar Vista 6S
iFlight Shop - https://bit.ly/IFEVOQUEF5
BG Code: DRONES6 - https://www.banggood.com/custlink/K3Gy6RZU9f

iFlight Nazgul5 Evoque F5 DeadCat + DJI FPV Goggles V2 Combo
BG Code: DRONES6 - https://www.banggood.com/custlink/33GyB80N6j

iFlight Nazgul5 Evoque F5 F5X Squadshed X Analog 6S
BG Code: DRONES6 - https://www.banggood.com/custlink/mDvYeR9q84


iFlight Nazgul5 Evoque F5 F5X Squadshed X


flown with TBS Mambo transmitter and DJI goggles V2

...Continue Reading
Posted by the goon | Yesterday @ 06:15 PM | 732 Views
Alrighty then,

It had to happen. My wife has become a car person, and wanted a car of her own. She was afraid to hurt the Comet, and won't learn to drive the Metropolitan, so she picked this as her car; 1968 Ford Falcon sports coupe. We are the 4th owners. It was bought new in '68 in LA, traded in in '70 at Bill Morey Ford in Whittier. The 2nd owner bought it there in '70, for $2,100.00. She drove it till 1996, when she parked it in her garage till 2018. Her daughter mentioned it to a neighbor, who bought it in 2018 (owner #3). He went through it (trans/brakes/radiator/fuel system), repainted it original Wimbledon white, added the Weld wheels, removed the side chrome, and we saw it at a local car show in 2019. My wife fell in love with it. We lost track of it during 2020, then saw it again in May of 2021 at the same local show. The car changed hands in September, and we are the 4th owners. It is a factory 302, C4, power steering, vinyl top, factory air, bucket seat car. Interior is all original. There's only 74k on the clock. She couldn't be happier. Only changes are to add a front disk brake conversion, and new carpeting. As usual, all comments/criticism/threats are welcome, and encouraged,
Posted by vincent123 | Yesterday @ 11:56 AM | 1,284 Views
Hi folks,

just saying that i'm still alive and kicking, if anyone cares, that is.

Turning older every year.
Lost my hair.
Grew a beard (to compensate
Broke my right elbow during a buggy kite session (a whole story, some time later).
Broke my speed record with 78kg/h .. in a buggy ... powered by only .. the wind ..speaking about thrills.

My building hobby is not dead, just lingering somewhere in my entity.

Cya soon !
Posted by DutchRC | Yesterday @ 11:02 AM | 1,280 Views
Howdy people

last week I released a video of my first flight with the Esky 300 v2 And eventhough it flew pretty o.k. I thought I should be able to do better :P (I had not flown a heli in years).. sooooo take 2 today!

Let's see if I can actually fly it as bit better this time

Esky E 300 v2 Helicopter! Flight Test RETRY :P (9 min 54 sec)

Posted by lasakro | Yesterday @ 01:11 AM | 2,302 Views
Built 2019- First large heli

ESC- Castle Talon 120 HV
Motor: Align RMC-BL800MX 520KV
Batteries: Gens ACE 5Ah 6S 45C GA-B1018
Main Blades: RotoStar 690mm
Cyclic Servos: KST DS725MG
Tail Servo: KST DS525MG
Receivers: FrSky RX8R Pro & X8R
FBL Controller: Bavarian Demon AXON
Telemetry: FrSky Smart Port Sensors SP2UART (Voltage), SP-RPM (RPM & Temp)
Gearing: Pinion- 13T, Main- 115T
Posted by phil alvirez | Sep 18, 2021 @ 02:58 PM | 3,290 Views
perhaps some data on our source wouldnt hurt.
how were invented and developed is a fascinating story. enjoy.
https://en.wikipedia.org/wiki/Lithium-ion_battery
Posted by unboxingexp | Sep 18, 2021 @ 11:27 AM | 3,652 Views
Works great! Gonna stick with ELRS, it's a great and affordable radio link system. If you can't update your BETAFPV TX open the casing and hold down the button on the PCB . Some early TX were faulty.
BETAFPV nano ExpressLRS 2.4GHz TX module (1 min 37 sec)

Posted by Tazkiller85 | Sep 18, 2021 @ 05:05 AM | 4,147 Views
🧐Yep Les Amis,
Le paquebot des airs ! lol. Nous testons aujourd'hui le monstre de chez HGLRC et REKONFPV, le Rekon 7 Pro. Un Kwad 7 pouces très bien équipé, GPS, F7, Buzzer autonome et VTX de 800mW pour cette version analogique. Si on met de côté le souci rencontré sur notre exemplaire et résolu avec les hélices bipales, cet engin est un digne successeur de la lignée des Rekon ! Un tarif très raisonnable pour un appareil de cette qualité de finition et d'équipements, un châssis bien rigide et pas mal de place pour installer tous les accessoires voulus. Le vol est doux, précis et extrêmement fluide. Premier 7 pouces pour Yacine et moi, nous avons été agréablement surpris et assez impressionnés par son pilotage, un peu de douceur dans ce monde de brutes ! lol ... Prenez soin de vous (et des autres) et merci à tous pour votre soutien .

REKON 7 PRO HGLRC & REKONFPV - Review Test Démo - Problème résolu, pour l'instant ... (1 hr 0 min 9 sec)


🧐NOTATAZ : 17/20 Impressionnant mais .... Affaire à suivre.

Chez BANGGOOD
- REKON 7 PRO analogique (Coupon Drones6) : https://bit.ly/3lFY8MV
- REKON 7 PRO numérique (Coupon Drones6) : https://bit.ly/3CoAxHb
- Li Ion 6S 3000mAh Auline : https://bit.ly/3hIkuvQ
- Lipo 6S 1800mAh : https://bit.ly/3lw3slM
- Chargeur conseillé pour lipos : https://www.banggood.com/custlink/3mvE6ivWS2

Chez REKONFPV
- REKON 7 PRO analogique : https://bit.ly/3kai1vO
- Châssis REKON 7 PRO : ...Continue Reading
Posted by Martian McFly | Sep 18, 2021 @ 02:32 AM | 4,350 Views
So, I decided to take the long range rig on holiday and here's the footage, I managed to get a round 4Km out before my balls reclined back in to my stomach and turned back. I'm pretty sure that I could have go a lot further but didn't fancy the walk if the worst happened.

A beautiful place to visit and fly!

Relaxing Long Range Holiday FPV 👽 (10 min 37 sec)


Enjoy!
Martian
Posted by Zzx | Sep 18, 2021 @ 12:59 AM | 4,463 Views
Found a park where I live and it had a massive hill at the other end, lets climb it.

FPV Hill Climb in the Tonka Summit Rover. Sept 17th 2021 (4 min 40 sec)

Posted by Teo40 | Sep 18, 2021 @ 12:36 AM | 4,484 Views
I bought this plane. AA 2.10, 6s battery, motor with reducer. the old owner says he bought it in China where he lived for several years. does anyone know him? some tips on how to make it run a little more as it is very slow. the measures are not written on the blade
Posted by K2-tokyo | Sep 17, 2021 @ 10:18 PM | 4,754 Views
This is my short memo concerning the Radio Master 16S for an Eachine E129 and a Blade Nano S2 (never for 3D).

I. The method of the firmware upgrade for Eachine E129 helicopter, and OMP M2(original receiver)

1, At first, you had better upgrade the transmitter firmware to the newest one by using any PC software OpenTX Companion:
https://www.radiomaster.nl/how-to-up...omaster-tx16s/

2, The internal multi-module upgrade for AETR-type protocol (E119, E129, OMP-M2);
See
https://www.radiomaster.nl/how-to-up...omaster-tx16s/

Use the Multi-Module firmware in
https://downloads.multi-module.org

Select a module: RadioMaster TX16S Internal Module (4-in-one)
Firmware version: 1.3.2.77
Then download: multi-stm-serial-aetr-v1.3.2.77.bin

Transfer this file into the "FIRMWARE" folder in the SDcard in the transmitter by using the USB-cable. Then, after cut the USBcable, do the firmware flashing operation by the transmitter!

3, You can find E129, OMP in the internal multimodules.


II. Blade Nano S2 helicopter

1, (channel order). My main receivers are of Futaba, and so my default channel order is AETR in RADIO SETUP.
I know the channel order of blade helicopters is TAER, but in the setting of RadioMaster 16S the channel order of NanoS2 should be AETR. (I do not know why).

2, Create a new model; choose
(i) plane (ii) motor: yes CH3, (iii) Aileron: one, CH1, (iv) flaps: no, (v) Ele, Rudder: CH2 A, CH4 B, (vi) Yes.

3, (Mode Set up)
Internal...Continue Reading
Posted by cuavlindy | Sep 17, 2021 @ 08:38 PM | 4,758 Views
CUAV P8 is finished mass production and having stocks now .come and know more about us in store.cuav.net.
Posted by djmoose | Sep 17, 2021 @ 06:56 AM | 5,846 Views
I wanted to make a short video to show the details of these really nice padded wing bags from Extreme Flight RC. I'll unbox and go over the features to give you an idea of what is available if you're in the market for a set of nice wing bags for your favorite model airplane.

https://extremeflightrc.com/
50cc Padded Wing Bags - https://bit.ly/3nsNTOn
35cc Padded Wing Bags - https://bit.ly/3k8heM6

Extreme Flight RC Padded Wing Bags - Unbox and Review - 50cc and 30cc (6 min 1 sec)

Posted by Jack Crossfire | Sep 16, 2021 @ 11:00 PM | 6,792 Views
So the lion kingdom finally got a set of retaining rings & the tool for ending the motors slipping off. It should now be possible to use wide offroad tires. 1 fell swipe of the full faith & credit ended a year of problems. Full faith & credit is sometimes worth a lot more than being creative.

The tool is too big to fit in the 6mm retaining rings, but is necessary to put them on. Once on, the tool can easily fit to take them off. There is a choice between angled tips & straight tips, but they're all different sizes. The smallest tip is only straight. What helps is using a metal shaft to twist apart the retaining ring just enough for the tool to get in.